Info regarding sound or other queries within (NO CODE REQUESTS/code POSTING)

rescanned and still nothing

 

did you just rescan or did you do a factory reset on your box as that is prob what you will need to do to get them back otherwise your box is scanning the channels it already has stored

 

Just rescanned

 

1 make sure your incoming cable is connected to the cable input on the box and not going thru a splitter

2 Make sure you have a scart lead connected to the tv on the box and connected to AV1 or EXT1 only
also make sure you check this as been a proper working scart

3 Next go to menu factory settings and press ok put in 0000 code press ok to clear all data

4 Make sure you turn the box off at the mains for 1 min and turn back on again

5 Accept the language

6 Installation put your provider in the top box then do an auto scan wait for this to finish even if you see
failed a few times this is normal so just be patient till it has finished

7 When this is finished exit out to main tv screen

8 Then go to menu and press 1570 on the key pad into secret menu and turn the EMU on which has been switched off by default

9 Exit out 3 times to main screen and put the box on to the tv channel sky sports 1 and wait for this to update this
could go up as far as 250% so again be patient and wait also do not change the channel while
this is been done or you will have to start all over again

 

can u do this without changing the channel line up

 

not unless you know the freq that the other channels are on and just scan that freq otherwise no

 

thanks

 

Has there been a change in Dublin n** codes today....thanks all

 

Nope

 

there was a little turbulence on fri

 

And Saturday

 

hi i have lost all disney and film channels can anyone tell me if it is the codes or is there a new update needed as i tried the codes listed and it has not solved my problem.
also has anyone got the channel file so i can put the channels back in order after i have done a factory reset many thanks for any help.[/color][/color]

 

would help if you said where your living and what box you have

 

Guys can u get racing uk in Liverpool?

 

What is everyone using on the Starview 1 box in dublin now I cant seem to get mine to autoroll anymore on 257 or 400

 

Depends on if you have a CLONE or GENUINE b0x

 

i take it 257 fixed wont work on a gen box ! i put it on two clone boxes well i think they were clones it works on one but not the other i dont want to put 4 on it case it kills the box

 

Yes 2.57eE__FIXED will work on both genuine and clone box as it is only a fixed version of the V4.00 for the genuine one

 

Fergus thanks again for getting me sorted...your a genious

By the way if anyone is looking for a Free 9pin female- 9pin female null modem cable, as i have a spare one... send me a PM and i can arrange a meet/ or can post it if your across the water (No Charge) Hope this is ok Mr Moderator