Info regarding sound or other queries within (NO CODE REQUESTS/code POSTING)

Cable input is the correct one

 

When you say wall to Starview, please check that coax lead is plugged into TV part of the N** Box and not in the FM side of the N** box, (as this is where I have seen this exact fault before).

You should then plug the other end of the coax into the cable int on the back of the Starview. Your scart connection goes from TV out scart on the back of the Starview, (this will be labelled as such on the back of the SV), to any free scart connection on the back of your TV.

 

Noodle you have to read this and do exactly as we say first take out all the leads out of the box

Then get the lead coming from the wall only and connected to cable input on the back it says cable input on the back of the box so look at the back of it before you put it in

Next get the Scartlead only and plug this into the back of the box where it says tv

Then get the other end of the scartlead and put this into the tv slot on your tv

DO NOT PUT ANY OTHER CABLE ANYWHERE ELSE SO YOU SHOULD ONLY HAVE 2 WIRES COMING OUT OF YOU BOX ONE TO THE WALL AND THE SCART TO THE TV OK

 

ok currently at work but will try that as soon as i get in....im guessing i factory re-set then auto scan, emu on and tda the channels will be there.....i have my fingers crossed. i'll let u know as soon as i've done it

 

If you do what i said in the last post you should have no problem 2 wires only from box 1 from wall to box and the other SCARTLEAD only to the tv

 

i think i did that last night but nothing.

also did the following connection:
wall to starview and then a cable from the starview to tv
and scart from starview from starview to tv, scart dvd to starview and tv to dvd.

did a factory re-set then auto scan which found 158 channels but the only ones visable were euro news, city ch, rte 2 and bubble hits all others were scrambled

 

You should be getting 173, please check that you are plugged into the TV side of your N** box and not the FM side, (On the N** box it has FM & TV RF connectors)

 

Did u use N*L as your provider when u autoscanned ?

 

YOU ARE STILL USING 3 CABLES USE ONLY 2 USE 1 CABLE FROM THE WALL AND 1 SCART LEAD NOT 2 CABLES AND A SCART LEAD YOU ARE USING 2 CABLES AND SCART WILL YOU READ WHAT WE ARE TYPING FOR YOU 2 LEADS ONLY FROM BOX

look what you have said you are using 2 leads 1 from wall to box 1 from box to tv and then scart from box to tv that is 3 wires not 2 as you have been told i dont know how many times 2 wires only

 

lol getting heated in here i see!!!

 

Well where have you been hiding i thought the aliens had got you since the last day i spoke to you

 

nope been away for a few days... was in the uk visiting mates... heading out now will pm later!!!!

 

No bother should be here ok

 

Noodle, Who's your cable provider ??. If your starview is tuning in channels, but they are "bad or scrambled" it sounds like a "key" issue.
If you can see starview menu on your tele, then your connections from starview to tele are ok, if it's scanning in 158 channels, then your cable connection is fine too. If you have NThell, you should be getting 176 channels. You need to let us know who your cable provider is, and what provider setting you use when doing an autoscan, also, it might help to let us know what general area you are in. You only need the cable from the "cable output" from the starview to the tele if you want to have basic channels on the tele also. (eg, if you want to switch off starview and still be able to watch basic channels)

Post this info........
Cable Provider

From the CAS Menu, (menu 1570) Provider ID
Key Data 00
Key Data 01
EMU on or off ??

Also, are you waiting long enough for keys to update ??

 

ok got home tried it with 1 connection...sorry i did understand what u were saying just didnt have time to try it and was telling u what i had already tried.

did factory reset and autoscan and found 173 channels but still most are scrambled..i can view a few i.e euro news, city channel and bubble hits

btw

provider is ntl 5401

emu is on

codes are same as whats on here

how long are u suppsed to wait for update

 

When you did factory reset did you turn off the box at the back and then switch it back on again

Also when you do a factory reset the EMU is turned off so check again

 

yep.turned off the box then turned it back on..did a factory reset and then auto scan

 

also did you check the EMU as it is switched off by default so check this also can you put up the codes here that you have on your box both 00 and 01 for me thanks

 

turned emu on and exited out..still scrambled

i've just turned the staview off then on and did a factory re-set and currently doing auto-scan. i'll let u know whay happens

 

ok 170 channels found..exited out turned emu on

the codes in nagravision are

01 A9 86 6E EA 39 EA 09 49

how do see what the 00 codes are