I have a LG super multi DVD/CD rewriter, and resently I encountered a problem. I can't burn any cd/dvd either by Nero or Clone dvd or any other burning program. Specifically when I try to burn dvds in Nero, the proceedure is cancelled at 1%, and a message appears as shown in this thread. I used to burn dvds in a particular version of Nero, with certain dvd discs (brands) and never had any problem.. It's been a few days now that nothing can be burned either by Nero or Clone DVD or any other program. I even tried different write speeds but with no positive result... The question I want to raise is if it something to do with the options/preferances of my pc or something with my LG's lens.. To my surprise, half an hour ago I tried to burn a dvd and everything went well... After that, my second attempt to burn another dvd once again resulted to my disappointment. I don't know if the problem will persist, or it was just a 5-day rest of my LG but any help would be appreciated... Luckily I'm still on guarrantee!! Thank you!!!
Thank you for your quick responce. I am a completely ignorant when it comes to Nero.. how do I do that??
Nero history logs are located here Nero 6 history log location: Program Files>Ahead>Nero>NeroHistory.txt Nero 7 history log location: Program Files>Nero>Nero 7>Core>NeroHistory Just cut and paste log into message box.
Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 3:23:24 πμ ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 5:35:34 μμ Nero API version: 6.6.0.3 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Recorder: <HL-DT-ST DVDRAM GSA-H10N>Version: JL10 - HA 1 TA 0 - 6.6.0.3 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : ATAPI DVD-ROM 16XMax atapi Port 0 ID 1 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-H10N atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === ATAPI DVD-ROM 16XMax D: CDRom0 HL-DT-ST DVDRAM GSA-H10N E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 213MB (218120kB) Memory in use : 58 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.3.2007 NeroAPI 12:47:13 μμ #1 Text 0 File Reader.cpp, Line 127 Reader running 12:47:13 μμ #2 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRAM GSA-H10N running 12:47:13 μμ #3 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 12:47:13 μμ #4 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 12:47:13 μμ #5 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 12:47:13 μμ #6 Text 0 File Burncd.cpp, Line 3151 Turn on Disc-At-Once, using DVD media 12:47:14 μμ #7 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2232713 (496:09.38, 4360MB) 12:47:14 μμ #8 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO 12:47:14 μμ #9 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: HL-DT-ST DVDRAM GSA-H10N, Media type: DVD+R Disc Manufacturer ID: INFOME, Media Type ID: R30, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 7 12:47:14 μμ #10 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:47:14 μμ #11 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2232864 (2232864) = #2232864/496:11.39 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2232864 blocks [HL-DT-ST DVDRAM GSA-H10N] -------------------------------------------------------------- 12:47:14 μμ #12 Text 0 File ThreadedTransferInterface.cpp, Line 1040 Prepare recorder [HL-DT-ST DVDRAM GSA-H10N] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 277938176, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2232864 | lead-out | 1 | 0x41 | 0x00 12:47:15 μμ #13 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 12:47:15 μμ #14 Text 0 File Burncd.cpp, Line 4038 Cache writing successful. 12:47:15 μμ #15 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 12:47:15 μμ #16 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 4x (5.540 KB/s) 12:47:15 μμ #17 Text 0 File ThreadedTransferInterface.cpp, Line 2596 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 12:47:15 μμ #18 Text 0 File Cdrdrv.cpp, Line 8315 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: INFOME.. Media type ID: R30 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 49 4E 46 4F 4D - 45 00 00 52 33 30 00 38 ...INFOME..R30.8 23 54 37 13 02 52 6C 02 - 7C 5D 15 15 0B 0A 08 08 #T7..Rl.|]...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 12:47:15 μμ #19 Text 0 File DVDPlusRW.cpp, Line 608 Start write address at LBA 0 DVD high compatibility mode: No 1:01:33 μμ #20 Text 0 File WriterStatus.cpp, Line 116 <HL-DT-ST DVDRAM GSA-H10N > start writing Lead-Out at LBA 2232864 (221220h), lenght 0 blocks 1:01:33 μμ #21 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 1:02:08 μμ #22 Phase 37 File APIProgress.cpp, Line 276 Burn process completed successfully at 4x (5.540 KB/s) 1:02:09 μμ #23 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 1:02:09 μμ #24 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 4:02:46 πμ File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 2/11/2002 9:53:04 πμ Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) [26.03.2007]------------------------------------ 12:47:12 Robot error messages from: ====== *** NeroAPI, History File *** ====== Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 3:23:24 πμ ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 5:35:34 μμ Nero