is there a fix for the digivox-t yet ??

already answered new fix v3300 in library under digivox terrrstial.

 

hi guys does this fix make the digivox t autoroll again an when i download the new version from the link it gives me v3300 do i just open that in downloader 10 and reflash box? merry christmas to all!!

 

yes downloader 10 and v 3300 believe it will make it autoroll have a good 1

 

thanks very much an this is the permanent fix for now so.?? also do i have to leave it on a special channel to kickstart update or do it come on handy enough?? Thanks for reply.

 

after you do the install, do your scan and do a manual if you are missing any channels and the turn on the emu sit back and relax and enjoy christmas day

 

factory reset first 0000 to delete ,reflash/update ,power off/on scan and emu on if it does not update within 15 secs try another channel.

 

Hi
My experience with Digivox-t version 3.3 as follows.
Flashed the box and had all the channels (120) but lost all the channel names and had a four digit number displayed on the front of the box which only occasionally changed when I changed channel.
I did a factory reset and auto scanned but could only get 60 channels and no names !!

With a manual scan I could get the rest of them but again no names.

I re-flashed version 3.2 did a factory reset and autoscan and got all 120 channels plus names back.
I reorganised the channels into my preferred sequence and uploaded a channel file to my PC.

I re-flashed version 3.3 and downloaded my new channel file back to the box and I have all my channels plus names .

However
Version 3.3 bought back that strange 4 digit code on the front of the box, as far as I can see it bears no relation to whatever channel I am watching.
Also the EPG has no program numbers on it, they are all zero (name is OK)
Changing channel with remote works fine.

 

well lads.
I am using a digivox-t
Ive done the listed above. However, there is one problem.
Im using the downloader version 4.03 as directed. I am using the firmware - digivox_ter_v3300.bin
When i attempt to down load the response is :Error: model name does not correct.
Can any one help out?
Cheers

 

You should probably use the Downloader10.exe that's in the software folder of the Digivox directory on the eamo's library 4Shared thing.

 

When try to flash digivox t with new firmware it is just coming up on laptop after a few seconds "Flash update failed"
any ideas ?
Thanks

 

Check you have the right cable - A Null Modem cable DB9F to DB9F.
Also, if you are using vista, you probably wont be able to flash the b0x. Try & find someone with XP & preferbly a stand alone pc.

 

Im new here and dont know if you talking about the old one when it was trying to update or the new one i was watching the football it when off so i did a scan and now there is bad or scrambled channel i did the key Emu if this helps heres some info..

Model Name Digivox
S/W V04-1.0001BK
Boot version 01
Date 29.Nov.2008
Can anyone help please

 

i think u have the old digivox silver not terrestial box with v4 as with all previous versions no longer works,there is v4200 that works in uk not convinced working in irl,or manual entry of data only cannot say anymore about that sorry RULES.
looking at date of version,possible new firmware on box but it has not updated yet0% try moving to another channel and see if it moves.

 

Hello I am looking for some help. I bought a couple of Digivox-T's recently for use on MMDS in Galway. I loaded the v3200bin and the boxes came up as okay. However when I scan I get no signal detected and the boxes run through the scan in a couple of seconds. Does anybody know if the MMDS signal in Galway is that different from the rest of Ireland that the frequency range is not within the Digivox-T range or if there a known issue for the tuner in these boxes. The MMDS antenna is powered directly if that has any bearing.

Thanks in advance for any help.

 

if you read the posts u will see v3200 does not work and to use v3300,next question what provider are u with c****s or n*l both have mmds and both have different boxes.dvb/c and dvb/t ?

 

Thanks for the reply. When I loaded 3200 it was the most recent. I am on N** in Galway. From the jist of what you are saying is it that I may need a DVB-C box as opposed to a DVB-T and if so would you recommend a particular one.

Thanks again.

 

u could go for digivox xl all black dvb/c box

 

Thanks Cactikid for the advice and help. All the best.

 

any chance some1 could upload a channel dump file for cork, the 3200 firmware is gone off the library and having no channel names is headwrecking to say the least,any chance astralw could upload his cdf

be a legend if you could

 

is anyone able to help with digivox t setup for kilkenny on c****s?