Latest Digivox & Digivox XL Firmware

when it says run or save press save and save it somewhere you'll remember. go there and open the downloader10 file and select the bin you want to write to the box. if the file is .zip you need to extract the files. if your computers newer you can right click on the file and press extract here. than you browse in downloader10 to the bin file and select it.

 

Hey Daylitex. Many thanks for your response. Is there a new secret code? i.e. when I highlighted 'systems info' and inputted '1004' - nothing happening so I could not access secret menu to enable me to switch 'emu' to 'on'. Any help would be much appreciated.

Forever grateful.

elsie 123 X

 

Hey Daytilix

Since Last post I have got EMU On. I rescanned all channels. All appeared, however most are still scrambled. Is there anything else I can do. Version 4200 is now installed. Is there a channel I should go to and wait... In the meantime, I am going through them one by one. PS I am in Dublin area, does this make a difference?

Forever grateful.

Elsie 123 X

 

Hi Elsie
strange it has not worked for you, if you go here you will find codes
try manually putting in the codes for your SP in for your area, I use a digivox and s/v box and the codes are the same. *link to codes removed*
good luck x

 

Daytilix please remove the link to the co*es as its not allowed!!

 

Hey Daytlilex

Thanks a mill. Will try same. Sorry if I got you a b*lliciking for same. your help is much appreciated.

Thanks again.

Elsie 123 X

 

in irl the v4200 has problems updating,i tried it and dont like it and gone back to manual input for the time being,whereas the xl for black box does the business,would like to see the numbers changed on silver box as who is going to remember all those high numbers lol.
as these fixes were for uk problem .if u flash ur box with firmware and it does not update and u enter manual data u may stop box from updating alltogether.it needs to update itself.

 

Hey Cactikid, thanks a mill for input. What do you suggest for silver digivox in Irl? Ver 4200 now installed. Should I revert to 2800 and manually input C*d*s?. Thanks again for all your help.

Elsie 123 X

 

v2.800 will be seek and enter when they roll,as u have v4.200 on it just find a channel that it will update on and when new one comes u can redo with new firmware.

 

Than,s a mill Cactikid. Noted. Will do.

Forever grateful.


Elsie 123 X

 

thanks to all who helped with the problem with my digivox xl including steo2k8 and des b does anybody know if there is a similar device as the boxes for receiving the internet?thanks in advance

 

hi guys im stumped on this 1 i have 2black an silver digivox both flashed wit 4200 1 box is fine but the other1 wont respond to the remote wen i switch it on the display goes through the motions ie (boot,f-oo etc) then it sticks with on displayed and no output to tv ?????.ive tried bad flash method no joy put 400 back on put 4200 back on still same result any advice greatly accepted

 

only 3 come to mind pc,laptop.and mobile fone

 

was a factory reset done on box as after flash on will come on.scart connections ok?are u getting menu on screen no?vcr and tv scarts in correct position?ur doing the silver digivox not the black xl are u?
or bad flash.

 

no not the xl wen i turn on the box the display says (boot,f-oo etc)
and stops wen it reaches on then nothing happens, the other box wen it reaches that point it counts up an then goes to the last station it was on no prob.

 

sorry cactikid yes all connections ok as i have 2 boxes side by side
1 is aok the other 1 no out put to tv so i cant even see a menu to do afactory reset it has me head warped

 

if u put scart in vcr socket can u view thru vcr,or try using red/white/yellow video to see if u get picture.if nothing reflash with a previous firmware to check.

 

sorted i connected to tv wit video leads got menu on done fact reset now it picks up scart all ok thanks for all ur help
happy days are here again whoopee

 

Please can someone help me a dont know whether am doin something so simple wrong its unbelievable...i follwed the instructions you have all been kind enough to display but after turning my silver digibox and pc back on i go into downloader 10..app..com1..browse..enter the bin file suggested then click download, but the progress bar never moves and the comes up flash failed try again?? has this happened to anyone else can anyone help me please would be much appreciated.

Thanks

 

Hi wen i press download on loader the progress bar doesnt move, does anyone know wats wrong??

I hope someone can help, am i unzipping the file wrong?, is it downloader?

Plz plz plz