1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Invalid Field in Command / Invalid Track Info

Discussion in 'Copy DVD to DVDR' started by loncke, May 12, 2005.

  1. loncke

    loncke Member

    Joined:
    Apr 18, 2005
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    Can someone help me figure out how to get through these errors. I have NERO and have burning without problems and now all kinds of errors are coming up. These are the most recent two errors

    "Invalid Field in Command"

    and

    "Invalid Track Info"

    THANKS
     
  2. fasfrank

    fasfrank Active member

    Joined:
    Oct 15, 2003
    Messages:
    3,675
    Likes Received:
    0
    Trophy Points:
    66
    Can you post a Nero burn log?
     
  3. MindFaZer

    MindFaZer Guest

    I am having the same problem. I have been using Nero for the longest time and now all of the sudden I am getting the error message invalid field in command. The only things I did recently were d/l xp updates and java updates. I figured that might be the problem so I went to an earlier restore point but I am having the same problem. Can anyone help me figure out what's going on?
     
  4. squizzle

    squizzle Active member

    Joined:
    Apr 19, 2004
    Messages:
    2,271
    Likes Received:
    0
    Trophy Points:
    66
    Like Fasfrank said,
     
  5. MindFaZer

    MindFaZer Guest

    Okay here is my log file from Nero.


    JodyEmbler
    MindFaZer INC.


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 11/11/2003 8:49:52 AM
    Nero version: 6.3.0.0 (Nero Express)
    Recorder: <SONY DVD RW DRU-530A> Version: 2.1g - HA 1 TA 1 - 6.3.0.0
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <SONY DVD RW DRU-530A >Version: 2.1g - HA 1 TA 1 - 6.3.0.0
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST380020A atapi Port 0 ID 0 DMA: On
    DiskPeripheral : Maxtor 6Y060L0 atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8160B atapi Port 1 ID 0 DMA: Off
    CdRomPeripheral : SONY DVD RW DRU-530A atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8160 F: CDRom0
    SONY DVD RW DRU-530A G: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 511MB (523808kB)
    Free physical memory: 352MB (361448kB)
    Memory in use : 30 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    24.5.2005
    ===== Disc-Copy over image - 1st step : Copy to image ...

    10:34:50 PM #1 Text 0 File Reader.cpp, Line 118
    Reader running

    10:34:50 PM #2 Text 0 File Writer.cpp, Line 124
    Writer Image Recorder running

    10:34:50 PM #3 Text 0 File DVDCopy.cpp, Line 241
    DVD Track-Information from source disc
    S01 T01 Con 0x14 Start 0 Len 2287824 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0)

    10:34:50 PM #4 Text 0 File DVDCopy.cpp, Line 334
    Max -1 tracks of 1 allowed to copy
    1: 0 - 2287824 = 2287824, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

    10:34:50 PM #5 Text 0 File Burncd.cpp, Line 3094
    Turn on Disc-at-once, using DVD media

    10:34:51 PM #6 Text 0 File DlgWaitCD.cpp, Line 239
    Last possible write address on media: 2147483646 (477218:35.21)
    Last address to be written: 2287823 (508:24.23)

    10:34:51 PM #7 Text 0 File DlgWaitCD.cpp, Line 244
    Write in overburning mode: FALSE

    10:34:51 PM #8 Text 0 File DlgWaitCD.cpp, Line 2068
    Recorder: Image Recorder;
    CD type reading failed
    ATIP Data: ?

    10:34:51 PM #9 Text 0 File DlgWaitCD.cpp, Line 405
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    10:34:51 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 779
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 - Data (mode 1))
    2 indices, index0 (150) not provided
    original disc pos #0 + 2287824 (2287824) = #2287824/508:24.24
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2287824 blocks [ Image Recorder ]
    --------------------------------------------------------------

    10:34:51 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 948
    Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x40; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4685770752, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    -150 | lead-in | 0 | 0x00 | 0x41
    -150 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2287824 | lead-out | 1 | 0x00 | 0x41

    10:34:51 PM #12 Phase 120 File dlgbrnst.cpp, Line 1800
    Creating the image for burning

    10:34:51 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2264
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    10:47:54 PM #14 Text 0 File WriterStatus.cpp, Line 115
    < Image Recorder > start writing Lead-Out at LBA 2287824 (22E8D0h), lenght 0 blocks

    10:47:54 PM #15 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    10:47:56 PM #16 Phase 121 File dlgbrnst.cpp, Line 1800
    Creating Image completed successfully



    ===== Disc-Copy over image - 2nd step : Burn the image ...

