1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Nero brurning problem after upgrade pls HELP!

Discussion in 'Nero discussion' started by pw-pro, Jul 7, 2005.

  1. pw-pro

    pw-pro Guest

    After upgrading to NERO 6.6.0.14 I suddenly van not burn DVD's.
    At the end of the buring process i get a message saying something like cant burn end-of dik at once!...

    Anybody can help? What can I do? After searching for clues everywhere i finally found this forum and am in the hope somebody canhelp me here.
    The log-file is like Chinese for me-and I only speak german, portuguese and some english!

    Thanks in advance
    Peter

    Log in the following:
    ---------
    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\2\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
    Nero Version: 6.6.0.14
    Internal Version: 6, 6, 0, 14d

    Recorder: <HL-DT-ST DVDRAM GSA-4040B>Version: A300 - HA 1 TA 1 - 6.6.0.14
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 3 TA 0 - 6.6.0.14
    Adapter driver: <a347scsi> HA 3

    === Scsi-Device-Map ===
    DiskPeripheral : FUJITSU MPF3204AT atapi Port 0 ID 0 DMA: On
    DiskPeripheral : F J T U M F 2 4 T atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8160B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4040B atapi Port 1 ID 1 DMA: On
    DiskPeripheral : iomega jaz 1GB J.86 symc810 Port 2 ID 4 DMA: Off
    DiskPeripheral : QUANTUM FIREBALL ST4.3S 0F0C symc810 Port 2 ID 6 DMA: Off
    CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8160B D: CDRom0
    HL-DT-ST DVDRAM GSA-4040B E: CDRom1
    AXV CD/DVD-ROM I: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 70254592 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 479MB (490992kB)
    Free physical memory: 164MB (168420kB)
    Memory in use : 65
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    4.7.2005
    ISO compilation
    18:15:00 #1 Text 0 File Isodoc.cpp, Line 6314
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 2 (Max. of 31 chars)
    Character set : ASCII
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : FALSE

    18:15:00 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    18:15:00 #3 Text 0 File Writer.cpp, Line 122
    Writer HL-DT-ST DVDRAM GSA-4040B running

    18:15:00 #4 ISO9660GEN -11 File geniso.cpp, Line 3297
    First writeable address = 0 (0x00000000)

    18:15:01 #5 Text 0 File Burncd.cpp, Line 3230
    Turn on Disc-At-Once, using DVD media

    18:15:02 #6 Text 0 File DlgWaitCD.cpp, Line 267
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2243791 (498:37.16, 4382MB)

    18:15:02 #7 Text 0 File DlgWaitCD.cpp, Line 279
    Write in overburning mode: NO (enabled: CD)

    18:15:02 #8 Text 0 File DlgWaitCD.cpp, Line 2433
    Recorder: HL-DT-ST DVDRAM GSA-4040B, Media type: DVD-R
    Disc Manufacturer: -
    Disc Application Code: 64, Disc Physical Code: 193

    18:15:02 #9 Text 0 File DlgWaitCD.cpp, Line 445
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    18:15:02 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2243792 (2243792) = #2243792/498:37.17
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2243792 blocks [HL-DT-ST DVDRAM GSA-4040B]
    --------------------------------------------------------------

    18:15:02 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [HL-DT-ST DVDRAM GSA-4040B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4595286016, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2243792 | lead-out | 1 | 0x41 | 0x00

    18:15:02 #12 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    18:15:03 #13 Text 0 File Burncd.cpp, Line 4114
    Cache writing successful.

    18:15:03 #14 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    18:15:03 #15 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 2x (2,770 KB/s)

    18:15:03 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    18:15:03 #17 Text 0 File DVDR.cpp, Line 2316
    Recording mode: Sequential Recording Mode

    18:15:03 #18 Text 0 File Mmc.cpp, Line 21592
    Set BUFE: Buffer underrun protection -> ON

    18:15:03 #19 Text 0 File DVDR.cpp, Line 2470
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    18:15:03 #20 Text 0 File Cdrdrv.cpp, Line 8821
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    18:15:20 #21 SCSI -1135 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03580000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x10
    0x32 0x4D 0x03 0x0C 0x0C 0x00

