kryptView Updating & Scanning Tutorial

no m8 get all the info you need from my signature below and follow that

 

Thx gona try it nw..and give u guys update.. Cheers..

 

No joy.. For kv 780.. Tried to flash on like 6 diff pc's Wid diff windows on it followd d instruction to word.. Same dam msg..Downloading not requested'..shall I ask d seller to replace it.. Will he do it though??..

 

you have got to switch it on and off as u begin flashin try that

 

If you are using a 9pin male serial port (and not USB adapter\USB port)on the computer to connect to, then as long as you are following the procedure it should be no problem at all.
It should be a matter of connecting the NULL modem cable up, rebooting the PC,open loader up and select the firmware file, switching off the Kryptview with switch at the back. pressing START,and quickly switching the Kryptview back on with switch at the back.

Are you sure you are using a NULL Modem cable, and not a normal RS232 cable ( they are identical to look at).

 

Double post, see above.

 

I m using d cable which was sent Wid d box... Doesnt say on d cable aswell.. Well I'll have to buy a rs232 null model cable..and will flash Wid tht..I bot from digital delight...

 

If it was sent with the box, then it will be the right cable so do not buy another one.

The firmware and downtool you need are here.

You should be able to just follow the process I have just posted above (leaving the default COM1 setting in the downtool). I cant help thinking the box is OK, and we are doing something silly wrong. I will have a think and let you know if I think of something jabal07.

 

read the tutorials under my signature everything you need is there including the latest files just make sure you are putting the correct file on your box the A780 one as both have the same date and very easy mixed up

 

Thx for d reply jodav and e45.. I have tried ol d possible way.. It mite b I m doing some silly mistake..have followed ur tutorial to d point.. And it's d correct file..I have brot d box to someone who has got more experience wid computers.. If he fails I'll have to get it exchanged frm seller..

 

OK buddy, let us know how you get on, and good luck.

 

The amount of sv7 going on eBay £50 new there's gonna be some sick buyers who probably dnt no anything at all

 

Finally... It is working exactly after a week..tried 7 diff computes 4 diff O S... And it wasn't d box which was playin up... It was d cable.. Seller sent us d wrong cable..as we spoke to seller aswell he said it was d wrong batch.... And it took few days figure it out Wid d help of Oder computer guy...in short box is ol gud.. Done d set up and getin ol d channels...
Have to say big thank you to you guys..e45 and jodav.. and all Oders who tried to help...
Cheers

 

I am over the moon you got it working jabal07, well done mate.

And big thanks for taking the time to update us all.

 

just got one of these boxes for my mum, she is getting virgin broadband installed soon, she is not subscribing to cable tv, also she is not really bothered about going on the internet, so would the cable signal be strong enough to receive channels on kryptview if she doesnt use a laptop on the internet?, thanks

 

The box must be connected to your cable feed and the net via ethernet to your router 24/7 otherwise you will not be able to view channels

 

well if she aint paying a sub for tv, the signal will be lower and will cause probs with it, if you get a basic sub from them then the signal will be at the correct levels, if you split the BBand for TV, expect probs

 

I avent no subs just tinternet mines split off also and works fine.

 

good stuff, but it dont always work out like that for everyone, a lot of folks have issues with signal levels as they dont have enough signal to run the box correctly when they pay for bband only and split the cables, so you can take a chance it will work, but there is a good chance it wont, depends on the area,the signal to your house, your cabling (if its bad, it reduces the signal) etc, so if you get a box and have issues with the picture etc, if the signal is low, dont be surprised with the end result,

 

thanks everyone for your help, I will let you know the outcome