    10:48:13 PM #1 Text 0 File Reader.cpp, Line 118
    Reader running

    10:48:13 PM #2 Text 0 File Writer.cpp, Line 124
    Writer SONY DVD RW DRU-530A running

    10:48:14 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 363
    Image was written as DAO.
    DAOI:
    MediaCatalogNumber = ''
    TocType = 0x40
    Finalized = 1
    First/Last Track = 1 / 1
    1: ISRC = ''
    Blocksize = 2048
    TrackMode = 'TRM_DATA_MODE1'
    TrackConfig = 0x00
    First/Last Index = 0 / 1
    Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 390803456
    CUES:
    0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
    1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
    2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
    3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=508:24.24 ( 2287824)
    MTYP: Mediumtype = DVD (old format) (0x1C)

    10:48:15 PM #4 Text 0 File Burncd.cpp, Line 3094
    Turn on Disc-at-once, using DVD media

    10:49:25 PM #5 Text 0 File DlgWaitCD.cpp, Line 239
    Last possible write address on media: 2297887 (510:38.37)
    Last address to be written: 2287823 (508:24.23)

    10:49:25 PM #6 Text 0 File DlgWaitCD.cpp, Line 244
    Write in overburning mode: FALSE

    10:49:25 PM #7 Text 0 File DlgWaitCD.cpp, Line 2068
    Recorder: SONY DVD RW DRU-530A, Media type: DVD-R
    Disc Manufacturer: TTG02 -
    Disc Application Code: 64, Disc Physical Code: 193

    10:49:25 PM #8 Text 0 File DlgWaitCD.cpp, Line 405
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)

    10:49:25 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 779
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 - DVD-ROM)
    2 indices, index0 (150) provided
    original disc pos #0 + 2287824 (2287824) = #2287824/508:24.24
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2287824 blocks [SONY DVD RW DRU-530A ]
    --------------------------------------------------------------

    10:49:25 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 948
    Prepare recorder [SONY DVD RW DRU-530A ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x40; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4685463552, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2287824 | lead-out | 1 | 0x00 | 0x41

    10:49:25 PM #11 Phase 36 File dlgbrnst.cpp, Line 1800
    Burn process started at 4x (5,520 KB/s)

    10:49:25 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2264
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    10:49:25 PM #13 Text 0 File dlgbrnst.cpp, Line 1658
    Set remaining time: 14:10,891 (850891ms) -> OK

    10:49:25 PM #14 Text 0 File DVDR.cpp, Line 1424
    Recording mode: Sequential Recording Mode

    10:49:25 PM #15 Text 0 File Mmc.cpp, Line 19397
    Set BUFE: Power-Burn -> ON

    10:49:25 PM #16 Text 0 File DVDR.cpp, Line 1539
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    10:49:25 PM #17 Text 0 File Cdrdrv.cpp, Line 7912
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Media Specific:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    10:54:12 PM #18 SCSI -1066 File Cdrdrv.cpp, Line 1430
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x059B0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x09 0x80 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    10:54:12 PM #19 CDR -1066 File Writer.cpp, Line 301
    Invalid field in command

    10:54:13 PM #20 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    10:54:15 PM #21 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    10:54:15 PM #22 Text 0 File DVDR.cpp, Line 1743
    EndDAO: Last written address was 622591

    10:54:19 PM #23 Text 0 File dlgbrnst.cpp, Line 1658
    Set remaining time: 0:00,000 (0ms) -> OK

    10:54:20 PM #24 Text 0 File dlgbrnst.cpp, Line 1658
    Set remaining time: 0:00,000 (0ms) -> OK

    10:54:20 PM #25 Phase 38 File dlgbrnst.cpp, Line 1800
    Burn process failed at 4x (5,520 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.02.60a, size=17232 bytes, created 10/9/2003 12:27:20 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:42 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
  6. squizzle

    squizzle Active member

    Joined:
    Apr 19, 2004
    Messages:
    2,271
    Likes Received:
    0
    Trophy Points:
    66
    you got this
    and Nero says this

    13. I get a 'SCSI target error' when using Nero/Nero Express. How do I resolve this problem?

    This error be caused by the following:

    * Normally caused by CD-R or CD-RW media the recorder is unable to work with. Or the media could be defective, dirty or just not compatible with the recorder.
    * Cables are known to cause this: loose cables, damaged cables, loose power connectors, etc.
    * Defective recorders are known to cause this. Test with another demo software to rule out software as the cause. If two software programs have the same symptom, your recorder may need service.
    * If the drive is being polled by another software's driver, it could hang the bus. Uninstall any other CD recording software you may have had on your system, as well as Nero. Then use Registry cleaner software to clean you registry. At last try a fresh install of our latest Nero release.
     