    18:15:20 #22 CDR -1135 File Writer.cpp, Line 311
    Write error

    18:15:20 #23 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    18:15:20 #24 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    18:15:20 #25 Text 0 File DVDR.cpp, Line 2708
    EndDAO: Last written address was -1

    18:15:20 #26 CDR -1135 File WriterStatus.cpp, Line 167
    Write error

    18:15:20 #27 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    18:15:20 #28 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 2x (2,770 KB/s)


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 29/08/2002 01:27:50 (Adapter driver for rec)
    File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 30/04/2004 09:33:00 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    Peter Winter
    SkyWatch, Lda.
    1A23-0064-4034-7458-3045-5959

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\2\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
    Nero Version: 6.6.0.14
    Internal Version: 6, 6, 0, 14d

    Recorder: <HL-DT-ST DVDRAM GSA-4040B>Version: A300 - HA 1 TA 1 - 6.6.0.14
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 3 TA 0 - 6.6.0.14
    Adapter driver: <a347scsi> HA 3

    === Scsi-Device-Map ===
    DiskPeripheral : FUJITSU MPF3204AT atapi Port 0 ID 0 DMA: On
    DiskPeripheral : F J T U M F 2 4 T atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8160B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4040B atapi Port 1 ID 1 DMA: On
    DiskPeripheral : iomega jaz 1GB J.86 symc810 Port 2 ID 4 DMA: Off
    DiskPeripheral : QUANTUM FIREBALL ST4.3S 0F0C symc810 Port 2 ID 6 DMA: Off
    CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8160B D: CDRom0
    HL-DT-ST DVDRAM GSA-4040B E: CDRom1
    AXV CD/DVD-ROM I: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 70254592 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 479MB (490992kB)
    Free physical memory: 123MB (126588kB)
    Memory in use : 74
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    6.7.2005
    ISO compilation
    13:50:46 #1 Text 0 File Isodoc.cpp, Line 6314
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : TRUE
    Write : FALSE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 2 (Max. of 31 chars)
    Character set : ASCII
    Joliet :FALSE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    13:50:47 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    13:50:47 #3 Text 0 File Writer.cpp, Line 122
    Writer HL-DT-ST DVDRAM GSA-4040B running

    13:50:47 #4 ISO9660GEN -11 File geniso.cpp, Line 3297
    First writeable address = 0 (0x00000000)

    13:50:48 #5 Text 0 File Burncd.cpp, Line 3230
    Turn on Disc-At-Once, using DVD media

    13:50:52 #6 Text 0 File DlgWaitCD.cpp, Line 267
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2243759 (498:36.59, 4382MB)

    13:50:52 #7 Text 0 File DlgWaitCD.cpp, Line 279
    Write in overburning mode: NO (enabled: CD)

    13:50:52 #8 Text 0 File DlgWaitCD.cpp, Line 2433
    Recorder: HL-DT-ST DVDRAM GSA-4040B, Media type: DVD-R
    Disc Manufacturer: -
    Disc Application Code: 64, Disc Physical Code: 193

    13:50:52 #9 Text 0 File DlgWaitCD.cpp, Line 445
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    13:50:52 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2243760 (2243760) = #2243760/498:36.60
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2243760 blocks [HL-DT-ST DVDRAM GSA-4040B]
    --------------------------------------------------------------

    13:50:52 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [HL-DT-ST DVDRAM GSA-4040B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4595220480, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2243760 | lead-out | 1 | 0x41 | 0x00

    13:50:53 #12 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    13:50:55 #13 Text 0 File Burncd.cpp, Line 4114
    Cache writing successful.

    13:50:55 #14 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    13:50:55 #15 Phase 32 File dlgbrnst.cpp, Line 1832
    Simulation started at 2x (2,770 KB/s)

    13:50:55 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    13:50:56 #17 Text 0 File DVDR.cpp, Line 2316
    Recording mode: Sequential Recording Mode

    13:50:56 #18 Text 0 File Mmc.cpp, Line 21592
    Set BUFE: Buffer underrun protection -> ON

    13:50:56 #19 Text 0 File DVDR.cpp, Line 2470
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    13:50:56 #20 Text 0 File Cdrdrv.cpp, Line 8821
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    13:51:01 #21 Text 0 File Cdrdrv.cpp, Line 1288
    13:51:01.862 - HL-DT-ST DVDRAM GSA-4040B\H1 T1 : Queue again later

