Need Keys?? Download Keymaster here.

You may start without the profanity,as there are other people that may be offended by it ,,this is a clean /safe site ,and there are many people willing to help,please be patient,,,,,,What are you using for a reciever

 

I have the keys available on the toolbar I created. You can download from the link at the bottom of this post.
On the toolbar, go to Links>Get Keys and you will find 7 sites that over the latest keys.

 

Jerry, did you find out any thing on the three headed monster?
Its kind of funny because i have most of the channels , im getting echo 7 and 8,10 i m trying to avoid messing with the dish , Im just trying to get MTV, espn ,A&E, bet

 

I haven't found a good answer that helps yet. But if you are getting Echo 7 and 8-10 then those channels should be there. Thats the 2 sats I use and I have those channels. I would try deleting all the channels and then rescan the sats or you could do a transponder scan just for the missing channels. Go to these links below which will give you the info you need for each channel and transponder.

http://www.lyngsat.com/packages/dish110.html
http://www.lyngsat.com/packages/dish119.html

First link is 8-10-----second one is 7.

Jerry

 

Yeah i tried deleting all and rescan , i also tried tp scan , still the same channels.,i have a total of 200 channels . do that seem about right or am i missing quite a few?

 

That sounds more like 1 sat. If I rescan both sats I end up with over 600 channels, some are duplicates but you should have at least twice that many. Try changing your LNB type to either Legacy or Dishpro (DP) if they are listed and then rescan. That 3 head has to have an internal switch so maybe one of those 2 settings will pick up more channels. Standard LNB setting would be for 2 single LNBs. It may not work exactly right but it could get you more channels hopefully. Leave the 22khz in the on position.

Jerry

 

What does it mean when you are scanning sats and to the far right on the lower half of the screen it says locked on some < could that be telling me something

 

Any one getting ,, NO or BAD SIGNAL,, on COOLSAT 6000 PREM,,,Been working fine ,,came back from store and am getting no signal sense about 6pm,,it was two dark to check the DISH on my roof out,,had it over a year,,but this is a first for that,,cant see any over cast,,its been NO OR BAD SIGNAL mode over 6 hours,,,any suggestions,,,on my roof is DISH NETWORK 500 dish with two LNBs,,,119 and 110,,,I have re scanned for 110 and 119 ,with no luck,,,even the PPV GUIDE does not come in that always worked even with BIN down,,,every thing says ,,NO INFORMATION ,,on all channels,,,thanx for any help or suggestions

 

I had that with bin 162 - I reloaded 100 and then 162 and rescanned and everything came back.

 

thanx BRECK ,, i will give it a shot this eve,,i dont even feel up to it this morning,,got the flu bad,, thank you for info,,i will post this evening of any changes

 

BRECK,,,you were right,, i reloaded a few older BINS ,, then reloaded BIN 163 ,, Works just fine,,before i done all of that ,,it was like it had reset it self,,there was no signal,,and no information ,,all the info, boxes were blank ,,, any idea what may of caused it

 

Dunno - I am in the same boat. Been in bed for almost 3 days now with a bug. Never got out of bed yesterday.

 

hope you get feeling better

 

Just went out on the snowblower and did the driveway. Parts were anywhere from 12 inches to 24 inches deep in spots. Retarded snow fall yesterday. Burnt out now and going to hit the couch for a nap. LOL

 

yea,,i just came back in from picking tangerines off my tree in my back yard,,got a few pink grapefruit also,,its the winter crop,,you must be pretty far north to still be getting snow,,,its 78 degrees here in FL,,,I wish we could get a cold snap here to kill the mosquetos,, and every other airborne alergies

 

Must be nice. I think I have about 3 feet of snow in my front yard.

 

Im back, I put up a dish500 with a dishpro + but i cant aim the dish,
everytime i connect the cable to my viewsat and try to power it back up it does not come on , there is just a red light in the back that flashes, but when i disconnect the cable from the lnb it powers back up as normal, I have the cable from the lnb straight to the box
does this sound like a problem with the lnb or my viewsat ultra is having problems , or something else. please help...

 

Is that the only dish hooked up or do you have a second hooked up also?

 

thats the only thing hooked up right now, i do have both ports with cables on them but there is only one connected to the receiver, the reson for both is i was planning on adding another dish to the lnb in port also ,later

 

I am not the greatest help with this. Not my thing LOL.
Can't be anything to do with your receiver settings. Generally you would hook it all up first and then do the settings.
This is just a guess, but if the LNB requires power, in your receiver setup somewhere I beleive you can turn LNB power on or off. Maybe change that setting and try it again. If it's already on, turn it off and try it. My best guess.