  7. MindFaZer

    MindFaZer Guest

    Thank you for the help. I will try another shareware program and if that doesn't work I will just go and buy another burner.
     
  8. squizzle

    squizzle Active member

    Joined:
    Apr 19, 2004
    Messages:
    2,271
    Likes Received:
    0
    Trophy Points:
    66
    WHOA! Don't go buying a new burner just yet! Get some different discs. Better ones. If you buy in a store I hear Verbatim discs are good, if you buy online go with Taiyo Yuden.

    Check out a firmware update if there is one. Go to the manufacturers website and get one there. Just make sure you get the right one for your model burner.
     
  9. kiki1313

    kiki1313 Member

    Joined:
    Jun 18, 2005
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    Hello everybody.
    I have almost the same problem with burning CD's. Everything before was ok and I had no problem with burning but since I reinstall my Win XP sp2 I got problems. Here it is my Nero log:
    --------------------------------------------------------------------
    kdn
    vdko


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 18:35:34
    Nero Version: 6.6.0.14
    Internal Version: 6, 6, 0, 14d

    Recorder: <TEAC CD-W552E> Version: 1.14 - HA 1 TA 1 - 6.6.0.14
    Adapter driver: <> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <_NEC CD-ROM CD-3002A >Version: C000 - HA 1 TA 0 - 6.6.0.14
    Adapter driver: <> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 6Y120P0 YAR4 nvidesm Port 0 ID 0 DMA: Off
    DiskPeripheral : Maxtor 6Y080P0 YAR4 nvidesm Port 0 ID 1 DMA: Off
    CdRomPeripheral : TEAC CD-W552E 1.14 nvidesm Port 0 ID 0 DMA: Off
    CdRomPeripheral : _NEC CD-ROM CD-3002A C000 nvidesm Port 0 ID 1 DMA: Off

    === CDRom-Device-Map ===
    _NEC CD-ROM CD-3002A F: CDRom1
    TEAC CD-W552E E: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1023MB (1048048kB)
    Free physical memory: 648MB (663912kB)
    Memory in use : 36 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    19.6.2005
    CD-ROM (ISO)
    01:25:53 #1 Text 0 File Isodoc.cpp, Line 6314
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : TAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    01:25:53 #2 Text 0 File Burncd.cpp, Line 2945
    TEAC CD-W552E
    BURN-Proof activated

    01:25:53 #3 Text 0 File Reader.cpp, Line 127
    Reader running

    01:25:53 #4 Text 0 File Writer.cpp, Line 122
    Writer TEAC CD-W552E running

    01:25:53 #5 ISO9660GEN -11 File geniso.cpp, Line 3297
    First writeable address = 0 (0x00000000)

    01:25:53 #6 Text 0 File Burncd.cpp, Line 3230
    Turn on Track-At-Once, using CD-R/RW media

    01:25:53 #7 Text 0 File DlgWaitCD.cpp, Line 267
    Last possible write address on media: 359848 ( 79:59.73)
    Last address to be written: 357964 ( 79:34.64)

    01:25:53 #8 Text 0 File DlgWaitCD.cpp, Line 279
    Write in overburning mode: NO (enabled: CD)

    01:25:53 #9 Text 0 File DlgWaitCD.cpp, Line 2433
    Recorder: TEAC CD-W552E;
    CDR code: 00 97 25 35; OSJ entry from: INFODISC Technology Co., Ltd.
    ATIP Data:
    Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
    Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

    01:25:53 #10 Text 0 File DlgWaitCD.cpp, Line 445
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    01:25:53 #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 357965 (357965) = #357965/79:32.65
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 357963 blocks [TEAC CD-W552E]
    --------------------------------------------------------------

    01:25:53 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [TEAC CD-W552E] for write in TAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 733419520, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    -150 | lead-in | 0 | 0x41 | 0x00
    -150 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    357965 | lead-out | 1 | 0x41 | 0x00

    01:25:53 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1111
    Removed 2 run-out blocks from end of track 1. Length: 357965 -> 357963.