    14:19:17 #22 Text 0 File WriterStatus.cpp, Line 116
    <HL-DT-ST DVDRAM GSA-4040B> start writing Lead-Out at LBA 2243760 (223CB0h), lenght 0 blocks

    14:19:17 #23 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    14:19:17 #24 Text 0 File DVDR.cpp, Line 2708
    EndDAO: Last written address was 2243759

    14:19:39 #25 SCSI -1093 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03614C00
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x02
    Sense Qual: 0x00
    CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
    0x30 0x3C 0x00 0x0C 0x02 0x00

    14:19:39 #26 CDR -1093 File ThreadedTransferInterface.cpp, Line 1901
    No seek complete

    14:19:39 #27 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1901
    Could not perform end of Disc-at-once

    14:19:39 #28 Text 0 File DVDR.cpp, Line 2708
    EndDAO: Last written address was -1

    14:19:39 #29 CDR -201 File WriterStatus.cpp, Line 167
    Invalid write state
    HL-DT-ST DVDRAM GSA-4040B\H1 T1

    14:19:39 #30 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    14:19:40 #31 Phase 34 File dlgbrnst.cpp, Line 1832
    Simulation failed at 2x (2,770 KB/s)


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 29/08/2002 01:27:50 (Adapter driver for rec)
    File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 30/04/2004 09:33:00 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    Peter Winter
    SkyWatch, Lda.
    1A23-0064-4034-7458-3045-5959

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\2\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
    Nero Version: 6.6.0.14
    Internal Version: 6, 6, 0, 14d

    Recorder: <HL-DT-ST DVDRAM GSA-4040B>Version: A300 - HA 1 TA 1 - 6.6.0.14
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 3 TA 0 - 6.6.0.14
    Adapter driver: <a347scsi> HA 3

    === Scsi-Device-Map ===
    DiskPeripheral : FUJITSU MPF3204AT atapi Port 0 ID 0 DMA: On
    DiskPeripheral : F J T U M F 2 4 T atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8160B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4040B atapi Port 1 ID 1 DMA: On
    DiskPeripheral : iomega jaz 1GB J.86 symc810 Port 2 ID 4 DMA: Off
    DiskPeripheral : QUANTUM FIREBALL ST4.3S 0F0C symc810 Port 2 ID 6 DMA: Off
    CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8160B D: CDRom0
    HL-DT-ST DVDRAM GSA-4040B E: CDRom1
    AXV CD/DVD-ROM I: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 70254592 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 479MB (490992kB)
    Free physical memory: 153MB (156984kB)
    Memory in use : 68
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    6.7.2005
    ISO compilation
    14:21:24 #1 Text 0 File Isodoc.cpp, Line 6314
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : TRUE
    Write : FALSE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 2 (Max. of 31 chars)
    Character set : ASCII
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    14:21:24 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    14:21:24 #3 Text 0 File Writer.cpp, Line 122
    Writer HL-DT-ST DVDRAM GSA-4040B running

    14:21:24 #4 ISO9660GEN -11 File geniso.cpp, Line 3297
    First writeable address = 0 (0x00000000)

    14:21:25 #5 Text 0 File Burncd.cpp, Line 3230
    Turn on Disc-At-Once, using DVD media

    14:21:25 #6 Text 0 File DlgWaitCD.cpp, Line 267
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2243791 (498:37.16, 4382MB)

    14:21:25 #7 Text 0 File DlgWaitCD.cpp, Line 279
    Write in overburning mode: NO (enabled: CD)

    14:21:25 #8 Text 0 File DlgWaitCD.cpp, Line 2433
    Recorder: HL-DT-ST DVDRAM GSA-4040B, Media type: DVD-R
    Disc Manufacturer: -
    Disc Application Code: 64, Disc Physical Code: 193

    14:21:25 #9 Text 0 File DlgWaitCD.cpp, Line 445
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    14:21:25 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2243792 (2243792) = #2243792/498:37.17
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2243792 blocks [HL-DT-ST DVDRAM GSA-4040B]
    --------------------------------------------------------------

    14:21:25 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [HL-DT-ST DVDRAM GSA-4040B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4595286016, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2243792 | lead-out | 1 | 0x41 | 0x00

    14:21:25 #12 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    14:21:27 #13 Text 0 File Burncd.cpp, Line 4114
    Cache writing successful.

