kryptView Updating & Scanning Tutorial

you cant change the baud rate if your pc dont see the port you need the usb plugged in to see it but as yours dont reconise the adapter you are stuck

i suggest you try and find a driver for it or get a old pc or laptop with xp and a comport on it and flash the box that way

 

Try installing the Prolific driver found here (select the Vista compatible one)

 

thx for the quick reply..downloaded the prolifice driver..and finally got it changed to required com1 and baudrate...
Now getting one more problem while downloading the file it give the message as "NO dowloading Requested" i am using file Kryptview_A780_03012011...do i have to use old version...

thx for the quick reply..downloaded the prolifice driver..and finally got it changed to required com1 and baudrate...
Now getting one more problem while downloading the file it gives the message as "NO dowloading Requested" i am using file Kryptview_A780_03012011...do i have to use old version...
thx

 

thx for the reply i have done tht...now i have posted a new prb if u can suggest a solution for tht...thx

 

ok switch the box off at the back press start on downloader then switch box back on at the back job done

 

Also ensure you set the COM port number on the downloader the same as you set in device manager before you press start.

 

done tht few times now...on two diff laptops one wid windows 7 and vista... same message "Downloading not Requested".. any more suggestion

THX

 

here m8 have a look at this video

http://www.youtube.com/watch?v=Q2RbdhH7_b4&feature=related

 

hi i got my box today it was already flashed when i got it. i done the factory default and then the scan and i got all the channels apart from the movie channels. well i say all movie but i do get one. am i missing something??? its got the latest update ive checked.

regards craig

 

have you selected the correct net Id on set up? have a read of the tut in E45's sig, follow it to the letter

 

ok, its the correct one as per the sub box, make sure all cables are correct, your signal level is good, about 80%, leave the box on standby and let it powerscan for about 30 to 40 mins, I do know that some of the movies on the krypt are missing lately, but do the above and see if that pulls them in

 

Lucky man to get a KV box. They will be like gold-dust.
Have seen post elsewhere with movie channels down, so may be temp server or Prov problem
Check Provider name & NET-ID in Provider box menu & use these when scanning.
It may help to remove LAN-cable from box when scanning.
Make sure POWER-SCAN MODE is turned ON in KV A780 menu
Put box in stand-by overnight & it will search for any missing channels
If not sure of correct NET-ID, ask supplier who flashed box, he should know

 

i didnt find it hard to get one to be honest. their on now i put it in standby mode but then read about the automatic searching so went to check that was turned on and there they were. thanks for all the help

regards craig

 

Good man, it's easier when people do what's suggested.
If ever doing auto-scan fac-reset first then full list of ID's will show

 

good stuff brum, glad yer up and running

 

Hello guys been tryin to flash my new kv a780 for 2 days.. Tried on windows 7 and on vista..still comes Wid d msg download nt requesting.have followd d instruction and even saw d Vedio on u tube...nw goin to mates house..he's got old pc Wid xp.. Only question do I need a driver for d box or will it detect strait away wen I connect by port..thx

 

make sure he has a comport on his pc then you wont need adapter

 

Thx for d reply..He has comport on pc..so I'll jus rs232..my question was wud it need any kinda driver to locate d box..or is it plug n play kinda thing...

 

Its plug and play mate, plug in before you switch the computer on (no driver required to install, it is installed on your friends computers firmware).