    01:25:53 #14 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    01:25:53 #15 Text 0 File Burncd.cpp, Line 4114
    Cache writing successful.

    01:25:53 #16 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    01:25:53 #17 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 24x (3,600 KB/s)

    01:25:53 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2643
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    01:25:53 #19 Text 0 File Mmc.cpp, Line 21592
    Set BUFE: BURN-Proof -> ON

    01:26:00 #20 SCSI -500 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x045C0000
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    01:26:04 #21 SCSI -1066 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04BF0200
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x24 0x00

    01:26:04 #22 CDR -1066 File Writer.cpp, Line 311
    Invalid field in command

    01:26:04 #23 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    01:26:04 #24 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    01:26:08 #25 CDR -201 File WriterStatus.cpp, Line 200
    Invalid write state
    TEAC CD-W552E\H1 T1

    01:26:08 #26 TRANSFER -18 File WriterStatus.cpp, Line 200
    Could not perform EndTrack

    01:26:08 #27 Text 0 File Mmc.cpp, Line 16240
    <TEAC CD-W552E > start Close Session

    01:26:28 #28 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 24x (3,600 KB/s)


    Existing drivers:

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


    Can someone help me or just give me an idea where should I look for the reasones?
    Thank you in advance.
     
    Last edited: Jun 20, 2005
  10. squizzle

    squizzle Active member

    Joined:
    Apr 19, 2004
    Messages:
    2,271
    Likes Received:
    0
    Trophy Points:
    66
    Your DMA is off on all your drives, you should turn it on for your burner. Go into device manager and uninstall your burner (right-click My Computer, Properties, Hardware, Device Manager). Then reboot your computer and it should install it right away and you should be in DMA mode.
    If the DMA thing doesn't work, try changing media. Avoid Memorex, I suggest Verbatum with Super AZO Dye (should say it on the box).
     
  11. kiki1313

    kiki1313 Member

    Joined:
    Jun 18, 2005
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    "Your DMA is off on all your drives, you should turn it on for your burner. Go into device manager and uninstall your burner (right-click My Computer, Properties, Hardware, Device Manager). Then reboot your computer and it should install it right away and you should be in DMA mode."

    I tried this before but it didn't work. I uninstalled my burner from the Device Managger - rebooted the PC, then installed the new firmware and nothing happends. It was not the first time when I install the firmware. Is it possible if this is the reasone the burner not to work? Because I read somewhere how to turm on my DMA mode true the Device Menager component's properties but I have no such a properties in my Device Menager component.
    -------------------------------------------------------------------
    If the DMA thing doesn't work, try changing media. Avoid Memorex, I suggest Verbatum with Super AZO Dye (should say it on the box).

    I never use Memorex. Usualy I use Verbatum or LG media.
     
  12. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    @MindFaZer -

    in addition to squizzle's notes -

    - that's a bit long in the tooth now, 6.6.0.14 is out now.. i would upgrade...

    - that firmware's bang up to date, so that's cool.

    - DMA is off on the dvd-rom drive, this affecting the other drives..

    - don't know enough about this error apart from the obvious 'CD type reading failed' - sounds like it has a problem with that media

    - don't know much about these

    - good grief! - dunno what's going on with that first line, those numbers are off the scale...hmmm, crap media methinks!

    - drive doesn't like that media

    - i think this is a symptom of the other problems
     
    Last edited: Jun 20, 2005
  13. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    @kiki1313 -

    - [bold]edit out your serial number, before it gets stolen[/bold]

    - strange, this is blank, there should be references to atapi here - fixing DMA should sort this out.

    - DMA needs to be on for those drives - fix like this - http://home.comcast.net/~bbmayo/DMA.html

    - good news, firmware for this is up to date

    - splat!

    - strange, this is blank, there should be references to atapi.sys here - fixing DMA should sort this out.
     
  14. kiki1313

    kiki1313 Member

    Joined:
    Jun 18, 2005
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    @creaky

    Thank you for the detailed description about DMA. I'll try this later because I'm not at home but in the office where I work.