    14:21:27 #14 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    14:21:27 #15 Phase 32 File dlgbrnst.cpp, Line 1832
    Simulation started at 2x (2,770 KB/s)

    14:21:27 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    14:21:27 #17 Text 0 File DVDR.cpp, Line 2316
    Recording mode: Sequential Recording Mode

    14:21:27 #18 Text 0 File Mmc.cpp, Line 21592
    Set BUFE: Buffer underrun protection -> ON

    14:21:27 #19 Text 0 File DVDR.cpp, Line 2470
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    14:21:27 #20 Text 0 File Cdrdrv.cpp, Line 8821
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    14:21:32 #21 Text 0 File Cdrdrv.cpp, Line 1288
    14:21:32.876 - HL-DT-ST DVDRAM GSA-4040B\H1 T1 : Queue again later

    14:49:49 #22 Text 0 File WriterStatus.cpp, Line 116
    <HL-DT-ST DVDRAM GSA-4040B> start writing Lead-Out at LBA 2243792 (223CD0h), lenght 0 blocks

    14:49:49 #23 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    14:49:49 #24 Text 0 File DVDR.cpp, Line 2708
    EndDAO: Last written address was 2243791

    14:50:25 #25 Phase 33 File dlgbrnst.cpp, Line 1832
    Simulation completed successfully at 2x (2,770 KB/s)


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 29/08/2002 01:27:50 (Adapter driver for rec)
    File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 30/04/2004 09:33:00 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    Peter Winter
    SkyWatch, Lda.
    1A23-0064-4034-7458-3045-5959

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\2\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
    Nero Version: 6.6.0.14
    Internal Version: 6, 6, 0, 14d

    Recorder: <HL-DT-ST DVDRAM GSA-4040B>Version: A300 - HA 1 TA 1 - 6.6.0.14
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 3 TA 0 - 6.6.0.14
    Adapter driver: <a347scsi> HA 3

    === Scsi-Device-Map ===
    DiskPeripheral : FUJITSU MPF3204AT atapi Port 0 ID 0 DMA: On
    DiskPeripheral : F J T U M F 2 4 T atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8160B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4040B atapi Port 1 ID 1 DMA: On
    DiskPeripheral : iomega jaz 1GB J.86 symc810 Port 2 ID 4 DMA: Off
    DiskPeripheral : QUANTUM FIREBALL ST4.3S 0F0C symc810 Port 2 ID 6 DMA: Off
    CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8160B D: CDRom0
    HL-DT-ST DVDRAM GSA-4040B E: CDRom1
    AXV CD/DVD-ROM I: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 70254592 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 479MB (490992kB)
    Free physical memory: 169MB (173156kB)
    Memory in use : 64
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    6.7.2005
    ISO compilation
    14:51:47 #1 Text 0 File Isodoc.cpp, Line 6314
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 2 (Max. of 31 chars)
    Character set : ASCII
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    14:51:47 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    14:51:47 #3 Text 0 File Writer.cpp, Line 122
    Writer HL-DT-ST DVDRAM GSA-4040B running

    14:51:47 #4 ISO9660GEN -11 File geniso.cpp, Line 3297
    First writeable address = 0 (0x00000000)

    14:51:48 #5 Text 0 File Burncd.cpp, Line 3230
    Turn on Disc-At-Once, using DVD media

    14:51:49 #6 Text 0 File DlgWaitCD.cpp, Line 267
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2243791 (498:37.16, 4382MB)

    14:51:49 #7 Text 0 File DlgWaitCD.cpp, Line 279
    Write in overburning mode: NO (enabled: CD)

    14:51:49 #8 Text 0 File DlgWaitCD.cpp, Line 2433
    Recorder: HL-DT-ST DVDRAM GSA-4040B, Media type: DVD-R
    Disc Manufacturer: -
    Disc Application Code: 64, Disc Physical Code: 193

    14:51:49 #9 Text 0 File DlgWaitCD.cpp, Line 445
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    14:51:49 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2243792 (2243792) = #2243792/498:37.17
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2243792 blocks [HL-DT-ST DVDRAM GSA-4040B]
    --------------------------------------------------------------

    14:51:49 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [HL-DT-ST DVDRAM GSA-4040B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4595286016, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2243792 | lead-out | 1 | 0x41 | 0x00

    14:51:49 #12 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    14:51:51 #13 Text 0 File Burncd.cpp, Line 4114
    Cache writing successful.

