1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

INSTANTCOPY 1st disc coaster, 2nd disc burns - everytime

Discussion in 'DVDR' started by shugaloaf, Feb 16, 2007.

  1. shugaloaf

    shugaloaf Member

    Joined:
    Mar 5, 2006
    Messages:
    12
    Likes Received:
    0
    Trophy Points:
    11
    Please help. I have tried everything to find out about this error with no luck. Basically what happens is I rip the disk 9either to HD or just disc to disc) and everything is fine. It says to insert a blank disc so it can record. EVERY TIME I insert a disc it wastes the first one but the second one burns fine. What could be causing this? Why would #1 die but #2 always burn with no problems?

    Specifics:
    Pioneer DVR-K16 drive
    Verbatim 16X DVD-R

    A copy of the error is below. Any ideas?


    [​IMG]
     
  2. shugaloaf

    shugaloaf Member

    Joined:
    Mar 5, 2006
    Messages:
    12
    Likes Received:
    0
    Trophy Points:
    11
    Sorry looks like the image didn't come through.
    Also, let me add that I have tried every suggestion below. I also have auto-notification turned off in the drive properties, using TweakXP AND in the registry (i thought that may have been the problem). At first I thought maybe i had a bad batch 9although verbatim are usually good) but the pattern is too precise. 1st bad, 2nd good - every time. there must be something else.

    Here is the error:


    ***begin error***

    Hardware error:
    Write 32768 sectors at position 112

    Error Information:
    Writing was stopped because of a "buffer underrun". The disc is unusable. To prevent a "buffer underrun" and increase the efficiency of data writing, please try one of the following:
    -If your drive supports "Burn Proof" enable it.
    -Reduce writing speed
    -Enable "Write to hard disc first" option
    -Do not start any application during data writing.
    -Set the data transfer mode to DMA.
    -Disable any screen savers during data writing.
    -Deactivate Power Management and Windows Active Desktop.
    -Defrag HD.
    -Uninstall any other recording software.
    -Disable Ant--virus software.
    -Close any other program while burning.

    Sense Information:
    70 00 05 00 00 00 00 0E 00 00 00 00 21 02 00 00 00 00 00 00
    Command:
    2A 00 00 00 00 70 00 00 10 00

    ***end error***
     
  3. shugaloaf

    shugaloaf Member

    Joined:
    Mar 5, 2006
    Messages:
    12
    Likes Received:
    0
    Trophy Points:
    11
    I believe I've found the answer. If you leave AnyDVD running while trying to burn with Instantcopy I think it causes problems. it seems that as Instantcopy starts to burn anyDVD will try to read the blank disc causing an error.

    I may be wrong but disabling anydvd has allowed me to burn trouble free for 8 discs now. I'll re-post if I continue to have any problem.
     

Share This Page