Mobile Phone Tools Download

@DaMan841
I had the same problem. My phone worked with MPT for an hour and then during a file transfer it just stopped detecting. This was before I updated to v3.25b. That could be your problem, or you may need to reinstall the correct driver if you already have MPT v3.25b.

@4tay
What does it look like now? If it displays correctly, you will be able to transfer numbers with three options. One is transfer from computer to phone, one is phone to computer and the third is transfer all (computer and phone) to a save file. That way you can back up both your computer and phone. The three buttons will be between the two explorer windows. Can you post a screenshot of what you see? I have posted a pic below of what it should look like.

 

I figured out my issue with the transmission and reception for those who need that info. In the General Setup, Under Communication, there are two check boxes. One for Send is Active and one for Receive is Active. By clicking those two, it fixed it so far. However, looking at CUnit's picture, I noticed his says Cingular GSM on the screen...I'm wondering why mine doesn't do the same? I have 3.25b, the latest one through live update.

 

delete

 

Never mind, I had a bogus program.

 

I already have 3.25b via live update. Took me the whole day using dialup. It is working fine. But I'm afraid it can be corrupted in the future and I don't want to go through live update all over again. Also, I probably will replace my current computer and would want to install V3.25b fresh. Would really be nice to install it one shot - no live update. I am sure most would appreciate if somebody can provide downloadable 3.25b for complete install!! Seems like the file provided by "cUNIT" is not straightforward. But is a good start. So how about it guys!!! THKS

 

So you can appreciate the pain I have to go through performing live update, here's what I had to do:
Starting from the current version I was able to find at that time, I had to perform live updates in stages as follows:
1)3.07a-->3.11h (12.36MB)
2)3.11h-->3.19 (19.32MB)
3)3.19--->3.19e ( 3.55MB)
4)3.19e-->3.20 ( 8.26MB)
5)3.20--->3.25b ( 9.78MB)

Now there seem to be 3.23 I found here as shown:

http://myskye.com/download/mpt323.exe (46MB)

This is close to 3.25b thus I am assuming live update would not be as painful. Anybody had any success with this?????

Thanks for your feedback.

 

totochan ... one option is to get a friend with broadband to download the file for you, put it on a thumbdrive or burn it on a CD.

For those who wanted to know ...
The version 3.25 that was put up recently which was a copy of someone's installed files seems to work by just putting the files in a folder on your hard drive EXCEPT for the phonebook feature. I tried this version on a drive that never had a previous version installed. The Phonebook should come up with a window split in two - the left side should have "My Computer" and the right side should have "Mobile Phone", just like when you bring up the Calendar feature.

The window that came up did have Phonebook at the top, but I could not see where to view my SIM card and it was not a window split into left and right.

In my version 3.23, right after the correct window comes up, the software then procedes to read the phone memory and the Sim card. I did not see this happening with ver. 3.25 plus there was a totally different phonebook window.

The multimedia feature worked though.

I then removed version 3.25 from the hard drive, installed ver 3.23, then copied back the 3.25 files into a separate folder from ver 3.23. After I did this, then the phonebook in ver 3.25 worked as it should.

I'm sticking with ver 3.23 since it works with both of my phones - V180 and V300.

 

Ochuts....
Yes Im aware I can use broadband somewhere else like going to my local library and using a flash drive but I travel a lot with my laptop and will not have broadband access.
Question: During the live update, is there an option to save the update file? I was not paying attention when I was doing this. I just automatically installed the updates. If there is a save option then it would be okay since I can always re-install the updates offline anytime.
The 3.23 version that you have, where did you get it? Will it support V3 Razr?
Thanks for the update....

 

I don't know where you are, but wherever I go with my laptop in the USA, I can usually get broadband access, free, even if I have to sit in a hotel lobby or parking lot.

I also did not see an option for saving the update, and since I really do not want to update to 3.25 I made sure I was not online when installing 3.23, which I got from a link on this forum - don't remember where exactly. About the V3 I can't say for sure but I don't see why not.

