1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Nero (6.0.0.28) DVD Burn Failure. -RW burns OK +R do not !?

Discussion in 'Nero discussion' started by FCA1975, Jul 9, 2006.

Page 2 of 2
  1. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,589
    Likes Received:
    1
    Trophy Points:
    116
    Hi FCA1975
    You have the different channels for the different drive connections. Like ide can hold 2 drives on the cable per port. Your hard drive is on 1 and the dvd/cd drives on the other.
    So your burner keeps slipping into PIO mode which I think may be playing into your problem along w/ the CMC media. This pc burner's doesn't look like it likes CMC media .
    Now the much older pc may only support PIO mode (older transfer mode) and since all drives at in the mode they are using the same transfer rate.
    Probably takes awhile on this older pc. Using PIO & DMA can cause problems burning. Best to keep the transfer mode the same.

    Check the connections on this drive (ide to drive & mobo, power connetion) - may want to swap it w/ the cd drive to see if the problem is w/ the connectors. Switch the jumper pins on both drives if you do.

    Can virus cause problems - yep all kinds of wacky stuff.
    So run these if you haven't got rid of them run - adaware & spybot.
    Another good online scanner that is good for getting rid of this is house call:
    http://housecall.trendmicro.com/
     
    binkie7, Sep 17, 2006
    #21
  2. my2222

    my2222 Guest

    Hi Binkie7, I was searching for an answer to my question of 'I can burn on dvd+rw and not DVD+r', and found your 'conversations'.

    From your advice in regards to updating the Nero to a newer 6.0 version. I have an even older Nero version, 6.0.0.0. So it seems I need to use that link you have provided to update my Nero.

    I would like to understand why all of a sudden I need to update my Nero or the firmware to burn a DVD. I have used the same software (DVD Shrink and Nero) for the last two years. My burns is not as fluid as before......is it the way the movie's files are being compiled together that requires newer and upgraded versions of DVD Shrink, Nero, and firmware?

    The next thing is, why I rec'vd burn error from Nero two times in a row on two different Sony DVD+R, and then I put in a Memorex DVD+RW I can burn the movie with immediate success!!? I have compared the burn logs and this is what I noticed:
    1. 'Burn process started at 4x (5,520 KB/s)' for the DVD+R, and 'Burn process started at 2.4x (3,312KB/s) for the DVD+RW

    2. For the failed burn the log has these extra entries -
    5:27:22 PM #24 SCSI -1135 File Cdrdrv.cpp, Line 1361
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04180000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x80
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
    0x00 0x00 0x00 0x00 0x0C 0x80

    5:27:22 PM #25 CDR -1135 File Writer.cpp, Line 335
    Write error

    5:27:22 PM #26 Text 0 File ThreadedTransfer.cpp, Line 227
    all writers idle, stopping conversion

    5:27:23 PM #27 Text 0 File ThreadedTransfer.cpp, Line 221
    conversion idle, stopping reader

    5:27:23 PM #28 Phase 127 File dlgbrnst.cpp, Line 1818
    Generating DVD high compatibility borders

    5:27:23 PM #29 Text 0 File dlgbrnst.cpp, Line 1678
    Set remaining time: 0:00,000 (0ms) -> OK

    5:27:23 PM #30 Phase 129 File dlgbrnst.cpp, Line 1818
    Generating DVD borders completed successfully

    5:27:23 PM #31 Text 0 File dlgbrnst.cpp, Line 1678
    Set remaining time: 0:00,000 (0ms) -> OK

    5:27:23 PM #32 Phase 38 File dlgbrnst.cpp, Line 1818
    Burn process failed at 4x (5,520 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
    File 'Drivers\PXHELP20.SYS': Ver=2.02.57a, size=17168 bytes, created 7/30/2003 3:02:00 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 3/31/2003 3:00:00 PM (Adapter driver for rec)
    File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 8/22/2004 4:31:48 PM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    This is my DVD burner info
    === Scsi-Device-Map ===
    DiskPeripheral : TOSHIBA MK6021GAS atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: ?
    =======================
     
    my2222, Sep 17, 2006
    #22
  3. ZippyDSM

    ZippyDSM Active member

    Joined:
    Aug 3, 2005
    Messages:
    1,723
    Likes Received:
    0
    Trophy Points:
    66
    my2222
    it could be a few thigns
    1.the DVD drive is going but I doubt it
    2.the ramm is going but I doubt it
    2.the media you are using is just icky and refuses to burn right,you need see what the REAL media is by using Nero CD/DVD speed.


    need to have CD/DVD speed do a disc info check and post the MID and manufators name,list all the DVDs ou are useing you do not ahve to burn anyhtign to the disc just can them in order to get the info.
     
    ZippyDSM, Sep 17, 2006
    #23
  4. gwendolin

    gwendolin Senior member

    Joined:
    Jun 29, 2005
    Messages:
    7,447
    Likes Received:
    0
    Trophy Points:
    116
    @my2222, Post your FULL log thanks
     
    gwendolin, Sep 17, 2006
    #24
  5. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,589
    Likes Received:
    1
    Trophy Points:
    116
    Hi my2222
    Here's some answers to your questions:
    why all of a sudden I need to update my Nero or the firmware to burn a DVD
    Updates of Nero or any program help resolve bugs the program has. Also there are sometimes improvements. So update Nero to 6.6.0.18.

    Now firmware updates help the drive w/ media. One thing it does is program new media codes in the drive 'memory'. This helps the drive recognize new media on the market and use the correct write strategy.

    why I rec'vd burn error from Nero two times in a row on two different Sony DVD+R, and then I put in a Memorex DVD+RW I can burn the movie with immediate success!!?
    Well RW media has pretty much not changed - no higher burns etc unlike -/+ media which has increased burn speeds and newer ones on the market. This is where updated firmware can help.

    Now for your burner - it's a bit older - only writes to +R at 4x, 2.4x for +RW. The last firmware update was 10/04 so newer media may give it a problem. 16x probably will. Probably why the RW is working but not the +R Sony's. The last firmware version is C111 (guess you have a dell pc). Here's a link to update:
    http://forum.rpc1.org/dl_firmware.php?download_id=1931
    For this drive try and use 8x or under rated media.

    s it the way the movie's files are being compiled together that requires newer and upgraded versions of DVD Shrink
    Shrink hasn't been updated in over 2 year so (unrelated to your burning issue) to rip the newer movies you'll need to have AnyDVD running in the background (has a free 21 day trial) or rip 1st with DVDFab Decrypter (free)

    You can post your log like gwen suggested - probably best to start a new thread in Nero for it.
     
    binkie7, Sep 17, 2006
    #25
Page 2 of 2

Share This Page