    As I remeber I was looking for this chanels (Primary and Secondary IDE Chanels) in my Device Manager and I had no such chanels :( But I'll try this again and will post the results.
    -----------------------------------------------------------------------
    Thank you for the advice about the serial. I deleted it.

     
    Last edited: Jun 20, 2005
  15. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    @kiki1313 - cool, but i'd edit that serial number out now as it could be half way round the internet by now...
     
  16. Malibu33

    Malibu33 Member

    Joined:
    Jun 22, 2005
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    hi, i had the same error, this is my log :
    "Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
    Nero Version: 6.6.0.13
    Internal Version: 6, 6, 0, 13c

    Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: TS00 - HA 1 TA 1 - 6.6.0.13
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA 0 - 6.6.0.13
    Adapter driver: <xmasscsi> HA 2

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 6B200P0 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : WDC WD400BB-00CXA0 atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 1 ID 1 DMA: On
    CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    TSSTcorp CD/DVDW TS-H552B E: CDRom0
    AXV CD/DVD-ROM F: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523760kB)
    Free physical memory: 52MB (53692kB)
    Memory in use : 89 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    23.6.2005
    ISO compilation
    2:12:56 #1 Text 0 File Isodoc.cpp, Line 6194
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : TRUE
    Simulate : TRUE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    2:12:57 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    2:12:57 #3 Text 0 File Writer.cpp, Line 122
    Writer TSSTcorp CD/DVDW TS-H552B running

    2:12:57 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
    First writeable address = 0 (0x00000000)

    2:12:57 #5 Text 0 File Burncd.cpp, Line 3167
    Turn on Disc-At-Once, using DVD media

    2:12:57 #6 Text 0 File DlgWaitCD.cpp, Line 260
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2143471 (476:19.46, 4186MB)

    2:12:57 #7 Text 0 File DlgWaitCD.cpp, Line 272
    Write in overburning mode: NO (enabled: CD)

    2:12:57 #8 Text 0 File DlgWaitCD.cpp, Line 2339
    Recorder: TSSTcorp CD/DVDW TS-H552B, Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AE1
    Disc Application Code: 64, Disc Physical Code: 193

    2:12:57 #9 Text 0 File DlgWaitCD.cpp, Line 438
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    2:12:57 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2143472 (2143472) = #2143472/476:19.47
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2143472 blocks [TSSTcorp CD/DVDW TS-H552B]
    --------------------------------------------------------------

    2:13:25 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [TSSTcorp CD/DVDW TS-H552B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4389830656, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2143472 | lead-out | 1 | 0x41 | 0x00

    2:13:25 #12 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    2:13:25 #13 Text 0 File Burncd.cpp, Line 4051
    Cache writing successful.

    2:13:25 #14 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    2:13:25 #15 Phase 28 File dlgbrnst.cpp, Line 1832
    Speed measurement started

    2:13:25 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    2:16:28 #17 Text 0 File WriterStatus.cpp, Line 116
    <TSSTcorp CD/DVDW TS-H552B> start writing Lead-Out at LBA 2143472 (20B4F0h), lenght 0 blocks

    2:16:28 #18 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    2:16:28 #19 Phase 29 File dlgbrnst.cpp, Line 1781
    Speed measurement completed: 17.2x (23.794 KB/s)

    2:16:28 #20 Phase 32 File dlgbrnst.cpp, Line 1832
    Simulation started at 8x (11.080 KB/s)

    2:16:28 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2609
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    2:16:28 #22 Text 0 File DVDR.cpp, Line 2267
    Recording mode: Sequential Recording Mode

    2:16:28 #23 Text 0 File Mmc.cpp, Line 21469
    Set BUFE: Super Link -> ON

    2:16:28 #24 Text 0 File DVDR.cpp, Line 2421
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    2:16:28 #25 Text 0 File Cdrdrv.cpp, Line 8438
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    2:16:45 #26 Text 0 File Cdrdrv.cpp, Line 1288
    02:16:45.640 - TSSTcorp CD/DVDW TS-H552B\H1 T1 : Queue again later

    2:29:55 #27 Text 0 File WriterStatus.cpp, Line 116
    <TSSTcorp CD/DVDW TS-H552B> start writing Lead-Out at LBA 2143472 (20B4F0h), lenght 0 blocks

