1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Kernel Loading... won't reflash using ifa

Discussion in 'Digital TV - United States & Canada' started by haris_49, May 14, 2007.

Page 3 of 3
  1. peebee05

    peebee05 Member

    Joined:
    Nov 21, 2006
    Messages:
    12
    Likes Received:
    0
    Trophy Points:
    11
    I have the same problem I have tried to reflash my sportster 1.75 image using ifa ver 2.3 but some thing is blocking my network I have turned off xp firewall I don't have any av software installed I have disabled everthing in the startup and everything that isn't microsoft services (hide microsoft sevices) in msconfig)here is my log can anyone help:-
    Peebee

    ?debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
    debug: BMon V1.0 mID 01
    debug: feID 7a gtxID 0b
    debug: fpID 5a dsID http://Hallenberg.com
    debug: HWrev X5 SWrev 0.81
    debug: B/Ex/Fl(MB) 32/00/08
    WATCHDOG reset enabled
    debug: autoboot aborted from terminal
    dbox2:root>
    dbox2:root> seteth
    ethaddr 0x1001ffe3
    ethaddr: 00:50:9c:1b:71:0b
    dbox2:root>
    dbox2:root> boot net net net net net net net net net net
    debug:
    BOOTP/TFTP bootstrap loader (v0.3)
    debug:
    debug: Transmitting BOOTP request via broadcast
    debug: Got BOOTP reply from Server IP 192.168.1.10, My IP 192.168.1.202
    debug: Sending TFTP-request for file C/dboxifa_tmp/tftpboot/u-boot
    will verify ELF image, start= 0x800000, size= 140008
    verify sig: 262
    boot net: boot file has no valid signature
    Branching to 0x40000


    U-Boot 1.1.6 (Tuxbox) (Jan 8 2007 - 22:58:00)

    CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
    *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
    Board: DBOX2, Nokia, BMon V1.0
    Watchdog enabled
    I2C: ready
    DRAM: 32 MB
    FLASH: 8 MB
    FB: ready
    LCD: ready
    In: serialŠOut: serialªErr: serialŠNet: SCC ETHERNET
    BOOTP broadcast 1
    Using SCC ETHERNET device
    TFTP from server 192.168.1.10; our IP address is 192.168.1.202
    Filename 'C/dboxifa_tmp/tftpboot/u-boot'.
    Load address: 0x100000
    Loading: *Using SCC ETHERNET device
    TFTP from server 192.168.1.10; our IP address is 192.168.1.202
    Filename 'logo-lcd'.
    Load address: 0x100000
    Loading: *##
    done
    Bytes transferred = 7680 (1e00 hex)
    BOOTP broadcast 1
    Using SCC ETHERNET device
    TFTP from server 192.168.1.10; our IP address is 192.168.1.202
    Filename 'C/dboxifa_tmp/tftpboot/u-boot'.
    Load address: 0x100000
    Loading: *Using SCC ETHERNET device
    TFTP from server 192.168.1.10; our IP address is 192.168.1.202
    Filename 'logo-fb'.
    Load address: 0x100000
    Loading: *####################################
    done
    Bytes transferred = 179877 (2bea5 hex)

    Options:
    1: Console on null
    2: Console on ttyS0
    3: Console on framebuffer
    Select option (1-3), other keys to stop autoboot: 1  0
    Unknown command 'flinfo' - try 'help'
    Using SCC ETHERNET device
    TFTP from server 192.168.1.10; our IP address is 192.168.1.202
    Filename 'kernel-yadd'.
    Load address: 0x100000
    Loading: *#################################################################
    #################################################################
    ##
    done
    Bytes transferred = 675073 (a4d01 hex)
    Unknown command 'protect' - try 'help'
    ##€Booingimae aä %lx Ž..
    Image Name: dbox2
    Image Type: PoWerPcÀLinux KeRnel°ImaÇe (Es)
    à Da$a SIze:mad: d BYtes�= 659.2 kB
    €VerÙfyi®g CˆeckSum Ž.. OK* UncmprÅssižg %C .. OK*debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
    debug: WATCHDOG RESET
    debug: BMon V1.0 mID 01
    debug: feID 7a gtxID 0b
    debug: fpID 5a dsID http://Hallenberg.com
    debug: HWrev X5 SWrev 0.81
    debug: B/Ex/Fl(MB) 32/00/08
    WATCHDOG reset enabled
    debug: autoboot aborted from terminal
    dbox2:root>
    dbox2:root> seteth
    ethaddr 0x1001ffe3
    ethaddr: 00:50:9c:1b:71:0b
    dbox2:root>
    dbox2:root> boot net net net net net net net net net net
    debug:
    BOOTP/TFTP bootstrap loader (v0.3)
    debug:
    debug: Transmitting BOOTP request via broadcast
    debug: Got BOOTP reply from Server IP 192.168.1.10, My IP 192.168.1.202
    debug: Sending TFTP-request for file C/dboxifa_tmp/tftpboot/u-boot
    will verify ELF image, start= 0x800000, size= 140008
    verify sig: 262
    boot net: boot file has no valid signature
    Branching to 0x40000