version: 6.6.0.3 (Nero Express) Recorder: <HL-DT-ST DVDRAM GSA-H10N>Version: JL10 - HA 1 TA 0 - 6.6.0.3 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <HL-DT-ST DVDRAM GSA-H10N >Version: JL10 - HA 1 TA 0 - 6.6.0.3 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : ATAPI DVD-ROM 16XMax atapi Port 0 ID 1 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-H10N atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === ATAPI DVD-ROM 16XMax D: CDRom0 HL-DT-ST DVDRAM GSA-H10N E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 168MB (172264kB) Memory in use : 67 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.3.2007 CD-ROM (ISO) 3:43:29 μμ #1 Text 0 File Isodoc.cpp, Line 6168 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 3:43:29 μμ #2 Text 0 File Burncd.cpp, Line 2866 HL-DT-ST DVDRAM GSA-H10N Buffer underrun protection activated 3:43:30 μμ #3 Text 0 File Reader.cpp, Line 127 Reader running 3:43:30 μμ #4 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRAM GSA-H10N running 3:43:30 μμ #5 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 3:43:30 μμ #6 Text 0 File Burncd.cpp, Line 3151 Turn on Track-at-once, using CD-R/RW media 3:43:30 μμ #7 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 19386 ( 4:20.36) 3:43:30 μμ #8 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 3:43:30 μμ #9 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: HL-DT-ST DVDRAM GSA-H10N; CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd. ATIP Data: Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 3:43:30 μμ #10 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 3:43:30 μμ #11 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 19387 (19387) = #19387/4:18.37 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 19385 blocks [HL-DT-ST DVDRAM GSA-H10N] -------------------------------------------------------------- 3:43:30 μμ #12 Text 0 File ThreadedTransferInterface.cpp, Line 1040 Prepare recorder [HL-DT-ST DVDRAM GSA-H10N] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 40011776, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0x00 -150 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 19387 | lead-out | 1 | 0x41 | 0x00 3:43:30 μμ #13 Text 0 File ThreadedTransferInterface.cpp, Line 1105 Removed 2 run-out blocks from end of track 1. Length: 19387 -> 19385. 3:43:30 μμ #14 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 3:43:30 μμ #15 Text 0 File Burncd.cpp, Line 4038 Cache writing successful. 3:43:30 μμ #16 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 3:43:30 μμ #17 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 48x (7.200 KB/s) 3:43:30 μμ #18 Text 0 File ThreadedTransferInterface.cpp, Line 2596 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 3:43:30 μμ #19 Text 0 File Mmc.cpp, Line 21025 Set BUFE: Buffer underrun protection -> ON 3:43:58 μμ #20 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 3:44:02 μμ #21 Text 0 File Mmc.cpp, Line 15737 <HL-DT-STDVDRAM GSA-H10N > start Close Session 3:44:22 μμ #22 Phase 37 File dlgbrnst.cpp, Line 1832 Burn process completed successfully at 48x (7.200 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 4:02:46 πμ File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 2/11/2002 9:53:04 πμ File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4/8/2004 8:59:42 πμ (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 3:23:24 πμ ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 5:35:34 μμ Nero version: 6.6.0.3 (Nero Express) Recorder: <HL-DT-ST DVDRAM GSA-H10N>Version: JL10 - HA 1 TA 0 - 6.6.0.3 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <HL-DT-ST DVDRAM GSA-H10N >Version: JL10 - HA 1 TA 0 - 6.6.0.3 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : ATAPI DVD-ROM 16XMax atapi Port 0 ID 1 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-H10N atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === ATAPI DVD-ROM 16XMax D: CDRom0 HL-DT-ST DVDRAM GSA-H10N E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 164MB (168724kB) Memory in use : 67 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 27.3.2007 ISO compilation 4:11:11 μμ #1 Text 0 File Isodoc.cpp, Line 6168 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 4:11:11 μμ #2 Text 0 File Reader.cpp, Line 127 Reader running 4:11:11 μμ #3 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRAM GSA-H10N running 4:11:11 μμ #4 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 4:11:11 μμ #5 Text 0 File Burncd.cpp, Line 3151 Turn on Disc-at-once, using DVD media 4:11:12 μμ #6 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1989721 (442:09.46, 3886MB) 4:11:12 μμ #7 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 4:11:12 μμ #8 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: HL-DT-ST DVDRAM GSA-H10N, Media type: DVD+R Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4 Disc Application Code: 0, Extended Information Indicators: 7 4:11:12 μμ #9 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 4:11:12 μμ #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1989872 (1989872) = #1989872/442:11.47 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1989872 blocks [HL-DT-ST DVDRAM GSA-H10N] -------------------------------------------------------------- 4:11:12 μμ #11 Text 0 File ThreadedTransferInterface.cpp, Line 1040 Prepare recorder [HL-DT-ST DVDRAM GSA-H10N] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4075257856, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1989872 | lead-out | 1 | 0x41 | 0x00 4:11:13 μμ #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 4:11:13 μμ #13 Text 0 File Burncd.cpp, Line 4038 Cache writing successful. 