    2:29:55 #28 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    2:29:55 #29 Text 0 File DVDR.cpp, Line 2658
    EndDAO: Last written address was 2143471

    2:30:17 #30 Phase 33 File dlgbrnst.cpp, Line 1832
    Simulation completed successfully at 8x (11.080 KB/s)

    2:30:18 #31 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 8x (11.080 KB/s)

    2:30:18 #32 Text 0 File ThreadedTransferInterface.cpp, Line 2609
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    2:30:18 #33 CDR -1066 File ThreadedTransferInterface.cpp, Line 1735
    Invalid field in command

    2:30:18 #34 TRANSFER -35 File ThreadedTransferInterface.cpp, Line 1735
    Invalid track info

    2:30:18 #35 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 8x (11.080 KB/s)


    Existing drivers:
    File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 16/06/2004 0:00:00
    File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 28/10/2003 11:02:00 (Prassi/Veritas driver for win 2K)"

    what's the problem?
    thks a lot
     
    Last edited: Jun 22, 2005
  17. squizzle

    squizzle Active member

    Joined:
    Apr 19, 2004
    Messages:
    2,271
    Likes Received:
    0
    Trophy Points:
    66
    You should also have an ASPI layer for Windows as well as an Ahead ASPI. Here's something explaining a bit about ASPI:

    [bold]<11>What is ASPI and do I need it?
    The term 'ASPI' is an acronym that stands for: Advanced SCSI Programming Interface. All the following terms are synonymous: ASPI layer, ASPI drivers, ASPI interface. The term 'SCSI' [scuzzy] is an acronym that stands for Small Computer Systems Interface. An ASPI layer consists of four files that 'lie between' various programs [software] and certain devices, such as CD/DVD-ROM drives and CD/DVD burners/writers [hardware]. Software programs such as CD digital audio extractors [commonly known as 'Rippers'] and CD-writing utilities such as CDRWin use/require ASPI drivers to 'communicate with' SCSI devices. Many people don't realize however, that the files contained in an ASPI layer are also used in systems that *don't* contain a SCSI adapter, or SCSI devices .. for things such as ripping CD audio and burning CD/DVDs.
    ASPI DOWNLOAD http://www.adaptec.com/worldwide/su...duct/ASPI-4.70&filekey=aspi_471a2.exe&sess=no[/bold]

    Your memory useage should be around 50% or so. Try to shut down some background programs running, such as Antivirus stuff, and don't multitask while burning.
    It appears you are trying to burn a multisession disc. If you're burning a DVD movie, do not use multisession. If you chose to burn DVD-Video files, this should be disabled unless you enabled it yourself. If you are making an ISO disc, you will need to disable multisession manually. This is probably a big part of your problem.

    Then your simulation goes OK (says completed successfully), but your burn fails as soon as you start it. So you might have some poor quality media on your hands. What kind of media are you using??

    Also, I have no clue what firmware you are using, so here's a link for updating that just in case: http://www.samsung.com/au/support/p...u/module/ssi/right/rmenu_opticaldiskdrive.sec
     
  18. Malibu33

    Malibu33 Member

    Joined:
    Jun 22, 2005
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    thks for the beginning, i use a burner "writemaster" for dvd +/-
    and a i try to burn on a EMTEC DVD -R
    sry my english is poor i am french :p

    EDIT: i installed programs u said me, i tryed again but i had the same error. I give you the new log :
    "Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 9:20:56
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
    Nero Version: 6.6.0.13
    Internal Version: 6, 6, 0, 13c

    Recorder: <TSSTcorp CD/DVDW TS-H552B>Version: TS10 - HA 1 TA 1 - 6.6.0.13
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA 0 - 6.6.0.13
    Adapter driver: <xmasscsi> HA 2

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 6B200P0 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : WDC WD400BB-00CXA0 atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : TSSTcorp CD/DVDW TS-H552B atapi Port 1 ID 1 DMA: On
    CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    TSSTcorp CD/DVDW TS-H552B E: CDRom3
    AXV CD/DVD-ROM F: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523760kB)
    Free physical memory: 225MB (230824kB)
    Memory in use : 55 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    23.6.2005
    ISO compilation
    5:08:02 #1 Text 0 File Isodoc.cpp, Line 6194
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : TRUE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    5:08:02 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    5:08:02 #3 Text 0 File Writer.cpp, Line 122
    Writer TSSTcorp CD/DVDW TS-H552B running

