I have been using dvd shrink and dvd decrypter for a while now and as soon as I installed nero 7 all of my burns turn into coasters. I don't drink that much. Is there any other software that conflicts with Nero 7. Also now I am having a problem just writing simple files to my cd-r. I uninstalled Nero and then tried another burn and it came out better. Atleast it was readable. But I forgot that I decrypted the files while Nero 7 was still installed. I need some help.My firmware is up to date and drivers as well. Dvd Software installed: Dvd Fab,,,,,,crap Dvd decrypter,,,,,,,,,never a problem Dvd shrink,,,,,,,,,,,," " Nero 7 Amd 1800 xp win xp 512 ram 60 gig hard Liteon sohw-1633s MEDIA IS GOOD Allready went through that @#$&
Well I just got Nero 7 ... hope will find time to get it installed and tested. With Nero a common problem is caused when you install InCD. Did you install that?
na i did not install that. I just uninstalled nero total wipe and installed the updated version. Then this time I did install incd cause i thought that might have caused something so we will see.
James Hanna J.A. Hanna Renovations Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/14/2002 3:03:36 PM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 7.0.1.2 Internal Version: 7, 0, 1, 2 (Nero Express) Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 7.0.1.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 1 TA 1 - 7.0.1.2 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y060L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : SONY DVD RW DRU-530A atapi Port 1 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 1 DMA: On CdRomPeripheral : Generic DVD-ROM 1.0 gxc122p Port 2 ID 0 DMA: Off === CDRom-Device-Map === Generic DVD-ROM E: CDRom1 LITE-ON DVDRW SOHW-1633S F: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 85MB (87780kB) Memory in use : 83 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 12.11.2005 Burn DVD Image 11:15:38 PM #1 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 72704KB of Memory 11:15:38 PM #2 Text 0 File Reader.cpp, Line 124 Reader running 11:15:38 PM #3 Text 0 File Writer.cpp, Line 113 Writer F: LITE-ON DVDRW SOHW-1633S running 11:15:38 PM #4 Text 0 File Burncd.cpp, Line 3302 Turn on Disc-At-Once, using DVD media 11:15:38 PM #5 Text 0 File DlgWaitCD.cpp, Line 279 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2234798 (496:37.23, 4364MB) 11:15:38 PM #6 Text 0 File DlgWaitCD.cpp, Line 291 Write in overburning mode: NO (enabled: CD) 11:15:38 PM #7 Text 0 File DlgWaitCD.cpp, Line 2578 Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+R Disc Manufacturer ID: RITEK, Media Type ID: R03, Product revision number: 2 Disc Application Code: 0, Extended Information Indicators: 3 11:15:38 PM #8 Text 0 File DlgWaitCD.cpp, Line 458 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:15:38 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 2234799 (2234799) = #2234799/496:37.24 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2234799 blocks [F: LITE-ON DVDRW SOHW-1633S] -------------------------------------------------------------- 11:15:38 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [F: LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4576868352, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2234799 | lead-out | 1 | 0x41 | 0x00 11:15:38 PM #11 Text 0 File SCSIPassThrough.cpp, Line 36 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 11:15:38 PM #12 Phase 36 File dlgbrnst.cpp, Line 1725 Burn process started at 4x (5,540 KB/s) 11:15:38 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 11:15:38 PM #14 Text 0 File Cdrdrv.cpp, Line 8411 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: RITEK... Media type ID: R03 Product revision number: 2 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 52 49 54 45 4B - 00 00 00 52 30 33 02 38 ...RITEK...R03.8 23 54 37 20 00 5D 6C 00 - B2 67 15 15 0B 0B 08 08 #T7..]l..g...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 11:15:38 PM #15 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: Yes 11:29:38 PM #16 Text 0 File WriterStatus.cpp, Line 116 <F: LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 2234799 (2219AFh), length 0 blocks 11:29:38 PM #17 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:29:57 PM #18 SPTI -1176 File SCSIPassThrough.cpp, Line 323 F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x72 Sense Qual: 0x02 CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 72 02 Buffer x03cc0c00: Len x20 11:29:57 PM #19 CDR -1176 File ThreadedTransferInterface.cpp, Line 1937 Session fixation error F: LITE-ON DVDRW SOHW-1633S 11:29:57 PM #20 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1937 Could not perform end of Disc-at-once 11:30:15 PM #21 SPTI -1176 File SCSIPassThrough.cpp, Line 323 F: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x72 Sense Qual: 0x02 CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 72 02 Buffer x03cc0c00: Len x20 11:30:15 PM #22 Phase 127 File dlgbrnst.cpp, Line 1725 Generating DVD high compatibility borders 11:30:15 PM #23 Phase 129 File dlgbrnst.cpp, Line 1725 Generating DVD borders completed successfully 11:30:15 PM #24 Phase 38 File dlgbrnst.cpp, Line 1725 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 3:03:36 PM File 'Drivers\InCDfs.SYS': Ver=5, 0, 0, 4, size=101760 bytes, created 10/14/2005 12:00:36 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=5, 0, 0, 4, size=29440 bytes, created 10/14/2005 12:01:56 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=5, 0, 0, 4, size=8704 bytes, created 10/14/2005 12:00:32 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/4/2004 12:59:41 AM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
- as your burner is internal to the PC, that question mark is saying your ATAPI drivers still aren't loaded correctly, try to fix via this - http://home.comcast.net/~bbmayo/FAQ.htm - wow where's all your free memory gone ?. 512MB is sufficient total memory but something's pinched it all. you need to close down more programs prior to dvd work/burning to free up more memory - follow other suggestions - InCD is Nero's horrid 'packet writing software', uninstall Nero then uninstall completely via Nero's Clean Tools, then reinstall Nero WITHOUT installing InCD ie as per flip218's reply, uninstall InCD.. Also, the ATAPI drivers are supposed to be listed in this section, that'll be fixed by fixing the DMA settings as per further up my reply
well i downloaded the aspi thing but I am confused on the installation. It says to open the install.bat but wants to specify what os it is for. xp32 for PENTIUM 1\2\3\4 and xp64 for Itanium. Whitch one should I use for the command since I am using a amd xp 1800. That is not on the list.
go here and get forceASPI 1.8 http://force_aspi_18.w.interia.pl/ run killaspi, then instapsi ... then reboot.
from that same link get aspi check. check to see if your aspi was changed after the nero install. If it was just re-run forceaspi again.