 

Ochuts....I go overseas a lot and broadband are mostly in Cyber Cafes where you will not be able to save files except floppys.
Did you downloaded v3.23 from this site:
http://myskye.com/download/mpt323.exe
I think I found this from this forum but hesitates to install to try as I dont want to screw up my 3.25b install which is working fine. I just wanted to have a backup 3.25b for future install but will settle for the 3.23 like you have if it will support V3. Can you please look at your 3.23 install if it will support the V3. You can find out by just pretending you have a V3 during the "General Setup" config. If you see the V3 as one of the models available to choose, then most likely it will support it. You also can go look at the "Skins" folder for V3 at the install location of your 3.23
Thanks a bunch..

 

Yes, totochan, that is where I got the 3.23 and I checked the Skins folder of my 3.23 install and it has one for the V3.

 

Ochuts thanks for checking. I will download the 3.23 then and use it as a backup for future use.

 

There is not an option for saving the v3.25b. It just automatically installs the update. Does anyone know anything about WinZIP or WinRAR? I don't know if there is a way to create a .exe program for an installed program. It gives the option of creating a .exe archive with WinRAR, but I don't know if that just means a .exe for the files, or the program itself. Any help would be appreciated. Thanks.

Has anyone tried using the Inf folder I posted? It has all of the correct drivers from v3.25. I am hoping that the driver issue will help most of the problems.

 

thanks

 

how can i put games with v3.25b ? My setup phone hasnt got any DIR with games, only audio, pictures, videos. How can i send to phone with v3.25b? My phone is Motorola V1050.

CHEERS

 

ARGGGHHH!!!! Read just about every message in this thread that applies to my situation, but can't get this working. Posting this in last ditch effort to get this working before I chuck everything out the window. Please help if you can guys. No dumb blonde here, but I've tried everything I can think of.

Specs:
Windows XP Pro SP1 (no hi-speed where i am to upgrade)
USB 1.0 i think
MPT 3.25b after update
Motorola USB Driver: Date 11/1/2005 Version 2.0.0.6
Motorola V3 phone

Hooked up phone initially to Machine1. Got connection immediately with different version of software and driver, but lost the connection soon after downloading phone book. Tried too many things to list. Thought other USB devices may be interfering, so switched to Machine2 that has above specs. Now I'm in the same boat many of you were stuck in. Program claims 'initializing' but isn't. Instead, I get a 'communication port not available' or 'mobile not connected' icon on the programs phone screen. Sinking fast. Throw me a bone. Thnx.

 

Geminigirl, try this, am no computer expert but it worked for me (V265 with WinXPPro):
1) go to device manager and shutdown the regular modem (seems MPT fights for COM 3 or 4);
2) reinstall driver for the mobile phone (use the manual option and make sure you get the driver at the same folder MPT is installed at);
3) reboot
4) load MPT and when you get to the "initializing" point turn off the phone and then on again... voilà, the two gizmos started talking to each other.... good luck!

 

Can someone help please. I have a motorola v265 and I'm looking for the tools I need to hack the verizon code in it. all I have for tools is the motorola mpt the newest version. I can't seem to find a good link to download the other tools I need to do the job. I've been looking on the web and in here for a day and 1/2 with no luck. please help. You can email me at ace50252@direcway.com with any info. Thanks in advance!!!

 

giminigirl, here's what you need to do. This was originally posted by "Stink". This works for my V3 and 3.25b all the time.

Now if it gets stuck in initializing, do the following:

Modified from Stink for more clarity:
As it trying to initializing forever do the following:
1) Press the "Menu" icon on the Phone
2) Select "Setup"
3) Select "General Setup F6"
4) Select "Communication"
5) Select "Modem Exchange"
6) Push the "select from list" button (manual selection)
7) Select "Motorola GSM" from the left screen
8) Select "Fone Model V3" from the right screen
Click "next" or "finish" not sure exactly but from here on it should start detecting the V3 and will now start working. I do this every now and then when it gets stuck in the "initializing" phase and works all the time.

 

I meant......

1) Press the "Menu" icon on the Phone as shown on the computer NOT the phone itself.