Info regarding sound or other queries within (NO CODE REQUESTS/code POSTING)

Ok anto no bother all that stuff should have been in the one folder zipped and ready to use loader firmware logo file and the tut to go with it dont know why it is not

 

Would make life easier for me (blonde and all that) LOL

 

Thanks Fergus, it's great to get clarification, but there is no confusion really this is what I had originally posted, I know it was a little long winded but exactly as you have clarified >>>>

Hi Antoinette, here is the correct procedure for flashing The Box with versions above 4.50 and 4.51, hope it clarifies things for you.

Seen a few posts with people having problems when flashing Starview 2 The Box with firmware versions over 4.50 Ireland and 4.51 UK, below is the correct procedure and you must load 2 bin files in the correct order if you want to upgrade :-

As regards the 4.52,53,54, using GTRom 4.00 is no good, that's where people are going wrong - this is the procedure :- From V4.50/51 you must - Use the New Improved GTrom Loader Ver 4.03 for example >>>>>>>

First flash thebox_H20070814_452eE_api.bin to your box with the new GTRom.4.3
(select as App file only)

Then flash thebox_logobg.bin to your box using the new GTRom.4.3
(select Background Data File)

Version 4.53 For UK

If you are upgrading from 4.51 or earlier you must flash 4.53 first. then flash the logo file. If you already have the 4.52 on just flash the 4.53 straight on, no need for the logo file, you must use the 4.3 loader.

Version 4.54 for UK & Ireland

If you are upgrading from 4.51 or earlier then flash 4.54 first then afterwards flash the logo file. If you already have 4.52 on or later then just flash the 4.54 straight on without it. You must use the new Loader Software GTRom Ver.4.3

 

yep malci but you do not have to flash with the v4.52 and then the v4.53 you can flash from any file straight to the v4.54 as long as you put the logo file on once the firmware is v4.51and under

 

Cheers Fergus, I do understand that, as I said, maybe I was being a bit long winded in quoting it from the very beginning, but I stated that at the end of post. Thanks and Take care.

 

you to malci take care and have a good night talk soon

 

Will do Fergus, about to jump into bed now actually, early dart in the morning, Thanks again Cheers.

 

Thanks again Malci for all your help you too Ferg, be lost without you

 

Anytime Antoinette, Im away now so I will bid you goodnight.

 

All understood malci.

Thanks for all the Info ;-)

-

 

im about to put new firmware in the genuine starview 1 2.57 and 2.57 fixed do i use the same software 4.00 gt rom as i used to get the 2.57 fixed in. Also do i use use the firmware 4.00

 

put this one on it CryptStar-v1.4-Core257.bin and you can use the rom 4 software all of which you can find in the link under my sig

 

Will do mate, thanks

ps will that be safe with 257 fixed

 

safe for clones and first gen fire away any hassle pop back

 

hi guys

I just took delivery of a starview 3 the box super. it is brand new so i was just wondering is there anything i should do to the box or is it ok to just flash away with the new firware and help plz

 

Hi Magoo, Yep it will probably have no firmware on it if it is new, they are provided as FTA receivers, so you will have to flash it, even if it has firmware on (which is doubtful) you will do no harm flashing it anyway, so carry on - you will find an easy guide at the link here, courtesy of Celtic >>>>>>
http://forums.afterdawn.com/thread_view.cfm/663923

All the firmware is in Eamo's FTA Library at the bottom of my post, it is All In One loader for the SV 3 Super, good luck.

 

thanks malci was not sure

 

No problem, just go ahead Cheers

 

hi guys

can anyone tell me which is the best version of firmware to use on the starview 3 super box

 

refer to eamo's library and you'll have all you'll need for everything