Info regarding sound or other queries within (NO CODE REQUESTS/code POSTING)

Use IFA and reflash a new image BTW you have multiposted and this is not a Dreambox thread.

 

hi guys can anyone tell me which firmware and loader i should use for the starview 2 the box as at the moment it has got api ver: 4.50ee

 

Dont change it unless you are having problems 4.50 should be fine.

 

4.54 would be the best bet as 4.50 has a faulty epg that makes it freeze and reboot.

but otherwise use 4.50 if this doesn't bother you.

 

can anyone tell me how to use the channel editor and load it onto starview or which thread i could check out to read about it and lads thanks for the previous help

 

Use SVCE1044 for the box. You will find this and instructions on how to use it in Eamos at the bottom of my post.

 

thanks scouser

 

i have got a usb to serial 9pin male and connect that to the null modem cable and select the com port it is attached to and it keeps comming up flash failed anyone got any ideas

 

is the com port in device manager same as one in loader?

 

it says comport4 in device manager and i selected the same on the loader

 

i had similar problem with usb connection also found it very slow to download file causing it not to flash properly? in the end had new connection put in computer to bypass usb. so no help to you ,hope scouser can help you.

 

Well according to my device manager i have 3 ports but gt rom says 4 so try picking all ports one at a time and also make sure your box is plugged in and on standby from an unscrambled channel.

 

steo tried all the ports and the only one it is recognising is comport 4 and it just keeps saying flash failed anyone got anyother ideas

 

If someone you know has a pc with an rs232 connector on the back you could use that without your usb converter as com 1.

 

thanks steo but don't know anyone with a com port

 

Hello All,
I have successfully loaded 4.54eE on "TheBox" and scanned and found all channels. My problem is that I can't open my uploaded channel file using SVCE 1044. I get an address error. Where am I going wrong? any ideas or info is appreciated. I also tried opening the file "Dublinchannelfav301207forlatestfirmware4.54ee" from eko.4shared but I get the same error there

Location is Dublin CC is N*L.

 

magoo have you tried right clicking on my computer then on manage then device manager then ports(com&LPT) click on the cable that was installed with the driver software that should have come with the cable then advanced and then assign it to com 1 2 3 or 4? also after the flash fail sign comes up give it a second as it may change to download complete. if your using vista it may take a few tries or even a restart after you've changed the com port

 

are you using the loader to upload the cdf to the box?

 

Hi axxxo,
I have no problem downloading either channel file to "TheBox" I am trying to edit the favourites by opening the file in SVCE but No can do. This was all OK in the previous version 4.50eE. ideas??

 

use gt rom and pick channel dump, browse it and press download.