    14:51:51 #14 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    14:51:51 #15 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 2x (2,770 KB/s)

    14:51:51 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    14:51:51 #17 Text 0 File DVDR.cpp, Line 2316
    Recording mode: Sequential Recording Mode

    14:51:51 #18 Text 0 File Mmc.cpp, Line 21592
    Set BUFE: Buffer underrun protection -> ON

    14:51:51 #19 Text 0 File DVDR.cpp, Line 2470
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    14:51:51 #20 Text 0 File Cdrdrv.cpp, Line 8821
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    14:52:07 #21 SCSI -1135 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03FE0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x10
    0x32 0x4D 0x03 0x0C 0x0C 0x00

    14:52:07 #22 CDR -1135 File Writer.cpp, Line 311
    Write error

    14:52:07 #23 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    14:52:08 #24 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    14:52:08 #25 Text 0 File DVDR.cpp, Line 2708
    EndDAO: Last written address was -1

    14:52:08 #26 CDR -1135 File WriterStatus.cpp, Line 167
    Write error

    14:52:08 #27 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    14:52:08 #28 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 2x (2,770 KB/s)


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 29/08/2002 01:27:50 (Adapter driver for rec)
    File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 30/04/2004 09:33:00 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    Peter Winter
    SkyWatch, Lda.
    1A23-0064-4034-7458-3045-5959

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\2\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
    Nero Version: 6.6.0.14
    Internal Version: 6, 6, 0, 14d

    Recorder: <HL-DT-ST DVDRAM GSA-4040B>Version: A300 - HA 1 TA 1 - 6.6.0.14
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 3 TA 0 - 6.6.0.14
    Adapter driver: <a347scsi> HA 3

    === Scsi-Device-Map ===
    DiskPeripheral : FUJITSU MPF3204AT atapi Port 0 ID 0 DMA: On
    DiskPeripheral : F J T U M F 2 4 T atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8160B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4040B atapi Port 1 ID 1 DMA: On
    DiskPeripheral : iomega jaz 1GB J.86 symc810 Port 2 ID 4 DMA: Off
    DiskPeripheral : QUANTUM FIREBALL ST4.3S 0F0C symc810 Port 2 ID 6 DMA: Off
    CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8160B D: CDRom0
    HL-DT-ST DVDRAM GSA-4040B E: CDRom1
    AXV CD/DVD-ROM I: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 70254592 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 479MB (490992kB)
    Free physical memory: 167MB (171872kB)
    Memory in use : 64
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    6.7.2005
    ISO compilation
    14:54:21 #1 Text 0 File Isodoc.cpp, Line 6314
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : TRUE
    Write : FALSE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 2 (Max. of 31 chars)
    Character set : ASCII
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    14:54:22 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    14:54:22 #3 Text 0 File Writer.cpp, Line 122
    Writer HL-DT-ST DVDRAM GSA-4040B running

    14:54:22 #4 ISO9660GEN -11 File geniso.cpp, Line 3297
    First writeable address = 0 (0x00000000)

    14:54:22 #5 Text 0 File Burncd.cpp, Line 3230
    Turn on Disc-At-Once, using DVD media

    14:54:23 #6 Text 0 File DlgWaitCD.cpp, Line 267
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2243791 (498:37.16, 4382MB)

    14:54:23 #7 Text 0 File DlgWaitCD.cpp, Line 279
    Write in overburning mode: NO (enabled: CD)

    14:54:23 #8 Text 0 File DlgWaitCD.cpp, Line 2433
    Recorder: HL-DT-ST DVDRAM GSA-4040B, Media type: DVD-R
    Disc Manufacturer: -
    Disc Application Code: 64, Disc Physical Code: 193

    14:54:23 #9 Text 0 File DlgWaitCD.cpp, Line 445
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    14:54:23 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2243792 (2243792) = #2243792/498:37.17
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2243792 blocks [HL-DT-ST DVDRAM GSA-4040B]
    --------------------------------------------------------------

    14:54:23 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [HL-DT-ST DVDRAM GSA-4040B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4595286016, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2243792 | lead-out | 1 | 0x41 | 0x00

    14:54:23 #12 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    14:54:24 #13 Text 0 File Burncd.cpp, Line 4114
    Cache writing successful.