Ok now Nero is burning but I am getting a bad burn with it. I burn at 4x so it is not like I am burning to fast. I went throught the movie and found where it was skipping and then went to the file to see if it skipped on the file and it doesent. Which tells me that it is the burn not the rip. Now what do I do to fix that. I was burning fine for a long time so I would love to fix this problem. Please help .
I thought that there was only a log if there was an error. Because The burn completes but at bad quality. Where do I find the log if there is one?
All burns, good and bad, are appended to c:\program files\ahead\nero\nerohistory.log. It must automatically housekeep itself as its cleared down now and then..
This was the latest burn but i forced aspi and it still has a question mark. Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 11/13/2005 10:08:35 PM ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero API version: 7.0.1.2 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\Nero - Burning Rom Internal Version: 7, 0, 1, 2 Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 1 - 7.0.1.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y060L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : SONY DVD RW DRU-530A atapi Port 1 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 1 DMA: On CdRomPeripheral : Generic DVD-ROM 1.0 gxc122p Port 2 ID 0 DMA: Off === CDRom-Device-Map === SONY DVD RW DRU-530A D: CDRom0 Generic DVD-ROM E: CDRom2 LITE-ON DVDRW SOHW-1633S F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 237MB (242880kB) Memory in use : 53 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 16.11.2005 NeroAPI 2:52:58 PM #1 Phase 112 File APIProgress.cpp, Line 278 DVD-Video files reallocation started 2:52:58 PM #2 Phase 114 File APIProgress.cpp, Line 278 DVD-Video files reallocation completed (no file modified) 2:52:58 PM #3 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 2:52:58 PM #4 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 72704KB of Memory 2:52:58 PM #5 Text 0 File Reader.cpp, Line 124 Reader running 2:52:58 PM #6 Text 0 File Writer.cpp, Line 113 Writer F: LITE-ON DVDRW SOHW-1633S running 2:52:58 PM #7 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 2:52:58 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 2:52:58 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 2:52:58 PM #10 Text 0 File Burncd.cpp, Line 3302 Turn on Disc-At-Once, using DVD media 2:52:58 PM #11 Text 0 File DlgWaitCD.cpp, Line 279 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1963087 (436:14.37, 3834MB) 2:52:58 PM #12 Text 0 File DlgWaitCD.cpp, Line 291 Write in overburning mode: NO 2:52:58 PM #13 Text 0 File DlgWaitCD.cpp, Line 2578 Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+R Disc Manufacturer ID: RITEK, Media Type ID: R03, Product revision number: 2 Disc Application Code: 0, Extended Information Indicators: 3 2:52:58 PM #14 Text 0 File DlgWaitCD.cpp, Line 458 >>> Protocol of DlgWaitCD activities: <<< ========================================= 2:52:58 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1963088 (1963088) = #1963088/436:14.38 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1963088 blocks [F: LITE-ON DVDRW SOHW-1633S] -------------------------------------------------------------- 2:52:58 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [F: LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4020404224, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1963088 | lead-out | 1 | 0x41 | 0x00 2:52:58 PM #17 Text 0 File SCSIPassThrough.cpp, Line 36 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 2:52:58 PM #18 Phase 24 File APIProgress.cpp, Line 278 Caching of files started 2:52:58 PM #19 Text 0 File Burncd.cpp, Line 4132 Cache writing successful. 2:52:58 PM #20 Phase 25 File APIProgress.cpp, Line 278 Caching of files completed 2:52:58 PM #21 Phase 36 File APIProgress.cpp, Line 278 Burn process started at 4x (5,540 KB/s) 2:52:59 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 2:52:59 PM #23 Text 0 File Cdrdrv.cpp, Line 8411 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: RITEK... Media type ID: R03 Product revision number: 2 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 52 49 54 45 4B - 00 00 00 52 30 33 02 38 ...RITEK...R03.8 23 54 37 20 00 5D 6C 00 - B2 67 15 15 0B 0B 08 08 #T7..]l..g...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 2:52:59 PM #24 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: Yes 3:05:21 PM #25 Text 0 File WriterStatus.cpp, Line 116 <F: LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 1963088 (1DF450h), length 0 blocks 3:05:21 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 3:05:45 PM #27 Phase 37 File APIProgress.cpp, Line 278 Burn process completed successfully at 4x (5,540 KB/s) 3:05:46 PM #28 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 3:05:46 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 11/13/2005 10:08:35 PM Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
hi, you're almost there now, the question mark is there still and the atapi drivers still aren't loaded correctly - try redoing the DMA fix..
well I did the force aspi angain (uninstall.bat then install.bat) and did a fake burn to get a log and it still came up with the question mark. Is there a conflict when the two burners are on atapi port 1?
Just to be sure ... You downloaded forceASPI 1.8 and ASPI check from here: http://force_aspi_18.w.interia.pl/ And you ran killaspi then instaspi.
