1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

LG GSA-4166b Drive Problems...NEED HELP

Discussion in 'DVD / Blu-ray drives' started by JustanA, Jun 6, 2007.

  1. JustanA

    JustanA Guest

    I have two drives configured as Master/Slave on the second IDE channel...LG GSA-4166b(master) and a Toshiba SD-M1502(Slave) I use as reader. I've used the same drives in the same config for months and burned an untold amount of discs. The other day, I started to get errors on the burn end of the process over and over again. Since then I have formatted my HD and tried another drive (Plextor PX-716a)getting the same results. Using "ImgBurn", this is the error and the log I get every time...

    I/O ERROR!

    Device: [0:0:0] HL-DT-ST DVDRRW GSA-4166B 1.02 (F:)(ATA)

    ScsiStatus: 0x02
    Interpretation: Check Condition

    CDB: 2A 00 00 00 00 00 00 00 20 00
    Interpretation: Write (10)- Sectors:0-31

    Sense Area: 70 00 03 00 00 00 00 0E 00 00 00 00 0C 80 00 00 00 00
    Interpretation: Unknown (Write Error)(0x0C, 0x80)

    Log:
    W 01:56:03 Retry Failed - Invalid Address For Write
    W 01:56:03 Retrying (11 of 20)...
    W 01:56:03 Retry Failed - Invalid Address For Write
    W 01:56:03 Retrying (12 of 20)...
    W 01:56:03 Retry Failed - Invalid Address For Write
    W 01:56:03 Retrying (13 of 20)...
    W 01:56:03 Retry Failed - Invalid Address For Write
    W 01:56:03 Retrying (14 of 20)...
    W 01:56:03 Retry Failed - Invalid Address For Write
    W 01:56:03 Retrying (15 of 20)...
    W 01:56:03 Retry Failed - Invalid Address For Write
    W 01:56:03 Retrying (16 of 20)...
    W 01:56:03 Retry Failed - Invalid Address For Write
    W 01:56:03 Retrying (17 of 20)...
    W 01:56:03 Retry Failed - Invalid Address For Write
    W 01:56:03 Retrying (18 of 20)...
    W 01:56:03 Retry Failed - Invalid Address For Write
    W 01:56:03 Retrying (19 of 20)...
    W 01:56:03 Retry Failed - Invalid Address For Write
    W 01:56:03 Retrying (20 of 20)...
    W 01:56:03 Retry Failed - Invalid Address For Write
    E 02:07:44 Failed to Write Sectors 0 - 31 - Unknown (Write Error) (0x0C, 0x80)
    I 02:07:44 Synchronising Cache...
    I 02:07:45 Closing Track...
    I 02:07:46 Finalising Disc...
    E 02:07:47 Failed to Write Image!
    E 02:07:47 Operation Failed! - Duration: 00:11:55
    I 02:07:47 Average Write Rate: N/A - Maximum Write Rate: N/A

    Also, the LG Drive won't recognize CD's of any kind or many DVD's (both retail and copied) and it's listed on my puter as a DVD-RAM Drive. Any advice would be a great help and "Thanks" in advance!
     
  2. JustanA

    JustanA Guest

    Sorry...here's the complete log from ImgBurn:

