KRYPTVIEW / STARVIEW / EUROVOX / DIGIVOX

ya said you factory reset already above?? If you factory reset and re-scanned and still the same issue, sounds like a problem. Try the other cables and see if sound is coming from the box, if not, then I would contact the supplier

 

cheers mickah,will try that later,will let you know how i got on.thanks again

 

Hi MICKAH

I got all the bits in place for my KV A750 - Null Modem Cable, COM1 -and ran the DownTool exe and selected to download 19032009.bin but it comes back with "Download not requested". The instructions on th signature of teh thread you pointed me to are gone. Can you advise of procedure please.
Thanks

Marcas

 

Did you unpack or unrar the file?

It has to be a BIN file that you are loading to the box, not exe or rar or zip, if you unpack the file using WINRAR or 7-zip and put it on the desktop, start the loader and select the BIN file for the box and press download and then follow this

Go to AUTOMATIC SCAN and choose your provider.
Choose NETWORK SCAN
Wait until a list of network ID's come on screen and choose the one for your area in Dublin its(DUB LEGACY)
Once your chosen ID is highlighted press the GREEN button, the box will start to scan for transponders. Do not worry if this takes some time and appears to be doing nothing.
The box will start to scan all transponders, don't worry if it says that some already exist.
Once the TP scan is completed the box will scan for available channels.
When the channel scan is finished the box will reboot.
Pick a scrambled channel and wait to clear, it it takes a long time switch off at mains and on again, sometimes the emu doesn't kick in straight away ;D
When channels are clear, pressing the RED button brings up a list of category choices. Green will bring up the pre-sorted categories.
If you renumber any channels to a personal preference then switch OFF powerscan mode otherwise it will re-scan them into their original positions.

 

Hi MICKAH

I downloaded the DownTool.exe and the BIN file (they were not packed) and I ran the exe and got a screen with and selected Download - It defaulted to Code Send (is this right? other options on teh menu bar are Code Si Loader K-Table)

I opened Kryptview_19032009.bin then clicked on Start. After 5 seconds it comes back with a dialogue box titled STB Editor and message "The downloading is not requested". The Download box shows "Read REQ fail"

I've selected FTA Model and COM1.


Apologies if I'm being thick!

 

MICHAH

Forgot to say Download Tool is DownLoad_0927.exe and am in Dublin Southside N*L

 

Did you unpack or unrar the file?

It has to be a BIN file that you are loading to the box, not exe or rar or zip, if you unpack the file using WINRAR or 7-zip and put it on the desktop, start the loader and select the BIN file for the box and press download and then follow this

Go to AUTOMATIC SCAN and choose your provider.
Choose NETWORK SCAN
Wait until a list of network ID's come on screen and choose the one for your area in Dublin its(DUB LEGACY)
Once your chosen ID is highlighted press the GREEN button, the box will start to scan for transponders. Do not worry if this takes some time and appears to be doing nothing.
The box will start to scan all transponders, don't worry if it says that some already exist.
Once the TP scan is completed the box will scan for available channels.
When the channel scan is finished the box will reboot.
Pick a scrambled channel and wait to clear, it it takes a long time switch off at mains and on again, sometimes the emu doesn't kick in straight away ;D
When channels are clear, pressing the RED button brings up a list of category choices. Green will bring up the pre-sorted categories.
If you renumber any channels to a personal preference then switch OFF powerscan mode otherwise it will re-scan them into their original positions.

 

Hi MICKAH

It is the BIN file. I am running the DownTool_0927.exe on my laptop - I then select "Download" and click open and select the Kryptview19032009.BIN file and click Start that's when it fails. When you say "start the loader" I assume you mean DownTool_0927.exe or am I missing something?

 

ahhh, you running vista? you may need to look at your drivers or port settings, you using a null modum adapter? you may need to look here

http://www.gilsson.com/usb_drivers_download.htm

and here

http://forums.afterdawn.com/thread_view.cfm/779888

or flash it on a PC with XP

 

No using XP Sp2, COM1 and teh Null Modem Cable that came with the box.

 

Sorry MICKAH - just read the thread from HiTeck and didn't realise I had to switch the box off to download - I'll go through step by step again and let you know.

Thanks for all the help!

 

Help!!!

I've followed HiTeck guide but still get a fail on trying to flash the KV - turned it off selected the righ BIN file but s=t "The downloading is not requested"

Getting desperate!

 

sorry mickah i just tought i through my 2cent in aswell to try an help this chap
turn of your box and leave your null cable in it and laptop or pc connected to it
when you turned of the box at the on of button at back of box, then press d.load on the download-tool and turn your box on straight after pressing download, you might have to do this 1 or 2 times to get timing right also make sure you have the right software (19032009) as mickah said, then just follow the rest of his instructions and you should be up and running,(take your time when doing it)so you make no mistakes.

 

just look at how happy we made this lady by helping turn her box on.

 

Thanks Hooter, teh power trick worked a treat first thing this morning.
I did a full scan and got all channels, however they are breaking up every few seconds, whereas my MaxV (or what was left of it) was Ok on reception. Maybe the storm last night knocked out some transmitters or is there a tweak I can do.
Dublin 14, NTHell.

Again thanks to you, HiTeck, MICKAH etc....

 

ah good stuff so, up and running!!

 

Hi can anybody advise me where i can get my hands on a kryptview evo 750?

 

Marto - I'm Dublin also - got mine from Skywonder in the UK, £110 including DHL express shipping and good tracking info.

 

i tried those cables as you suggested mickah,still no sound?looks like this one going back to supplier,thanks again for all your help MICKAH.