    5:08:02 #4 ISO9660GEN -11 File geniso.cpp, Line 3293
    First writeable address = 0 (0x00000000)

    5:08:02 #5 Text 0 File Burncd.cpp, Line 3167
    Turn on Disc-At-Once, using DVD media

    5:08:02 #6 Text 0 File DlgWaitCD.cpp, Line 260
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2143471 (476:19.46, 4186MB)

    5:08:02 #7 Text 0 File DlgWaitCD.cpp, Line 272
    Write in overburning mode: NO (enabled: CD)

    5:08:02 #8 Text 0 File DlgWaitCD.cpp, Line 2339
    Recorder: TSSTcorp CD/DVDW TS-H552B, Media type: DVD-R
    Disc Manufacturer: CMC MA - G. AE1
    Disc Application Code: 64, Disc Physical Code: 193

    5:08:02 #9 Text 0 File DlgWaitCD.cpp, Line 438
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    5:08:02 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2143472 (2143472) = #2143472/476:19.47
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2143472 blocks [TSSTcorp CD/DVDW TS-H552B]
    --------------------------------------------------------------

    5:08:02 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [TSSTcorp CD/DVDW TS-H552B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4389830656, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2143472 | lead-out | 1 | 0x41 | 0x00

    5:08:02 #12 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    5:08:02 #13 Text 0 File Burncd.cpp, Line 4051
    Cache writing successful.

    5:08:02 #14 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    5:08:02 #15 Phase 32 File dlgbrnst.cpp, Line 1832
    Simulation started at 8x (11.080 KB/s)

    5:08:02 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    5:08:02 #17 Text 0 File DVDR.cpp, Line 2267
    Recording mode: Sequential Recording Mode

    5:08:02 #18 Text 0 File Mmc.cpp, Line 21469
    Set BUFE: Super Link -> ON

    5:08:02 #19 Text 0 File DVDR.cpp, Line 2421
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    5:08:02 #20 Text 0 File Cdrdrv.cpp, Line 8438
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 30 00 10 20 00 00 00 - 00 00 00 21 00 00 00 00 .0.........!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    5:08:11 #21 Text 0 File Cdrdrv.cpp, Line 1288
    05:08:11.078 - TSSTcorp CD/DVDW TS-H552B\H1 T1 : Queue again later

    5:15:22 #22 Text 0 File WriterStatus.cpp, Line 116
    <TSSTcorp CD/DVDW TS-H552B> start writing Lead-Out at LBA 2143472 (20B4F0h), lenght 0 blocks

    5:15:22 #23 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    5:15:22 #24 Text 0 File DVDR.cpp, Line 2658
    EndDAO: Last written address was 2143471

    5:15:36 #25 Phase 33 File dlgbrnst.cpp, Line 1832
    Simulation completed successfully at 8x (11.080 KB/s)

    5:15:37 #26 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 8x (11.080 KB/s)

    5:15:37 #27 Text 0 File ThreadedTransferInterface.cpp, Line 2609
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    5:15:37 #28 CDR -1066 File ThreadedTransferInterface.cpp, Line 1735
    Invalid field in command

    5:15:37 #29 TRANSFER -35 File ThreadedTransferInterface.cpp, Line 1735
    Invalid track info

    5:15:37 #30 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 8x (11.080 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 8:53:02
    File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 16/06/2004 0:00:00
    File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 28/10/2003 11:02:00 (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 4:27:50 (Adapter driver for rec)
    File 'Drivers\xmasscsi.sys': Ver=3.44.0.0 built by: WinDDK, size=5504 bytes, created 20/12/2003 20:03:42 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) "
    :S
     
    Last edited: Jun 22, 2005
  19. squizzle

    squizzle Active member

    Joined:
    Apr 19, 2004
    Messages:
    2,271
    Likes Received:
    0
    Trophy Points:
    66
    You're using Memorex huh?? That CMC MAG company makes Memorex and is complete crap. This is probably your problem now. I suggest Verbatum with Super AZO Dye (should say it right on the box) if you buy in stores or Taiyo Yuden if you buy online.

    But it does look like you cleared everything else up pretty good!!
     
  20. Malibu33

    Malibu33 Member

    Joined:
    Jun 22, 2005
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    thks a lot m8 i'll follow your instructions :D
     

Share This Page