    14:54:24 #14 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    14:54:24 #15 Phase 32 File dlgbrnst.cpp, Line 1832
    Simulation started at 2x (2,770 KB/s)

    14:54:24 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    14:54:24 #17 Text 0 File DVDR.cpp, Line 2316
    Recording mode: Sequential Recording Mode

    14:54:24 #18 Text 0 File Mmc.cpp, Line 21592
    Set BUFE: Buffer underrun protection -> ON

    14:54:24 #19 Text 0 File DVDR.cpp, Line 2470
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    14:54:24 #20 Text 0 File Cdrdrv.cpp, Line 8821
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    14:54:28 #21 Text 0 File Cdrdrv.cpp, Line 1288
    14:54:28.788 - HL-DT-ST DVDRAM GSA-4040B\H1 T1 : Queue again later

    15:22:44 #22 Text 0 File WriterStatus.cpp, Line 116
    <HL-DT-ST DVDRAM GSA-4040B> start writing Lead-Out at LBA 2243792 (223CD0h), lenght 0 blocks

    15:22:44 #23 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    15:22:44 #24 Text 0 File DVDR.cpp, Line 2708
    EndDAO: Last written address was 2243791

    15:23:20 #25 Phase 33 File dlgbrnst.cpp, Line 1832
    Simulation completed successfully at 2x (2,770 KB/s)


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 29/08/2002 01:27:50 (Adapter driver for rec)
    File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 30/04/2004 09:33:00 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    Peter Winter
    SkyWatch, Lda.
    1A23-0064-4034-7458-3045-5959

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\2\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
    Nero Version: 6.6.0.14
    Internal Version: 6, 6, 0, 14d

    Recorder: <HL-DT-ST DVDRAM GSA-4040B>Version: A300 - HA 1 TA 1 - 6.6.0.14
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 3 TA 0 - 6.6.0.14
    Adapter driver: <a347scsi> HA 3

    === Scsi-Device-Map ===
    DiskPeripheral : FUJITSU MPF3204AT atapi Port 0 ID 0 DMA: On
    DiskPeripheral : F J T U M F 2 4 T atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8160B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4040B atapi Port 1 ID 1 DMA: On
    DiskPeripheral : iomega jaz 1GB J.86 symc810 Port 2 ID 4 DMA: Off
    DiskPeripheral : QUANTUM FIREBALL ST4.3S 0F0C symc810 Port 2 ID 6 DMA: Off
    CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8160B D: CDRom0
    HL-DT-ST DVDRAM GSA-4040B E: CDRom1
    AXV CD/DVD-ROM I: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 70254592 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 479MB (490992kB)
    Free physical memory: 136MB (140224kB)
    Memory in use : 71
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    6.7.2005
    ISO compilation
    16:27:30 #1 Text 0 File Isodoc.cpp, Line 6314
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : TRUE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 2 (Max. of 31 chars)
    Character set : ASCII
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    16:27:30 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    16:27:30 #3 Text 0 File Writer.cpp, Line 122
    Writer HL-DT-ST DVDRAM GSA-4040B running

    16:27:30 #4 ISO9660GEN -11 File geniso.cpp, Line 3297
    First writeable address = 0 (0x00000000)

    16:27:31 #5 Text 0 File Burncd.cpp, Line 3230
    Turn on Disc-At-Once, using DVD media

    16:27:32 #6 Text 0 File DlgWaitCD.cpp, Line 267
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2243791 (498:37.16, 4382MB)

    16:27:32 #7 Text 0 File DlgWaitCD.cpp, Line 279
    Write in overburning mode: NO (enabled: CD)

