KRYPTVIEW / STARVIEW / EUROVOX / DIGIVOX

hi im not too shure what to do
i can get the Digivox XL USB now or wait two weeks at least for the KryptView Evolution A750 as where i orderd them they were sold out off KryptView im in galway ntl

 

wait for the kryptview as if the XL goes breasts up like the other boxs did, how long will you be sitting waiting on an update.....

 

Hi everyone, I've just received my KV 750. I have the loader and file but is tehre an idiots step by step guide to setting up the box?
Thanks in advance

 

have a look here, already covered

http://forums.afterdawn.com/thread_view.cfm/763417

 

have the mates K/V here with me as we speak,all stations perfect but no sound,my K/V works fine on my leads,but when i connect up his box still no sound?ive tryed factory default and rescan,still same.if i flash the box again will this work?on nthell in dublin.any advice would be helpfull.

 

Thanks MICKAH

 

Np mate,

@reswob,

is the scarts pushed in all the way on both the box and TV? Is the box on mute? Is the sound lowered right down?

 

checked all,everything seems ok,no splitterseither micka

 

mickah,ive checked everything,would reflashing the box help,this problem only started last night?

 

factory reset and rescan and see if it helps
SCANNING FOR CHANNELS.

Go to AUTOMATIC SCAN and choose your provider.
Choose NETWORK SCAN
Wait until a list of network ID's come on screen and choose the one for your area (DUB LEGACY)
Once your chosen ID is highlighted press the GREEN button, the box will start to scan for transponders. Do not worry if this takes some time and appears to be doing nothing.
The box will start to scan all transponders, don't worry if it says that some already exist.
Once the TP scan is completed the box will scan for available channels.
When the channel scan is finished the box will reboot.
Pick a scrambled channel and wait to clear, it it takes a long time switch off at mains and on again, sometimes the emu doesn't kick in straight away ;D
When channels are clear, pressing the RED button brings up a list of category choices. Green will bring up the pre-sorted categories.
If you renumber any channels to a personal preference then switch OFF powerscan mode otherwise it will re-scan them into their original positions.

 

Ok first tim poster long time follower. Can anyone tell me wat I need to get free channels back again. Im in Galway city. I had one of the starview boxes dunno which one but got it bout two years ago. all help appreciated.

 

sorry mickah i did all that twice all ready still no joy,i even turned power of for 20 mins and still the same?this one has me baffled!

 

sounds like something is gone on it, could be a board issue perhaps, if ya done the above and checked yer leads etc, one thing to try is hit the audio button and see what its on,

Is it a new box?

 

have a look at the Starview thread, covered already, no fix for the older starviews, just the USB model, no fixs will be done for them

 

Ok cheers mate so whats the recommendations the kryptview is it? are the attainable in the glaway region.

 

bli=eng stero

 

should of said 3 months old

 

have ya tried using audio cables out of the box? RED, WHITE and YELLOW and connect it to a home cinema or a TV, just to see if its the scart connection is working.

If you do the above and no sounds comes out, I would contact yer supplier, sounds like a prob with the board if ya done all the above,

 

Google TMC or SKYWONDER, but like hens teeth at the minute

 

dont have those cables,will get them later and try that.will reflashing do any good?thanks for all your help mickah.