As far as i know he is on n** but could be wrong and digital dont go outside of the bray area he would need to make sure he is on digital get them to check the Bill
does he have a box from the provider ?? otherwise he is going to have problems as he wont find the freq
Fergus and all the guys i want to say big thanks for getting kryptview working brilliant job, i hadn't clue but with time a lot of patients and the help from fergus a job well done.... keep the fantastic job up..! and thanks alot.
all the thanks goes to the makers of the firmware for the boxes without them we would all be in a tissy
i have the same problem with sorting my channels,moved them to my preffered order but the next morning they were back to where i started.checked the settings and the power search mode was switched on,anyone any ideas?
all you channels are in order if you look press the ok button then the green button all the channels are catagorised for you movies / sports / music / kids all in order
fergus would you please pm me the frequenciesfor the kv mmds as i am missing some channels i.e s*y spt 2 etc. thanks in advance
just downloaded firmware for arnet[download successful]when i go to tv and scan for channells,the box display goes to half a zero and tv picture break,s down to many coloured pixel,s.Ihave did this procedure many times for friends and it has allways worked,is the problem with the box?.im on nthell
get the freq from your other box and use them if you rescan your old box they will all come back in you just wont be able to watch then get the freq
just to update,ive opened box,can see no problem,tried different tv,tried different scarts,have since managed to recieve all channels since first post.but after watching tv for about 3 mins the screen goes green or white.when i switch button of and then on at back of box the display showes nothing at all.i have to wait for about 3 or 4 mins before i get the station back on,then it just repeats it self all over again.it sounds as if it,s a heat issue but the box is cold and well vented?
ok take the connectors off the box bot of them going to the main board and reseat them again and see what happens you are using a full 21 pin both ends scart and its in the correct slot the first one nearest the cable input