4:11:13 μμ #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 4:11:13 μμ #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5.540 KB/s) 4:11:13 μμ #16 Text 0 File ThreadedTransferInterface.cpp, Line 2596 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 4:11:13 μμ #17 Text 0 File Cdrdrv.cpp, Line 8315 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: RICOHJPN Media type ID: R03 Product revision number: 4 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8 23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 4:11:13 μμ #18 Text 0 File DVDPlusRW.cpp, Line 608 Start write address at LBA 0 DVD high compatibility mode: Yes 4:23:41 μμ #19 Text 0 File WriterStatus.cpp, Line 116 <HL-DT-ST DVDRAM GSA-H10N > start writing Lead-Out at LBA 1989872 (1E5CF0h), lenght 0 blocks 4:23:42 μμ #20 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 4:24:17 μμ #21 Phase 37 File dlgbrnst.cpp, Line 1832 Burn process completed successfully at 4x (5.540 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 4:02:46 πμ File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 2/11/2002 9:53:04 πμ File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4/8/2004 8:59:42 πμ (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 3:23:24 πμ ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 5:35:34 μμ Nero version: 6.6.0.3 (Nero Express) Recorder: <HL-DT-ST DVDRAM GSA-H10N>Version: JL10 - HA 1 TA 0 - 6.6.0.3 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <HL-DT-ST DVDRAM GSA-H10N >Version: JL10 - HA 1 TA 0 - 6.6.0.3 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : ATAPI DVD-ROM 16XMax atapi Port 0 ID 1 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-H10N atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === ATAPI DVD-ROM 16XMax D: CDRom0 HL-DT-ST DVDRAM GSA-H10N E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 177MB (181872kB) Memory in use : 65 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 27.3.2007 ISO compilation 5:52:51 μμ #1 Text 0 File Isodoc.cpp, Line 6168 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 5:52:51 μμ #2 Text 0 File Reader.cpp, Line 127 Reader running 5:52:51 μμ #3 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRAM GSA-H10N running 5:52:51 μμ #4 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 5:52:51 μμ #5 Text 0 File Burncd.cpp, Line 3151 Turn on Disc-at-once, using DVD media 5:52:52 μμ #6 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 744665 (165:28.65, 1454MB) 5:52:52 μμ #7 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 5:52:52 μμ #8 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: HL-DT-ST DVDRAM GSA-H10N, Media type: DVD+R Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4 Disc Application Code: 0, Extended Information Indicators: 7 5:52:52 μμ #9 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 5:52:52 μμ #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 744816 (744816) = #744816/165:30.66 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 744816 blocks [HL-DT-ST DVDRAM GSA-H10N] -------------------------------------------------------------- 5:52:52 μμ #11 Text 0 File ThreadedTransferInterface.cpp, Line 1040 Prepare recorder [HL-DT-ST DVDRAM GSA-H10N] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1525383168, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 744816 | lead-out | 1 | 0x41 | 0x00 5:52:52 μμ #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 5:52:52 μμ #13 Text 0 File Burncd.cpp, Line 4038 Cache writing successful. 5:52:52 μμ #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 5:52:52 μμ #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5.540 KB/s) 5:52:52 μμ #16 Text 0 File ThreadedTransferInterface.cpp, Line 2596 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 5:52:52 μμ #17 Text 0 File Cdrdrv.cpp, Line 8315 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: RICOHJPN Media type ID: R03 Product revision number: 4 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8 23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 5:52:52 μμ #18 Text 0 File DVDPlusRW.cpp, Line 608 Start write address at LBA 0 DVD high compatibility mode: Yes 5:57:40 μμ #19 Text 0 File WriterStatus.cpp, Line 116 <HL-DT-ST DVDRAM GSA-H10N > start writing Lead-Out at LBA 744816 (B5D70h), lenght 0 blocks 5:57:40 μμ #20 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 5:58:20 μμ #21 Phase 37 File dlgbrnst.cpp, Line 1832 Burn process completed successfully at 4x (5.540 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 4:02:46 πμ File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 2/11/2002 9:53:04 πμ File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4/8/2004 8:59:42 πμ (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 3:23:24 πμ ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 5:35:34 μμ Nero version: 6.6.0.3 (Nero Express) Recorder: <HL-DT-ST DVDRAM GSA-H10N>Version: JL10 - HA 1 TA 0 - 6.6.0.3 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <HL-DT-ST DVDRAM GSA-H10N >Version: JL10 - HA 1 TA 0 - 6.6.0.3 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : ATAPI DVD-ROM 16XMax atapi Port 0 ID 1 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-H10N atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === ATAPI DVD-ROM 16XMax D: CDRom0 HL-DT-ST DVDRAM GSA-H10N E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 157MB (161680kB) Memory in use : 69 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 29.3.2007 ISO compilation 2:42:19 μμ #1 Text 0 File Isodoc.cpp, Line 6168 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 2:42:20 μμ #2 Text 0 File Reader.cpp, Line 127 Reader running 2:42:20 μμ #3 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRAM GSA-H10N running 2:42:20 μμ #4 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 2:42:20 μμ #5 Text 0 File Burncd.cpp, Line 3151 Turn on Disc-at-once, using DVD media 2:42:20 μμ #6 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2283241 (507:23.16, 4459MB) 2:42:20 μμ #7 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 2:42:20 μμ #8 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: HL-DT-ST DVDRAM GSA-H10N, Media type: DVD+R Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4 Disc Application Code: 0, Extended Information Indicators: 7 2:42:20 μμ #9 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 2:42:20 μμ #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2283392 (2283392) = #2283392/507:25.17 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2283392 blocks [HL-DT-ST DVDRAM GSA-H10N] -------------------------------------------------------------- 2:42:20 μμ #11 Text 0 File ThreadedTransferInterface.cpp, Line 1040 Prepare recorder [HL-DT-ST DVDRAM GSA-H10N] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 381419520, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2283392 | lead-out | 1 | 0x41 | 0x00 2:42:20 μμ #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 2:42:20 μμ #13 Text 0 File Burncd.cpp, Line 4038 Cache writing successful. 2:42:20 μμ #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 2:42:20 μμ #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 12x (16.620 KB/s) 2:42:20 μμ #16 Text 0 File ThreadedTransferInterface.cpp, Line 2596 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 2:42:20 μμ #17 Text 0 File Cdrdrv.cpp, Line 8315 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: RICOHJPN Media type ID: R03 Product revision number: 4 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8 23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 2:42:20 μμ #18 Text 0 File DVDPlusRW.cpp, Line 608 Start write address at LBA 0 DVD high compatibility mode: Yes 2:48:26 μμ #19 Text 0 File WriterStatus.cpp, Line 116 <HL-DT-ST DVDRAM GSA-H10N > start writing Lead-Out at LBA 2283392 (22D780h), lenght 0 blocks 2:48:26 μμ #20 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 2:48:45 μμ #21 Phase 37 File dlgbrnst.cpp, Line 1832 Burn process completed successfully at 12x (16.620 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 4:02:46 πμ File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 2/11/2002 9:53:04 πμ File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4/8/2004 8:59:42 πμ (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 3:23:24 πμ ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 5:35:34 μμ Nero version: 6.6.0.3 (Nero Express) Recorder: <HL-DT-ST DVDRAM GSA-H10N>Version: JL10 - HA 1 TA 0 - 6.6.0.3 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <HL-DT-ST DVDRAM GSA-H10N >Version: JL10 - HA 1 TA 0 - 6.6.0.3 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : ATAPI DVD-ROM 16XMax atapi Port 0 ID 1 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-H10N atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === ATAPI DVD-ROM 16XMax D: CDRom0 HL-DT-ST DVDRAM GSA-H10N E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 177MB (182224kB) Memory in use : 65 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 29.3.2007 CD-ROM (ISO) 2:57:20 μμ #1 Text 0 File Isodoc.cpp, Line 6168 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 2:57:20 μμ #2 Text 0 File Burncd.cpp, Line 2866 HL-DT-ST DVDRAM GSA-H10N Buffer underrun protection activated 2:57:20 μμ #3 Text 0 File Reader.cpp, Line 127 Reader running 2:57:20 μμ #4 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRAM GSA-H10N running 2:57:20 μμ #5 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 2:57:20 μμ #6 Text 0 File Burncd.cpp, Line 3151 Turn on Track-at-once, using CD-R/RW media 2:57:20 μμ #7 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 294731 ( 65:31.56) 2:57:20 μμ #8 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 2:57:20 μμ #9 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: HL-DT-ST DVDRAM GSA-H10N; CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd. ATIP Data: Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 2:57:20 μμ #10 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 2:57:20 μμ #11 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 294732 (294732) = #294732/65:29.57 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 294730 blocks [HL-DT-ST DVDRAM GSA-H10N] -------------------------------------------------------------- 2:57:20 μμ #12 Text 0 File ThreadedTransferInterface.cpp, Line 1040 Prepare recorder [HL-DT-ST DVDRAM GSA-H10N] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 603918336, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0x00 -150 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 294732 | lead-out | 1 | 0x41 | 0x00 2:57:20 μμ #13 Text 0 File ThreadedTransferInterface.cpp, Line 1105 Removed 2 run-out blocks from end of track 1. Length: 294732 -> 294730. 