Most Recent Starview original Software ?

Hi
Could someone please confirm the most up to date Original Starview Box software....
Is it the following: STARVIEW_H20070607_400eE_api

Thanks in advance

 

Correct .. That is the latest firmware for Genuines and will auto-roll codes

 

Thanks for an instant reply

 

No problem and your welcome

 

Hi,

What updates are contained in the 400_api versus the 300_api?

I updated to 300 a while ago because I couldnt get the v400 to work. Just wondering is there much of a difference to warrant updating again?

Thanks,
Mal

 

300 was a right pain as it was giving major problems,vers 4.00 is the one for original starviews or u can use 257ee fixed for original and clones what problem did u have with v.4?

 

The v400 api from this link: http://forums.afterdawn.com/thread_view.cfm/493446
didn't work for me the 2 or 3 times I tried it. It kept giving me the knightrider (lights scrolling horizontally) error on my starview box. Bad flash I know.
I got the one from Eamos FTA Site yesterday and that worked fine.
Thanks for the reply,
Mal

 

Thanks for your files.

Very helpfull.

 

Always make sure you check to see if you have a clone box or not before putting any firmware on the starview 1 boxes

you can open this in your browser window to view

CLONE OR NOT DOWNLOAD

http://www.4shared.com/file/40663290/4c5a5afb/Clone_or_Not.html?dirPwdVerified=fa0dfbb0

 

Im a newbie here, Im in the Dublin area and my starview box tries to update every once in a while. i have it about 10 months and never had much problems??

 

well your lucky so your box must have the autoroll firmware on it

 

Hi Guys,
I have an original starview for about one and a half years operating on ver257 and have always input the codes. I could not upgrade to autoroll versions as I did not have a com port on my new P.C.

Just received a usb to null modem cable adaptor this morning and I am going to install ver 4.

My question is before I install ver4 do I have to do a factory re-set or similar before installing or will it just automatically overwrite / update the old ver257.

Its probably just a stupid question but its in my nature to ask before I attempt anything.

Cheers guys,
Garry

 

No you do not need to - just go ahead and flash the firmware V.400 on to the box - if you need any thing you will find it in Eamo's Library under Fergus's posts above.

 

no need to do a factory reset.
it will overwrite the existing firmware.
just make sure its a genuine b0x for the _400eE_ firmware.

 

Sorry just noticed it is under Cetic's post as below, cheers.

http://eko.4shared.com/

 

Thanks guys for the quick response,I will try it later.I have checked to see if it is a genuine starview several times and will check again just befor I update.

Thanks again guys,

Garry

 

Hi guys,I have tried to flash my starview for the last two hours but to no avail. I have downloaded the ver4 firmware, ver4 gtrom loader and the usb to serial adapter drivers.

when I try to download the serial port is set to com1, I have tried 2 3 and 4 but to no avail.I only have a usb connection on my P.C. but it does not seem to pick it up

the message I get is " cannot open serial port " and last error " system cannot find the file specified"

I feel a bit frazzled now so any help would be appreciated.

Garry

 

Garry,
Have a look down celtic71`s post here
>>> http://forums.afterdawn.com/thread_view.cfm/2/641862

you`ll find all the info there.

 

Thaaaaaaaaaaaaaaaaaaaank you, I cannot believe it was that easy when you know what to do. I cannot ever repay you. The only downside is I wont have to be on this website as often now. Thanks again.

Rgds,
Garry

 

i think its celtic you should be thanking.
Glad you got it sorted Garry.