KRYPTVIEW A750

fergus or anybody that can help im havin a problem just tryin to download data but stb editor keeps sayin........................... cant open serial port 1 please check if comport has the following parameters bourdrate:115200bps, parity : no parity, data byte :8 data/data, stop bit: 1..... if sombody could explain where im goin wrong.... or how many things im doin wrong,???? i would be really greatfull for your help.....!

 

make sure you have the right number on the loader as your comport is assigned to check this

also make sure your box is switched off at the back before you press the download button then switch on

 

On your PC, do the following.

START

Right click MY Computer

Choose MANAGE from the list

Click on DEVICE MANAGER (in the lefthand pane)

Click on the little plus sign beside "Ports (COM & LPT) in the righthand pane

Right click "Communications Port (COM1) & choose PROPERTIES

Click on the "Port Settings" TAB

Set the port settings as follows,




-

 

wrong settings has to be 115200

 

It will work on either ferg.

It's just a slightly slower transfer rate (less chance of corruption)

-

 

might be to slow on that the correct one is 115200

 

Makes no difference, both work fine.

-

 

ok mate no prob

 

Anything strange your end ferg?

Quite enough here lately...

-

 

quiet with all the starviews etc all gone now only 1 box left so not much competition any more so less work

 

Hi ferg,, A friend of mine has a KV and he said all of his sports and movies were gone, so i hooked it up to my cable, and the box is fine, what do u think is going wrong, he only lives a mile away.

 

try doing a new scan on his cable with no splitters on the cable

 

A friend of mine just phoned me,downloaded firmware for kryptview in dublin,and box wont work in ashbourne?he,s living in appartment block and is on cho--s.is it just amatter of factory reset and rescan,or is it something else,im posting this now but wont be back till tomorrow,thanks in advance.

 

Is it possible he is on MMDS in the apartment block or just plain cable get him to do a factory default and a new scan if that dont work use the freq from his old box and input them into the box

 

some appartment blocks were subbed out to different provider can u double check even a bill for info.has he had another box that worked.

 

do kv work on chorus ???

 

yes as long as its not MMDS it will work no problem some areas do need to be manually input of the freq

 

how u no if ?
mmds