KRYPTVIEW A750

NO mate not in mute mode lol just a prob with the box im sendin it back

 

Hi all,
I have ordered a Kryptview and have been informed that it will arrive this Thursday. I have had a Eurovox for the last 18 months. The installation for the Eurovox was very simple - just a matter of hooking the box up and doing a scan if I remember correctly. I didn't require the null modem cable until I updated the firmware. I was wondering is it much the same procedure with the Kryptview? When I look at FergusB's directions at the start of the thread I wondered is it necessary to use the null modem cable in the setup of the Kryptview? Sorry to sound naive but any help would be much appreciated.

 

It will be sent with fta firmware only so will need to be flashed.

 

hi karljd i need your help if possible i am in the munster area where the eurovox max v still works ,my problem is that my max v is looking for code to be updated allthough the houses around me are all working fine i had updated theres aswell as my own with the latest firmware and all working fine till today any idea what could be wrong i have put in the c**des manually and re scanned the box again and still looks for the code any help would be appricated

 

Try a factory reset and a rescan,ps should have posted in a eurovox thread.

 

thanks Karljd sorry bout that,1 more question is the kryptview the only box that is able to cope with nagrs 3 at the moment

 

no cable box is able for N3 as of yet, the kryptview works on N2, no ones knows how N3 will pan out

 

Ta MICKAH sorry for the lack of knowledge but why are people buying the kryptview is it able to work even when the cable guys have updated their side

 

firmware has been fixed to work on N2, but N3 will be the challange, and the Kryptview team were first and foremost with their updates and support last time, as if any box will work with N3, anyones guess at this stage, but enjoy your box while its working and worry about n3 when it happens

 

Hello Guys!
Have gone through many threads in this forum, trying to get kryptview A750 up and unning. Have been able to upload new firmware on the box(Got the success message), Looks like flashing did happen and Box re-boot itself. However, currently the box is showing 0000 on the console. Its connected via scart cable to TV, and there is no signal either.
Its connected to Virgin Cable into RF in port. The virgin box works just fine.


Any suggestions what next i could try!

Much Appreciated.

 

?

 

Thanks Karl. Is the flash procedure for the Kryptview the same as it is for the Eurovox as per Eamo's library? I haven't been able to find a copy of Kryptview flashing procedure. Apologies for being a pain but my Kryptview arrived this morning and I am hoping to have it up and running before nightfall.

Cheers Mick.

 

Thanks for the reply. Been away for a few days and decided to give it another go.

This is what i'm doing...

Easy Installation
Automatic Searck - ok
network .nthell ok
channel search type - network-ok

You say that after this I will get to choose an area,and to choose legacy channels. It's not giving me the option. What happens next is ...

New Screen- Network scan
add tp list - they all say already exists
Searched 7/7 and tells me its complete so i exit and it takes me straight back to the eeasy installation screen!

What am I doing wrong. Going round in circles here! Cheers.

By the way, Im in Dublin 6 area

 

Have ya tried flicking the chans forward?

 

Have a look in HERE mick

 

Cheers Karl. Downloaded firmware successfully or at least that's what it said on the screen. I am now trying to scan but getting a lot of grief. I have followed FergusB's sequence for scanning but each time I click on yellow button to accept scan on different frequency I get the response 'FAILED'. Would you (or anyone) be able to enlighten me on this as I have spent over an hour now and I'm no further ahead. Cheers Mick.

 

nobby3ie
The results you describe can be caused by no signal being connected.

Always connect the cable directly to the KV with NO splitters etc.

There are 7 TPs in the KV by default and if there is no cable connected the KV cannot read the required TPs for your service provider and then go on to store and scan those TPs.

It will count through the default 7 and report them "already exist"
These default TPs refer to frequencies outside the range used here and when scanned will find no channels.

I have also had a KV which had a faulty tuner and showed the same symptoms. I used to live in D6.

 

Hi all
Got my KV 750 today and have been trying to flash. Got as valid null mode cable and tested with my Euro Max V2008 and Ok.

When I run the loader and select download and open the correct BIN file Kryptview_19032009.bin then clicked on Start. After 5 seconds it comes back with a dialogue box titled STB Editor and message "The downloading is not requested". The Download box shows "Read REQ fail"

Dub South, NTHell, have done factory reset, power off/on/standby and all othe rcombinations. When I do a scan it does find the stations but all stay coded - formware showing December 2008.

Please help