    I 01:55:09 ImgBurn Version 2.3.2.0 started!
    I 01:55:09 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)
    I 01:55:09 Total Physical Memory: 523,736 KB - Available: 153,340 KB
    W 01:55:09 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled!
    I 01:55:09 Initialising SPTI...
    I 01:55:09 Searching for SCSI / ATAPI devices...
    I 01:55:09 Found 1 DVD-ROM and 1 DVD±RW/RAM!
    I 01:55:52 Operation Started!
    I 01:55:52 Source File: H:\video temp\Heavy Metal.iso
    I 01:55:52 Source File Sectors: 1,678,431 (MODE1/2048)
    I 01:55:52 Source File Size: 3,437,426,688 bytes
    I 01:55:52 Source File Volume Identifier: HEAVY_METAL
    I 01:55:52 Source File Application Identifier: ELBY CLONEDVD
    I 01:55:52 Source File Implementation Identifier: ELABORATE BYTES
    I 01:55:52 Source File File System(s): ISO9660, UDF (1.02)
    I 01:55:52 Destination Device: [0:0:0] HL-DT-ST DVDRRW GSA-4166B 1.02 (F:) (ATA)
    I 01:55:52 Destination Media Type: DVD+R (Disc ID: MCC-004-00) (Speeds: 4x, 8x, 12x, 16x)
    I 01:55:52 Destination Media Sectors: 2,295,104
    I 01:55:52 Write Mode: DVD
    I 01:55:52 Write Type: DAO
    I 01:55:52 Write Speed: 4x
    I 01:55:52 Link Size: Auto
    I 01:55:52 Test Mode: No
    I 01:55:52 BURN-Proof: Enabled
    I 01:55:52 Filling Buffer... (20 MB)
    I 01:55:53 Writing LeadIn...
    W 01:56:03 Failed to Write Sectors 0 - 31 - Unknown (Write Error) (0x0C, 0x80)
    W 01:56:03 Retrying (1 of 20)...
    W 01:56:03 Retry Failed - No Seek Complete
    W 01:56:03 Retrying (2 of 20)...
    W 01:56:03 Retry Failed - Invalid Address For Write
    W 01:56:03 Retrying (3 of 20)...
    W 01:56:03 Retry Failed - Invalid Address For Write
    W 01:56:03 Retrying (4 of 20)...
    W 01:56:03 Retry Failed - Invalid Address For Write
    W 01:56:03 Retrying (5 of 20)...
    W 01:56:03 Retry Failed - Invalid Address For Write
    W 01:56:03 Retrying (6 of 20)...
    W 01:56:03 Retry Failed - Invalid Address For Write
    W 01:56:03 Retrying (7 of 20)...
    W 01:56:03 Retry Failed - Invalid Address For Write
    W 01:56:03 Retrying (8 of 20)...
    W 01:56:03 Retry Failed - Invalid Address For Write
    W 01:56:03 Retrying (9 of 20)...
    W 01:56:03 Retry Failed - Invalid Address For Write
    W 01:56:03 Retrying (10 of 20)...
    W 01:56:03 Retry Failed - Invalid Address For Write
    W 01:56:03 Retrying (11 of 20)...
    W 01:56:03 Retry Failed - Invalid Address For Write
    W 01:56:03 Retrying (12 of 20)...
    W 01:56:03 Retry Failed - Invalid Address For Write
    W 01:56:03 Retrying (13 of 20)...
    W 01:56:03 Retry Failed - Invalid Address For Write
    W 01:56:03 Retrying (14 of 20)...
    W 01:56:03 Retry Failed - Invalid Address For Write
    W 01:56:03 Retrying (15 of 20)...
    W 01:56:03 Retry Failed - Invalid Address For Write
    W 01:56:03 Retrying (16 of 20)...
    W 01:56:03 Retry Failed - Invalid Address For Write
    W 01:56:03 Retrying (17 of 20)...
    W 01:56:03 Retry Failed - Invalid Address For Write
    W 01:56:03 Retrying (18 of 20)...
    W 01:56:03 Retry Failed - Invalid Address For Write
    W 01:56:03 Retrying (19 of 20)...
    W 01:56:03 Retry Failed - Invalid Address For Write
    W 01:56:03 Retrying (20 of 20)...
    W 01:56:03 Retry Failed - Invalid Address For Write
    E 02:07:44 Failed to Write Sectors 0 - 31 - Unknown (Write Error) (0x0C, 0x80)
    I 02:07:44 Synchronising Cache...
    I 02:07:45 Closing Track...
    I 02:07:46 Finalising Disc...
    E 02:07:47 Failed to Write Image!
    E 02:07:47 Operation Failed! - Duration: 00:11:55
    I 02:07:47 Average Write Rate: N/A - Maximum Write Rate: N/A
     
  3. JustanA

    JustanA Guest

    and here's the fail log fron Nero when trying to burn an ISO from my HD:

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.70, size=45568 bytes, created 12/10/2001 5:32:34 PM
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM

    NT-SPTI used
    Nero Version: 7.5.0.2
    Internal Version: 7, 5, 0, 2

    Recorder: <HL-DT-ST DVDRRW GSA-4166B>Version: 1.02 - HA 1 TA 0 - 7.5.0.2
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <TOSHIBA DVD-ROM SD-M1502>Version: J816 - HA 1 TA 1 - 7.5.0.2
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : Maxtor 54610H6 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVDRRW GSA-4166B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : TOSHIBA DVD-ROM SD-M1502 atapi Port 1 ID 1 DMA: On
    DiskPeripheral : Promise 2+0 Stripe/RAID01.10 Fasttrak Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVDRRW GSA-4166B F: CDRom0
    TOSHIBA DVD-ROM SD-M1502 G: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    BUFE : 0
    Physical memory : 511MB (523736kB)
    Free physical memory: 50MB (51980kB)
    Memory in use : 90 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    7.6.2007
    Burn DVD Image
    5:51:55 PM #1 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 262144KB of Memory

