Need Keys?? Download Keymaster here.

Breck, I need your help. The link you had given, appears to have no available bins for Pansat 3000. I think mine is a clone one. Should I try the 2700 (clone), 2800 or the 3500?
Thanks.

 

You asked for a bin for the 2700, so that's what I gave you. Of course it wouldn't have a bin for the 3000.

You get what you ask for. Take the time to check that website. It's probably there.

 

You do not want to use a Pansat bin file on any clone unless it has been re-written and fixed for clone receivers. If you use the bin file as it was written for the true Pansats it will usually shut down your clone and you may need to jtag it. Try to find the bin fixed for clones.

Jerry

 

Hey guys do you know what the new keys are. I can't acess tvkeyz.com right now.

 

5F 9C C4 5B FB 7F 53 45
AF 5C CA AE 22 2C 81 09
D0 47 36 5D 5B F2 27 66
56 D0 96 C8 3F 85 AF D9

MAKE SURE U TURN AR OFF

 

Thanks

 

Here's another site for the keys:

http://dssftp.com/keys/main.php

 

I am looking in to buy a coolsat 5000 but it is being replaced with the 6000 will it be the set up as the 5000?

 

The setup is very similar between the 5000 and 6000 but in my opinion there are better brands of FTA receivers out there that you should look into. There always seems to be problems with the Coolsats while other units are still working. I'm not trying to sell you on any brand just trying to advise you on the situation. Look around at other brands and read as much as you can before you make a purchase.

Jerry

 

keymaster,tvkeyz and dssshowing old keys, any1 with updated DN keys for coolsat5k

 

please give me the new keys!
Breck, where are you my friend?
Thanks for all the helping info!
please get us the keyz, I can't find them anywhere yet!
Thx

 

Dish

8653EC831D5A2A632B2D95052D82BAFB
98BF0D27EFD7F9FE30D2803A118DAF9F

BEV

4D72C75938FE2D3F1D972E6468804E23
56D2D0C48ABC0DD0CAAB865F831A835F

 

HELLO .. I need help again, my dad's got a Viewsat 2000
and it's down, I have no idea how to get it up again.
How to enter keys?
Must be same keys as Dish that I saw on that site:
http://dssftp.com/keys/main.php
key0: 8653EC831D5A2A632B2D95052D82BAFB
key1: 98BF0D27EFD7F9FE30D2803A118DAF9F

But not sure how to insert them???
Can anybody help me..?

 

Breck,
Thank you so very much!!
you're the best man!!
Thx!

 

Viewsats:

Code:
1. Hit the “Menu” button.
2. Then scroll down to “Installation.” Hit the “OK” button.
F = Color / Slow on the 7000PVR
Delete = Guide

Viewsat Ultra Manual Key Entry

Code:
1. With unit on hit them MENU button on remote.
2. Scroll down to User Settings hit OK button on remote.
3. Enter in your Pin Code. Default is “0000”
4. Scroll down to Code Menu hit OK button on remote.
5. Scroll Right to Nagra.
6. Scroll Down
7. Scroll Left Dish 01 01 00 or OFF LIMITS 09 01 00
• These are the Keys needed to be changed. There are 2 Sets. They are 08 & 09 and 88 &
89.
8. Now depending on what key sets are to be changed. Usually displayed to you as
follows:
Key 00
Key 08 - 06 07 F0 E2 61 6F E1 45
Key 09 - 01 C5 FB 21 37 B6 C0 5E
Key 01
Key 88 - 06 07 F0 E2 61 6F E1 45
Key 89 - 01 C5 FB 21 37 B6 C0 5E
9. Using your remote Arrow Buttons to navigate to the specified key to be changed enter
in the new keys. Use the following to enter numbers and letters:
Numbers are 0-9.
Letter A is Button F1
Letter B is Button F2
Letter C is Button F3
Letter D is Button F4
Letter E is Button LAST CHANNEL
Letter F is Button TEXT
10. Once you have entered both lines need verify your entry and Hit the Exit Button.
11. You will then be prompted to save your information. Highlight Yes and hit OK
button on your remote.
12. Now just keep hitting the Exit button on remote till you get out of all menus and if
you have entered in the keys correctly you should now have picture back.
* Keys shown above are only an example.


Viewsat Xtreme

Code:
1. With unit on hit them MENU button on remote.
2. Scroll down to User Settings hit OK button on remote.
3. Now scroll down to “Code” and hit the “OK” button.
4. Next scroll down to “Nagra” and hit the “OK” button.
5. On the next screen, hit the left arrow to get to the key window for the provider
you need. Make sure you go to the second one of that provider. If you don’t see 5
lines of code (for Dish Net,) then you need to hit the left arrow again. Dish
Provider ID is “Dish Net 010100,” and OFF LIMITS Provider ID is “OFF LIMITS 090100.
6. Now skip the first line of code. Do not alter this line. (For Dish Net Only)
7. On the second line, it should start with 08. Using the right arrow, move to the next
set of digits. You will always want to leave the first 2 numbers there. They
identify the line.
8. Enter the first half of Key 86 (Key 00) into line 08.
9. Next enter the second half of Key 86 (Key 00) into line 09.
10. Then enter the first half of Key 96 (Key 01) into line 88.
11. Then enter the second half of Key 96 (Key 01) into line 89.
12. Remember, DO NOT ALTER THE FIRST 2 DIGITS OF ANY OF THESE
LINES. Start with the second set on each line.
13. Now hit the “Exit” button.
14. Highlight “Yes” and hit OK.
15. Exit out of the menu, and change the channel.
16. Watch TV.
Buttons may differ for some recs. Here are the buttons for the letters.
A = F1 (Red button)
B = F2 (Green button)
C = F3 (Yellow button)
D = F4 (Blue button)

E = Goback (bottom corner of the number pad) Rewind on the 7000PVR

 

wow. you're a genius.. THANKS!

 

Not a genius. You could find it on any FTA forum site if you take the time to read some.

 

CS6K new bin file is not rolling I<eys? Anyone with the same problem?

 

Are you using 149 bin?
Did you do a factory reset and scan for channels?
If not doing reset, you have to turn on manually.

 

breck with these new codes do i turn the autoroll off? and is the new bin out?