2:57:20 μμ #14 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 2:57:21 μμ #15 Text 0 File Burncd.cpp, Line 4038 Cache writing successful. 2:57:21 μμ #16 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 2:57:21 μμ #17 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 8x (1.200 KB/s) 2:57:21 μμ #18 Text 0 File ThreadedTransferInterface.cpp, Line 2596 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 2:57:21 μμ #19 Text 0 File Mmc.cpp, Line 21025 Set BUFE: Buffer underrun protection -> ON 3:05:38 μμ #20 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 3:05:42 μμ #21 Text 0 File Mmc.cpp, Line 15737 <HL-DT-STDVDRAM GSA-H10N > start Close Session 3:06:18 μμ #22 Phase 37 File dlgbrnst.cpp, Line 1832 Burn process completed successfully at 8x (1.200 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 4:02:46 πμ File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 2/11/2002 9:53:04 πμ File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4/8/2004 8:59:42 πμ (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 3:23:24 πμ ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 5:35:34 μμ Nero version: 6.6.0.3 (Nero Express) Recorder: <HL-DT-ST DVDRAM GSA-H10N>Version: JL10 - HA 1 TA 0 - 6.6.0.3 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <HL-DT-ST DVDRAM GSA-H10N >Version: JL10 - HA 1 TA 0 - 6.6.0.3 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : ATAPI DVD-ROM 16XMax atapi Port 0 ID 1 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-H10N atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === ATAPI DVD-ROM 16XMax D: CDRom0 HL-DT-ST DVDRAM GSA-H10N E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 100MB (102452kB) Memory in use : 80 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 29.3.2007 CD-ROM (ISO) 5:03:27 μμ #1 Text 0 File Isodoc.cpp, Line 6168 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 5:03:27 μμ #2 Text 0 File Burncd.cpp, Line 2866 HL-DT-ST DVDRAM GSA-H10N Buffer underrun protection activated 5:03:27 μμ #3 Text 0 File Reader.cpp, Line 127 Reader running 5:03:27 μμ #4 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRAM GSA-H10N running 5:03:27 μμ #5 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 5:03:27 μμ #6 Text 0 File Burncd.cpp, Line 3151 Turn on Track-at-once, using CD-R/RW media 5:03:27 μμ #7 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 245102 ( 54:30.02) 5:03:27 μμ #8 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 5:03:27 μμ #9 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: HL-DT-ST DVDRAM GSA-H10N; CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd. ATIP Data: Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 5:03:27 μμ #10 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 5:03:27 μμ #11 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 245103 (245103) = #245103/54:28.3 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 245101 blocks [HL-DT-ST DVDRAM GSA-H10N] -------------------------------------------------------------- 5:03:27 μμ #12 Text 0 File ThreadedTransferInterface.cpp, Line 1040 Prepare recorder [HL-DT-ST DVDRAM GSA-H10N] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 502278144, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0x00 -150 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 245103 | lead-out | 1 | 0x41 | 0x00 5:03:27 μμ #13 Text 0 File ThreadedTransferInterface.cpp, Line 1105 Removed 2 run-out blocks from end of track 1. Length: 245103 -> 245101. 5:03:27 μμ #14 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 5:03:28 μμ #15 Text 0 File Burncd.cpp, Line 4038 Cache writing successful. 5:03:28 μμ #16 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 5:03:28 μμ #17 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 8x (1.200 KB/s) 5:03:28 μμ #18 Text 0 File ThreadedTransferInterface.cpp, Line 2596 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 5:03:28 μμ #19 Text 0 File Mmc.cpp, Line 21025 Set BUFE: Buffer underrun protection -> ON 5:10:24 μμ #20 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 5:10:31 μμ #21 Text 0 File Mmc.cpp, Line 15737 <HL-DT-STDVDRAM GSA-H10N > start Close Session 5:11:07 μμ #22 Phase 37 File dlgbrnst.cpp, Line 1832 Burn process completed successfully at 8x (1.200 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 4:02:46 πμ File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 2/11/2002 9:53:04 πμ File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4/8/2004 8:59:42 πμ (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 3:23:24 πμ ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 5:35:34 μμ Nero version: 6.6.0.3 Recorder: <HL-DT-ST DVDRAM GSA-H10N>Version: JL10 - HA 1 TA 0 - 