    16:27:32 #8 Text 0 File DlgWaitCD.cpp, Line 2433
    Recorder: HL-DT-ST DVDRAM GSA-4040B, Media type: DVD-R
    Disc Manufacturer: -
    Disc Application Code: 64, Disc Physical Code: 193

    16:27:32 #9 Text 0 File DlgWaitCD.cpp, Line 445
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    16:27:32 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2243792 (2243792) = #2243792/498:37.17
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2243792 blocks [HL-DT-ST DVDRAM GSA-4040B]
    --------------------------------------------------------------

    16:27:32 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [HL-DT-ST DVDRAM GSA-4040B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4595286016, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2243792 | lead-out | 1 | 0x41 | 0x00

    16:27:32 #12 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    16:27:33 #13 Text 0 File Burncd.cpp, Line 4114
    Cache writing successful.

    16:27:33 #14 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    16:27:33 #15 Phase 32 File dlgbrnst.cpp, Line 1832
    Simulation started at 2x (2,770 KB/s)

    16:27:33 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    16:27:33 #17 Text 0 File DVDR.cpp, Line 2316
    Recording mode: Sequential Recording Mode

    16:27:34 #18 Text 0 File Mmc.cpp, Line 21592
    Set BUFE: Buffer underrun protection -> ON

    16:27:34 #19 Text 0 File DVDR.cpp, Line 2470
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    16:27:34 #20 Text 0 File Cdrdrv.cpp, Line 8821
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    16:27:39 #21 Text 0 File Cdrdrv.cpp, Line 1288
    16:27:39.315 - HL-DT-ST DVDRAM GSA-4040B\H1 T1 : Queue again later

    16:55:55 #22 Text 0 File WriterStatus.cpp, Line 116
    <HL-DT-ST DVDRAM GSA-4040B> start writing Lead-Out at LBA 2243792 (223CD0h), lenght 0 blocks

    16:55:55 #23 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    16:55:55 #24 Text 0 File DVDR.cpp, Line 2708
    EndDAO: Last written address was 2243791

    16:56:31 #25 SCSI -1093 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03614C00
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x02
    Sense Qual: 0x00
    CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
    0x30 0x3C 0x00 0x0C 0x02 0x00

    16:56:31 #26 CDR -1093 File ThreadedTransferInterface.cpp, Line 1901
    No seek complete

    16:56:31 #27 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1901
    Could not perform end of Disc-at-once

    16:56:31 #28 Text 0 File DVDR.cpp, Line 2708
    EndDAO: Last written address was -1

    16:56:31 #29 CDR -201 File WriterStatus.cpp, Line 167
    Invalid write state
    HL-DT-ST DVDRAM GSA-4040B\H1 T1

    16:56:31 #30 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    16:56:31 #31 Phase 34 File dlgbrnst.cpp, Line 1832
    Simulation failed at 2x (2,770 KB/s)


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 29/08/2002 01:27:50 (Adapter driver for rec)
    File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 30/04/2004 09:33:00 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    Peter Winter
    SkyWatch, Lda.
    1A23-0064-4034-7458-3045-5959

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\2\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
    Nero Version: 6.6.0.14
    Internal Version: 6, 6, 0, 14d

    Recorder: <HL-DT-ST DVDRAM GSA-4040B>Version: A300 - HA 1 TA 1 - 6.6.0.14
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 3 TA 0 - 6.6.0.14
    Adapter driver: <a347scsi> HA 3

    === Scsi-Device-Map ===
    DiskPeripheral : FUJITSU MPF3204AT atapi Port 0 ID 0 DMA: On
    DiskPeripheral : F J T U M F 2 4 T atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8160B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4040B atapi Port 1 ID 1 DMA: On
    DiskPeripheral : iomega jaz 1GB J.86 symc810 Port 2 ID 4 DMA: Off
    DiskPeripheral : QUANTUM FIREBALL ST4.3S 0F0C symc810 Port 2 ID 6 DMA: Off
    CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8160B D: CDRom0
    HL-DT-ST DVDRAM GSA-4040B E: CDRom1
    AXV CD/DVD-ROM I: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 70254592 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 479MB (490992kB)
    Free physical memory: 158MB (162692kB)
    Memory in use : 66
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    6.7.2005
    ISO compilation
    17:21:40 #1 Text 0 File Isodoc.cpp, Line 6314
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : TRUE
    Write : FALSE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 2 (Max. of 31 chars)
    Character set : ASCII
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : FALSE