    5:51:55 PM #2 Text 0 File Reader.cpp, Line 126
    Reader running

    5:51:55 PM #3 Text 0 File Writer.cpp, Line 123
    Writer F: HL-DT-ST DVDRRW GSA-4166B running

    5:51:55 PM #4 Text 0 File Burncd.cpp, Line 3436
    Turn on Disc-At-Once, using DVD media

    5:51:55 PM #5 Text 0 File DlgWaitCD.cpp, Line 298
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 1678580 (373:01.05, 3278MB)

    5:51:55 PM #6 Text 0 File DlgWaitCD.cpp, Line 310
    Write in overburning mode: NO (enabled: CD)

    5:51:55 PM #7 Text 0 File DlgWaitCD.cpp, Line 2824
    Recorder: HL-DT-ST DVDRRW GSA-4166B, Media type: DVD+R
    Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
    Disc Application Code: 0, Extended Information Indicators: 7

    5:51:55 PM #8 Text 0 File DlgWaitCD.cpp, Line 482
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    5:51:55 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 862
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
    2 indices, index0 (150) not provided
    original disc pos #0 + 1678581 (1678581) = #1678581/373:1.6
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1678581 blocks [F: HL-DT-ST DVDRRW GSA-4166B]
    --------------------------------------------------------------

    5:51:55 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1075
    Prepare recorder [F: HL-DT-ST DVDRRW GSA-4166B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3437733888, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    1678581 | lead-out | 1 | 0x41 | 0x00

    5:51:55 PM #11 Text 0 File SCSIPassThrough.cpp, Line 39
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    5:51:56 PM #12 Phase 24 File dlgbrnst.cpp, Line 1730
    Caching of files started

    5:51:56 PM #13 Text 0 File Burncd.cpp, Line 4267
    Cache writing successful.

    5:51:56 PM #14 Phase 25 File dlgbrnst.cpp, Line 1730
    Caching of files completed

    5:51:56 PM #15 Phase 36 File dlgbrnst.cpp, Line 1730
    Burn process started at 8x (11,080 KB/s)

    5:51:56 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2731
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    5:51:56 PM #17 Text 0 File Cdrdrv.cpp, Line 9176
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 7 h
    Disc Manufacturer ID: MCC.....
    Media type ID: 004
    Product revision number: 0
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8
    23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7..Tl.._......
    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

    5:51:56 PM #18 Text 0 File DVDR.cpp, Line 6032
    Drive: HL-DT-ST DVDRRW GSA-4166B
    Book Type request [LG]: DVD-ROM
    Changing the Book Type was finished successfully, return code 0

    5:51:56 PM #19 CDR -1207 File DVDR.cpp, Line 5955
    Book Type automatically set to: DVD-ROM

    5:51:56 PM #20 SPTI -1066 File SCSIPassThrough.cpp, Line 291
    F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
    Buffer x06bd6a00: Len x648

    5:51:56 PM #21 Text 0 File DVDPlusRW.cpp, Line 661
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    5:52:06 PM #22 SPTI -1064 File SCSIPassThrough.cpp, Line 291
    F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1064)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x21
    Sense Qual: 0x02
    CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 21 02
    Buffer x07260000: Len x10000
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    5:52:06 PM #23 CDR -1064 File Writer.cpp, Line 312
    Invalid block address
    F: HL-DT-ST DVDRRW GSA-4166B

    5:52:06 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    5:52:07 PM #25 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    5:52:07 PM #26 Phase 127 File dlgbrnst.cpp, Line 1730
    Generating DVD high compatibility borders

    5:52:07 PM #27 Phase 129 File dlgbrnst.cpp, Line 1730
    Generating DVD borders completed successfully

    5:52:07 PM #28 Phase 38 File dlgbrnst.cpp, Line 1730
    Burn process failed at 8x (11,080 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.70, size=17101 bytes, created 12/10/2001 5:29:42 PM

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option

    Since my post last night, I've switched out 80 pin IDE cables, installed Adaptec's ASPI update and tried and read everything I cold think of.
     

Share This Page