    U-Boot 1.1.6 (Tuxbox) (Jan 8 2007 - 22:58:00)

    CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
    *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
    Board: DBOX2, Nokia, BMon V1.0
    Watchdog enabled
    I2C: ready
    DRAM: 32 MB
    FLASH: 8 MB
    FB: ready
    LCD: ready
    In: serialŠOut: serialŠErr: serialªNet: SCC ETHERNET
    BOOTP broadcast 1
    Using SCC ETHERNET device
    TFTP from server 192.168.1.10; our IP address is 192.168.1.202
    Filename 'C/dboxifa_tmp/tftpboot/u-boot'.
    Load address: 0x100000
    Loading: *Using SCC ETHERNET device
    TFTP from server 192.168.1.10; our IP address is 192.168.1.202
    Filename 'logo-lcd'.
    Load address: 0x100000
    Loading: *##
    done
    Bytes transferred = 7680 (1e00 hex)
    BOOTP broadcast 1
    Using SCC ETHERNET device
    TFTP from server 192.168.1.10; our IP address is 192.168.1.202
    Filename 'C/dboxifa_tmp/tftpboot/u-boot'.
    Load address: 0x100000
    Loading: *Using SCC ETHERNET device
    TFTP from server 192.168.1.10; our IP address is 192.168.1.202
    Filename 'logo-fb'.
    Load address: 0x100000
    Loading: *####################################
    done
    Bytes transferred = 179877 (2bea5 hex)

    Options:
    1: Console on null
    2: Console on ttyS0
    3: Console on framebuffer
    Select option (1-3), other keys to stop autoboot: 1  0
    Unknown command 'flinfo' - try 'help'
    Using SCC ETHERNET device
    TFTP from server 192.168.1.10; our IP address is 192.168.1.202
    Filename 'kernel-yadd'.
    Load address: 0x100000
    Loading: *#################################################################
    #################################################################
    ##
    done
    Bytes transferred = 675073 (a4d01 hex)
    Unknown command 'protect' - try 'help'
    ##€Booing0imae aä %lx Ž..
    Image Name: dbox2
    Image Type: PoWerPcÀLinux KeRnelðImaÇe (Es)
    À Da$a SIze:mad: Ed BYtes�= 659.2 kB
    €VerÙfyi®g Cˆeckum Ž.. OK* �UncmprÅssižg %C .. OK*debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
    debug: WATCHDOG RESET
    debug: BMon V1.0 mID 01
    debug: feID 7a gtxID 0b
    debug: fpID 5a dsID http://Hallenberg.com
    debug: HWrev X5 SWrev 0.81
    debug: B/Ex/Fl(MB) 32/00/08
    WATCHDOG reset enabled
    debug: autoboot aborted from terminal
    dbox2:root>
    dbox2:root> seteth
    ethaddr 0x1001ffe3
    ethaddr: 00:50:9c:1b:71:0b
    dbox2:root>
    dbox2:root> boot net net net net net net net net net net
    debug:
    BOOTP/TFTP bootstrap loader (v0.3)
    debug:
    debug: Transmitting BOOTP request via broadcast
    debug: Got BOOTP reply from Server IP 192.168.1.10, My IP 192.168.1.202
    debug: Sending TFTP-request for file C/dboxifa_tmp/tftpboot/u-boot
    will verify ELF image, start= 0x800000, size= 140008
    verify sig: 262
    boot net: boot file has no valid signature
    Branching to 0x40000


    U-Boot 1.1.6 (Tuxbox) (Jan 8 2007 - 22:58:00)

    CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
    *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
    Board: DBOX2, Nokia, BMon V1.0
    Watchdog enabled
    I2C: ready
    DRAM: 32 MB
    FLASH: 8 MB
    FB: ready
    LCD: ready
    In: serialŠOut: serialŠErr: serial
    Net: SCC ETHERNET
    BOOTP broadcast 1
    Using SCC ETHERNET device
    TFTP from server 192.168.1.10; our IP address is 192.168.1.202
    Filename 'C/dboxifa_tmp/tftpboot/u-boot'.
    Load address: 0x100000
    Loading: *Using SCC ETHERNET device
    TFTP from server 192.168.1.10; our IP address is 192.168.1.202
    Filename 'logo-lcd'.
    Load address: 0x100000
    Loading: *##
    done
    Bytes transferred = 7680 (1e00 hex)
    BOOTP broadcast 1
    Using SCC ETHERNET device
    TFTP from server 192.168.1.10; our IP address is 192.168.1.202
    Filename 'C/dboxifa_tmp/tftpboot/u-boot'.
    Load address: 0x100000
    Loading: *Using SCC ETHERNET device
    TFTP from server 192.168.1.10; our IP address is 192.168.1.202
    Filename 'logo-fb'.
    Load address: 0x100000
    Loading: *####################################
    done
    Bytes transferred = 179877 (2bea5 hex)

    Options:
    1: Console on null
    2: Console on ttyS0
    3: Console on framebuffer
    Select option (1-3), other keys to stop autoboot: 1  0
    Unknown command 'flinfo' - try 'help'
    Using SCC ETHERNET device
    TFTP from server 192.168.1.10; our IP address is 192.168.1.202
    Filename 'kernel-yadd'.
    Load address: 0x100000
    Loading: *#################################################################
    #################################################################
    ##
    done
    Bytes transferred = 675073 (a4d01 hex)
    Unknown command 'protect' - try 'help'
    ##€Booingimae aä %(lx Ž..
    Image Name: dbox2
    Image Type: PoWerPcÀLinux Kenel°ImaÇe (Es)
    À Da$a Size:À d BYtes�= 659.2 kB
    €VerÙfyi®g Cˆeckum Ž.. OK* �UncmprÅssižg %C .. OK*
    ------ Extra Informations ------
    Selected Network adapter: U.S. Robotics 10/100/1000 PCI NIC - Packet Scheduler Miniport (0)
    IP-Adress of the Network Adapter: 192.168.1.10
    IP-Adress of the Dbox: 192.168.1.202
    Comport: Communications Port (COM1)
    Operatingsystem: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    CPU 1: AMD Athlon(tm) 64 Processor 3700+ @ 2250 MHz
    Filename of the Images: TX_UK.img
    Imagetype: Two Flashs
    DBOX-IFA Version: 2.3
    ------ Powered by http://www.dboxservice-hallenberg.de ------
     
    peebee05, Sep 28, 2007
    #41
  2. mgb17

    mgb17 Regular member

    Joined:
    Jan 29, 2007
    Messages:
    1,938
    Likes Received:
    0
    Trophy Points:
    46
    You could try IFA version 1.5.6 .
     
    mgb17, Sep 28, 2007
    #42
  3. peebee05

    peebee05 Member

    Joined:
    Nov 21, 2006
    Messages:
    12
    Likes Received:
    0
    Trophy Points:
    11
    tried that no success
     
    peebee05, Sep 28, 2007
    #43
  4. mgb17

    mgb17 Regular member

    Joined:
    Jan 29, 2007
    Messages:
    1,938
    Likes Received:
    0
    Trophy Points:
    46
    Before you plug in press the up arrow button at the box and let it pressed.
    If you see something at the display after plugin you can release the button.
    After that you see the result of a memory test in the log output.
     
    Last edited: Sep 28, 2007
    mgb17, Sep 28, 2007
    #44
  5. peebee05

    peebee05 Member

    Joined:
    Nov 21, 2006
    Messages:
    12
    Likes Received:
    0
    Trophy Points:
    11
    What does this tell me?
    Press the up arrow and hold in untill powered up do you mean?
    what do I look for on the display?
     
    peebee05, Sep 28, 2007
    #45
  6. mgb17

    mgb17 Regular member

    Joined:
    Jan 29, 2007
    Messages:
    1,938
    Likes Received:
    0
    Trophy Points:
    46
    If you get the message from IFA to power on the box click ok and press the up arrow button at the box and plug in with pressed button.
    After that check the log output.


     
    mgb17, Sep 28, 2007
    #46
Page 3 of 3

Share This Page