6.6.0.3 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <HL-DT-ST DVDRAM GSA-H10N >Version: JL10 - HA 1 TA 0 - 6.6.0.3 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : ATAPI DVD-ROM 16XMax atapi Port 0 ID 1 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-H10N atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === ATAPI DVD-ROM 16XMax D: CDRom0 HL-DT-ST DVDRAM GSA-H10N E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 97MB (100124kB) Memory in use : 80 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 10.4.2007 Burn DVD Image 10:26:27 πμ #1 Text 0 File Reader.cpp, Line 127 Reader running 10:26:27 πμ #2 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRAM GSA-H10N running 10:26:27 πμ #3 Text 0 File Burncd.cpp, Line 3151 Turn on Disc-at-once, using DVD media 10:26:28 πμ #4 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2181727 (484:49.52, 4261MB) 10:26:28 πμ #5 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 10:26:28 πμ #6 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: HL-DT-ST DVDRAM GSA-H10N, Media type: DVD+R Disc Manufacturer ID: INFOME, Media Type ID: R30, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 7 10:26:28 πμ #7 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:26:28 πμ #8 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 2181878 (2181878) = #2181878/484:51.53 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2181878 blocks [HL-DT-ST DVDRAM GSA-H10N] -------------------------------------------------------------- 10:26:28 πμ #9 Text 0 File ThreadedTransferInterface.cpp, Line 1040 Prepare recorder [HL-DT-ST DVDRAM GSA-H10N] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 173518848, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2181878 | lead-out | 1 | 0x41 | 0x00 10:26:28 πμ #10 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 8x (11.080 KB/s) 10:26:28 πμ #11 Text 0 File ThreadedTransferInterface.cpp, Line 2596 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:26:28 πμ #12 Text 0 File Cdrdrv.cpp, Line 8315 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: INFOME.. Media type ID: R30 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 49 4E 46 4F 4D - 45 00 00 52 33 30 00 38 ...INFOME..R30.8 23 54 37 13 02 52 6C 02 - 7C 5D 15 15 0B 0A 08 08 #T7..Rl.|]...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 10:26:28 πμ #13 Text 0 File DVDPlusRW.cpp, Line 608 Start write address at LBA 0 DVD high compatibility mode: No 10:34:06 πμ #14 Text 0 File WriterStatus.cpp, Line 116 <HL-DT-ST DVDRAM GSA-H10N > start writing Lead-Out at LBA 2181878 (214AF6h), lenght 0 blocks 10:34:07 πμ #15 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:34:27 πμ #16 Phase 37 File dlgbrnst.cpp, Line 1832 Burn process completed successfully at 8x (11.080 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 4:02:46 πμ File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 2/11/2002 9:53:04 πμ File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4/8/2004 8:59:42 πμ (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 3:23:24 πμ ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 5:35:34 μμ Nero version: 6.6.0.3 (Nero Express) Recorder: <HL-DT-ST DVDRAM GSA-H10N>Version: JL10 - HA 1 TA 0 - 6.6.0.3 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <HL-DT-ST DVDRAM GSA-H10N >Version: JL10 - HA 1 TA 0 - 6.6.0.3 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : ATAPI DVD-ROM 16XMax atapi Port 0 ID 1 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-H10N atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === ATAPI DVD-ROM 16XMax D: CDRom0 HL-DT-ST DVDRAM GSA-H10N E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 111MB (114188kB) Memory in use : 78 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 11.4.2007 ISO compilation 7:17:30 μμ #1 Text 0 File Isodoc.cpp, Line 6168 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 7:17:30 μμ #2 Text 0 File Reader.cpp, Line 127 Reader running 7:17:30 μμ #3 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRAM GSA-H10N running 7:17:30 μμ #4 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 7:17:30 μμ #5 Text 0 File Burncd.cpp, Line 3151 Turn on Disc-at-once, using DVD media 7:17:31 μμ #6 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2283241 (507:23.16, 4459MB) 7:17:31 μμ #7 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 7:17:31 μμ #8 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: HL-DT-ST DVDRAM GSA-H10N, Media type: DVD+R Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4 Disc Application Code: 0, Extended Information Indicators: 7 7:17:31 μμ #9 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 7:17:31 μμ #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2283392 (2283392) = #2283392/507:25.17 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2283392 blocks [HL-DT-ST DVDRAM GSA-H10N] -------------------------------------------------------------- 7:17:31 μμ #11 Text 0 File ThreadedTransferInterface.cpp, Line 1040 Prepare recorder [HL-DT-ST DVDRAM GSA-H10N] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 381419520, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2283392 | lead-out | 1 | 0x41 | 0x00 7:17:31 μμ #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 7:17:31 μμ #13 Text 0 File Burncd.cpp, Line 4038 Cache writing successful. 