KRYPTVIEW / STARVIEW / EUROVOX / DIGIVOX

Hi -
I was reading through the many threads on the kv update flash from 12/7/09. not seen any answers to my query - so here goes.

I have had one of these kv boxes a while (april) - successfully did the 19/3/09 update - from new installation. all works perfectly.

couple of quick questions:
1. the latest update from 12/7/09 - is it actually worth doing?
2. on the instructions (downloaded from 4shared) it states how to do to flash kv - but its seems that its from a brand new box - rather than an update box point of view. does that make sense.

Do you have to factory reset the box before you can update?
I mean - how do you get the 4 green 0000 on the display otherwise?
I've tried following the instructions - but it simply won't play ball - the only thing i can see that is different is the display at the start - i have 4 ---- rather than 4 0000

Any ideas?
Cheers

 

couple of quick questions:
1. the latest update from 12/7/09 - is it actually worth doing? - if your box needs it, slow remote etc, if not, then no.

2. on the instructions (downloaded from 4shared) it states how to do to flash kv - but its seems that its from a brand new box - rather than an update box point of view. does that make sense - Easiest way is connect the box to the cable, make sure the box is turned off, start the loader and select the BIN file, press download, count to 3, flick the switch on the back of the box to on and off it will go

Do you have to factory reset the box before you can update?
I mean - how do you get the 4 green 0000 on the display otherwise?
I've tried following the instructions - but it simply won't play ball - the only thing i can see that is different is the display at the start - i have 4 ---- rather than 4 0000 - have you tried connecting the box and rescanning?

 

After you put the new update on it, the box will revert back to new state, ie no channels on it.

 

can anyone help me with a digvox xl downloan firmware tips

 

Are you in the Uk or Ireland ??

if ireland and you are on N$$ it wont work here

if in Uk you need to put V1341 on it with the downloader 10

 

here is the video for flashing the firmware and the loader all below

Flashing Video

Firmware

Loader

 

Hi im plain to buy 10 boxes from wizard sat
Is their a shippin cost to dublin ? And if their is how much ??

How long dose it take to ship over ??

 

I already told you contact them directly, dont start multiposting the same thing

 

----------------------------------------------------------------couple of quick questions:
1. the latest update from 12/7/09 - is it actually worth doing? - if your box needs it, slow remote etc, if not, then no.

2. on the instructions (downloaded from 4shared) it states how to do to flash kv - but its seems that its from a brand new box - rather than an update box point of view. does that make sense - Easiest way is connect the box to the cable, make sure the box is turned off, start the loader and select the BIN file, press download, count to 3, flick the switch on the back of the box to on and off it will go

Do you have to factory reset the box before you can update?
I mean - how do you get the 4 green 0000 on the display otherwise?
I've tried following the instructions - but it simply won't play ball - the only thing i can see that is different is the display at the start - i have 4 ---- rather than 4 0000 - have you tried connecting the box and rescanning?
---------------------------------------------------------

Thanks Micha.
tried that thanks - but just get a pause - then download wasn't started and back to beginning. Not sure what is going on.

So you don't have to do a factory reset or anything first (i haven't). I am starting from the point where the box is working lovely - all channels etc - just want to update the firmware.

Luckily - the remote is working pretty much ok - so i'll just hang on that and leave it me thinks.

FYI - In dub coorrusss area - but that shouldn't matter. Flashed the kv first time round in minutes, not a bother.

Thanks again

 

sorry one other thing.
If another new update comes out for KV (for example today) - would you need to load 12/7/09 first, then the next one - or can you just jump to the latest?
If so - then i may prevail with the 12/7/9 version - just so i am sorted for the next update as and when / if it comes

 

Hi again
I thought what the heck I'll have another go - set it all up as before, waiting 3 seconds on the switch - and hey presto - away it went.

All updated and sorted. Very odd it didn't work before - i didn't do anything different (apart from the 3 second rule). Didnt' work this morning - but all good now.

It has made sod all difference to the remote that i can tell - so maybe i have one as good as it gets.
Thanks for the help all the same - time appreciated.
cheers

 

np mate glad its working,

you can flash any firmware regardless of the date, it will overwrite the existing one

 

got my kyrptview working great so far,thanks to mickah for step by step guide for setting it up and all those who help me choose kryptview im very happy with it.one question can i get two tv,s off the one kryptview with a two way splitter it so which is the best splitter to get.thanks

 

its thanks to Hi Teck for the guide...

you can split the cable before it goes into the box and run it to another TV, but, if you are looking to watch the same chan, you need a video sender or another box for the other room

 

Why after doing an auto scan on my Kyrptview box it wont
pick up the new ESPN uk channel im in Ireland please help
im a UFC fanatic and cracking up as 101 is on this Saturday
please help!!!!!

 

im not sure about espn uk but ive got espn america, are you sure we get espn uk?

 

I know im slow on the uptake here and loads of people have asked befroe but can any1 send me on a good place to get a Kyrptview delivered to Dublin ? , I want to get one before the football starts ove the next few weeks


Thanks

 

mate dont multipost I answered you in the the thread you created

and no , we dont have ESPN UK in Ireland yet, if ya need to see UFC go to myp2p.eu and you will get it live there via a stream

 

As far as i know final signature is required, until that it wont be seen, so patients is all that is needed.

 

There is none available at the moment but here is a reputable company below

Kryptview Supplier