Moved to Here http://forums.afterdawn.com/thread_view.cfm/531363

are you selecting n*l as your provider when your scanning

 

i no its a bit stupid but did you actually pick n*l.are you sure you didn't pick tele**** or something else

 

there has been some mind boggling problems tonight.

 

Ntl, automatic scan, (1/45) every1 failed, it was working fine half an hour ago, stupid me reset factory settings trying to get ch4 back then this happens, i am so stupid i have f***ed it up now

 

factory reset it again you should find about 53 transponders to search from

 

don't worry you will find a fix at some point

 

ok peoples going to go to bed hope all will be well in the morn.goodnight

 

did factory reset again, put EMU on checked codes, then selected NTL then auto scan, still saying failed beside them. there has to be a way?

 

goodnight ryan

 

Goodnight ryan

 

any help

 

ok go into manual scan and tell me what the symbol rate is, it should be 6887, scroll down to network scan and enable then press ok

 

so3bfof9
have u checked aerial lead in tight

 

down freq at zero symbol rate 6887

 

ok as a test change the down frequency to 347500 and press ok to scan and lets see does it pick up anything

 

nothing came up on that freq

 

try this turn box off at the back and than on.
factory reset
set defalt key
put rite codes in
then aotoscan(ntl)
then emu on

 

i have eleven channels back don't know how

 

well mate it sounds as if you dont have a signal coming into the box, is your normal tv working if you plug the lead straight into your tv? are all your connections tight? have you the lead in the cable in socket?

 

you would have got them by doing the manual scan on the frequency i gave you at least were getting somewhere