7:17:31 μμ #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 7:17:31 μμ #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 8x (11.080 KB/s) 7:17:31 μμ #16 Text 0 File ThreadedTransferInterface.cpp, Line 2596 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 7:17:31 μμ #17 Text 0 File Cdrdrv.cpp, Line 8315 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: RICOHJPN Media type ID: R03 Product revision number: 4 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8 23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 7:17:31 μμ #18 Text 0 File DVDPlusRW.cpp, Line 608 Start write address at LBA 0 DVD high compatibility mode: Yes 7:17:49 μμ #19 SCSI -1135 File Cdrdrv.cpp, Line 1430 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03984000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10 0x35 0x2D 0x03 0x0E 0x0C 0x00 7:17:49 μμ #20 SCSI -1064 File Cdrdrv.cpp, Line 1430 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x060B0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x21 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x10 0x2A 0x00 0x00 0x0E 0x21 0x02 7:17:49 μμ #21 CDR -1135 File Writer.cpp, Line 311 Write error HL-DT-ST DVDRAM GSA-H10N\H1 T0 7:17:49 μμ #22 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 7:17:50 μμ #23 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 7:18:35 μμ #24 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 7:18:36 μμ #25 SCSI -1135 File Cdrdrv.cpp, Line 1176 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10 0x35 0x2D 0x03 0x0E 0x0C 0x00 7:18:36 μμ #26 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 7:18:36 μμ #27 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 8x (11.080 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 4:02:46 πμ File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 2/11/2002 9:53:04 πμ File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4/8/2004 8:59:42 πμ (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 3:23:24 πμ ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 5:35:34 μμ Nero version: 6.6.0.3 (Nero Express) Recorder: <HL-DT-ST DVDRAM GSA-H10N>Version: JL10 - HA 1 TA 0 - 6.6.0.3 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <HL-DT-ST DVDRAM GSA-H10N >Version: JL10 - HA 1 TA 0 - 6.6.0.3 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : ATAPI DVD-ROM 16XMax atapi Port 0 ID 1 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-H10N atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === ATAPI DVD-ROM 16XMax D: CDRom0 HL-DT-ST DVDRAM GSA-H10N E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 113MB (116560kB) Memory in use : 77 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 11.4.2007 ISO compilation 7:21:12 μμ #1 Text 0 File Isodoc.cpp, Line 6168 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 7:21:12 μμ #2 Text 0 File Reader.cpp, Line 127 Reader running 7:21:12 μμ #3 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRAM GSA-H10N running 7:21:12 μμ #4 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 7:21:12 μμ #5 Text 0 File Burncd.cpp, Line 3151 Turn on Disc-at-once, using DVD media 7:21:12 μμ #6 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2283241 (507:23.16, 4459MB) 7:21:12 μμ #7 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 7:21:12 μμ #8 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: HL-DT-ST DVDRAM GSA-H10N, Media type: DVD+R Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4 Disc Application Code: 0, Extended Information Indicators: 7 7:21:12 μμ #9 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 7:21:12 μμ #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2283392 (2283392) = #2283392/507:25.17 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2283392 blocks [HL-DT-ST DVDRAM GSA-H10N] -------------------------------------------------------------- 7:21:12 μμ #11 Text 0 File ThreadedTransferInterface.cpp, Line 1040 Prepare recorder [HL-DT-ST DVDRAM GSA-H10N] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 381419520, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2283392 | lead-out | 1 | 0x41 | 0x00 7:21:12 μμ #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 7:21:12 μμ #13 Text 0 File Burncd.cpp, Line 4038 Cache writing successful. 7:21:12 μμ #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 7:21:12 μμ #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5.540 KB/s) 7:21:12 μμ #16 Text 0 File ThreadedTransferInterface.cpp, Line 2596 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 7:21:12 μμ #17 Text 0 File Cdrdrv.cpp, Line 8315 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: RICOHJPN Media type ID: R03 Product revision number: 4 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8 23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 7:21:12 μμ #18 Text 0 File DVDPlusRW.cpp, Line 608 Start write address at LBA 0 DVD high compatibility mode: Yes 7:21:29 μμ #19 SCSI -1135 File Cdrdrv.cpp, Line 1430 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03984000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10 0x35 0x2D 0x03 0x0E 0x0C 0x00 7:21:29 μμ #20 SCSI -1064 File Cdrdrv.cpp, Line 1430 