Info regarding sound or other queries within (NO CODE REQUESTS/code POSTING)

Hi Richy, have you tried the mobile phone trick. If you have a mobile with a camera, put it into camera mode, point the remote at the camera lens, and press a button on the remote, you should see the diode flashing.
If not, try new batteries. I know, I know, "but I just put new batteries in". As with anything, new batteries can be dead, so just to eliminate it, try more batteries, if it still doesn't show up on the camera, then you can be pretty certain the remote is knackered.
If you can see the light flashing away on the remote, the next move is to take the cover off your box. There should be a small cable going from the front panel, to the main board, ending with a plug. This cable/plug may be loose, even in a brand new box. Disconnect the cable, and put it back on again, making sure you give it a good push, for a good fit.
If that doesn't do it, sorry, no idea at the mo.

 

Bezzyboy, you said they had version 4 firmware on them. Try the bad flash process, as you have been, i.e. start the gtrom loader, load up your firmware .bin file, click download, and then turn on the box.
This time, try an older version of the firmware, say 2.56.

I assume these are genuine boxes, not clones.

 

hi eamo yes tried the camera trick sometimes the led just flashes constantly without pressing anything sometimes its on permanantly sometimes it wont light up at all tried 3 sets of batterys and i've got 2 remotes that do this its a pain in the ass!

 

hi guys anyone with an idea if eurovox will work in Athlone ch***s analogue cable? and if it does how many channels can it receive?

 

It will not work on analogue only digital.

 

thanx scouser

 

how can i know aline is either digital or analogue?

 

You could check your bill from Chor*s and see does it say on that ?

 

Hello lads just a quick question a friend of mine just got a starview2 its got the uk firmware on it 451,its working grand but just wondering will it affect the box later on and should he change it to 450

 

Yes it will please put the v4.50 for the irish market on it later on it might not autoroll the codes if they change

 

Cheers fergus ill get on to that straight away

 

No problem let us know if it goes ok for you also please remember to wait after you see the 100% for another 50 seconds for the second pop up on the screen to say complete before disconnecting the leads ok

 

Will do thanks

 

hello all. please be gentle newby here.

ive had starview box for 6 mnths now with 2.57e software installed.

but when i do a rescan i cant seem to get e4+1 nor the new virgin 1 channel. ( i know it doesnt start until tonight but my mate has the welcome screen showing on his legit box now,)

does anybody know how to get these channels.
do i have to manually enter frequencys and if so does anybody know what they are and how to do it.

be easy on me i expect this has been covered before but i cant find it.

i know that if you scan the box the channels should appear at end of list as numbered channels but all i get is the odd ppv movie .

thanks in advance

 

You will find it has replaced FTN.

 

thanks for that scouser.
just found it with your help , now am i being thick but i cant find channel 4+1 ( not e4+1 as i said before) or is it not being broadcast in london c+w area.

thanks again

 

Where are you and what provider are you using?

 

im in west london ub2 area . virgin media ex c+w are my provider

 

Not 100% sure try 434750 if not an autoscan should find them for you.

 

manual scanned and found it plus some others i didnt know i was missing.

top man thanks very much