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06070000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x21 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x10 0x2A 0x00 0x00 0x0E 0x21 0x02 7:21:29 μμ #21 CDR -1135 File Writer.cpp, Line 311 Write error HL-DT-ST DVDRAM GSA-H10N\H1 T0 7:21:29 μμ #22 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 7:21:30 μμ #23 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 7:22:13 μμ #24 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 7:22:14 μμ #25 SCSI -1135 File Cdrdrv.cpp, Line 1176 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10 0x35 0x2D 0x03 0x0E 0x0C 0x00 7:22:14 μμ #26 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 7:22:14 μμ #27 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5.540 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 4:02:46 πμ File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 2/11/2002 9:53:04 πμ File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4/8/2004 8:59:42 πμ (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 3:23:24 πμ ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 5:35:34 μμ Nero version: 6.6.0.3 (Nero Express) Recorder: <HL-DT-ST DVDRAM GSA-H10N>Version: JL10 - HA 1 TA 0 - 6.6.0.3 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <HL-DT-ST DVDRAM GSA-H10N >Version: JL10 - HA 1 TA 0 - 6.6.0.3 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : ATAPI DVD-ROM 16XMax atapi Port 0 ID 1 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-H10N atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === ATAPI DVD-ROM 16XMax D: CDRom0 HL-DT-ST DVDRAM GSA-H10N E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 99MB (102196kB) Memory in use : 80 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 12.4.2007 ISO compilation 9:17:46 πμ #1 Text 0 File Isodoc.cpp, Line 6168 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 9:17:46 πμ #2 Text 0 File Reader.cpp, Line 127 Reader running 9:17:46 πμ #3 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRAM GSA-H10N running 9:17:46 πμ #4 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 9:17:46 πμ #5 Text 0 File Burncd.cpp, Line 3151 Turn on Disc-at-once, using DVD media 9:17:46 πμ #6 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2283241 (507:23.16, 4459MB) 9:17:46 πμ #7 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 9:17:46 πμ #8 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: HL-DT-ST DVDRAM GSA-H10N, Media type: DVD+R Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4 Disc Application Code: 0, Extended Information Indicators: 7 9:17:46 πμ #9 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:17:46 πμ #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2283392 (2283392) = #2283392/507:25.17 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2283392 blocks [HL-DT-ST DVDRAM GSA-H10N] -------------------------------------------------------------- 9:17:46 πμ #11 Text 0 File ThreadedTransferInterface.cpp, Line 1040 Prepare recorder [HL-DT-ST DVDRAM GSA-H10N] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 381419520, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2283392 | lead-out | 1 | 0x41 | 0x00 9:17:46 πμ #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 9:17:46 πμ #13 Text 0 File Burncd.cpp, Line 4038 Cache writing successful. 9:17:46 πμ #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 9:17:46 πμ #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5.540 KB/s) 9:17:47 πμ #16 Text 0 File ThreadedTransferInterface.cpp, Line 2596 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 9:17:47 πμ #17 Text 0 File Cdrdrv.cpp, Line 8315 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: RICOHJPN Media type ID: R03 Product revision number: 4 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8 23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 9:17:47 πμ #18 Text 0 File DVDPlusRW.cpp, Line 608 Start write address at LBA 0 DVD high compatibility mode: Yes 9:32:02 πμ #19 Text 0 File WriterStatus.cpp, Line 116 <HL-DT-ST DVDRAM GSA-H10N > start writing Lead-Out at LBA 2283392 (22D780h), lenght 0 blocks 9:32:02 πμ #20 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 9:32:37 πμ #21 Phase 37 File dlgbrnst.cpp, Line 1832 Burn process completed successfully at 4x (5.540 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 4:02:46 πμ File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 2/11/2002 9:53:04 πμ File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4/8/2004 8:59:42 πμ (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ======
You have posted several logs so I will pick one of the failed burns and comment on it. First up you have your serial numbers appearing at the start of every log, I would suggest you edit them out before someone pirates them Update your Nero, both packages from here Package 1: http://www.dvdplusvideo.com/Nero-6.6.0.18_no_yt.exe Package 2: http://www.dvdplusvideo.com/NVE-3.1.0.21_no_yt.exe Update your firmware to JL12 from here http://lgodd.lge.com/fwdrv/DVD-WRITER/GSAH10N_JL12.exe You are using different brands of discs, NONE of them are good quality, try Verbatim or Sony (made in Japan) Burn your DVDs at 4X and your CDs at 32X I have also noticed that you have a lot of memory in use when burning....dont multitask while burning.