    17:21:41 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    17:21:41 #3 Text 0 File Writer.cpp, Line 122
    Writer HL-DT-ST DVDRAM GSA-4040B running

    17:21:41 #4 ISO9660GEN -11 File geniso.cpp, Line 3297
    First writeable address = 0 (0x00000000)

    17:21:41 #5 Text 0 File Burncd.cpp, Line 3230
    Turn on Disc-At-Once, using DVD media

    17:21:42 #6 Text 0 File DlgWaitCD.cpp, Line 267
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2243759 (498:36.59, 4382MB)

    17:21:42 #7 Text 0 File DlgWaitCD.cpp, Line 279
    Write in overburning mode: NO (enabled: CD)

    17:21:42 #8 Text 0 File DlgWaitCD.cpp, Line 2433
    Recorder: HL-DT-ST DVDRAM GSA-4040B, Media type: DVD-R
    Disc Manufacturer: -
    Disc Application Code: 64, Disc Physical Code: 193

    17:21:42 #9 Text 0 File DlgWaitCD.cpp, Line 445
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    17:21:42 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2243760 (2243760) = #2243760/498:36.60
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2243760 blocks [HL-DT-ST DVDRAM GSA-4040B]
    --------------------------------------------------------------

    17:21:42 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [HL-DT-ST DVDRAM GSA-4040B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4595220480, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2243760 | lead-out | 1 | 0x41 | 0x00

    17:21:42 #12 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    17:21:43 #13 Text 0 File Burncd.cpp, Line 4114
    Cache writing successful.

    17:21:43 #14 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    17:21:43 #15 Phase 32 File dlgbrnst.cpp, Line 1832
    Simulation started at 2x (2,770 KB/s)

    17:21:43 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    17:21:43 #17 Text 0 File DVDR.cpp, Line 2316
    Recording mode: Sequential Recording Mode

    17:21:43 #18 Text 0 File Mmc.cpp, Line 21592
    Set BUFE: Buffer underrun protection -> ON

    17:21:43 #19 Text 0 File DVDR.cpp, Line 2470
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    17:21:43 #20 Text 0 File Cdrdrv.cpp, Line 8821
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    17:21:50 #21 Text 0 File Cdrdrv.cpp, Line 1288
    17:21:50.157 - HL-DT-ST DVDRAM GSA-4040B\H1 T1 : Queue again later

    17:50:05 #22 Text 0 File WriterStatus.cpp, Line 116
    <HL-DT-ST DVDRAM GSA-4040B> start writing Lead-Out at LBA 2243760 (223CB0h), lenght 0 blocks

    17:50:05 #23 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    17:50:05 #24 Text 0 File DVDR.cpp, Line 2708
    EndDAO: Last written address was 2243759

    17:50:27 #25 SCSI -1093 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03614C00
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x02
    Sense Qual: 0x00
    CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
    0x30 0x3C 0x00 0x0C 0x02 0x00

    17:50:28 #26 CDR -1093 File ThreadedTransferInterface.cpp, Line 1901
    No seek complete

    17:50:28 #27 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1901
    Could not perform end of Disc-at-once

    17:50:28 #28 Text 0 File DVDR.cpp, Line 2708
    EndDAO: Last written address was -1

    17:50:28 #29 CDR -201 File WriterStatus.cpp, Line 167
    Invalid write state
    HL-DT-ST DVDRAM GSA-4040B\H1 T1

    17:50:28 #30 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    17:50:28 #31 Phase 34 File dlgbrnst.cpp, Line 1832
    Simulation failed at 2x (2,770 KB/s)


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 29/08/2002 01:27:50 (Adapter driver for rec)
    File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 30/04/2004 09:33:00 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    Peter Winter
    SkyWatch, Lda.
    1A23-0064-4034-7458-3045-5959

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\2\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
    Nero Version: 6.6.0.14
    Internal Version: 6, 6, 0, 14d

    Recorder: <HL-DT-ST DVDRAM GSA-4040B>Version: A300 - HA 1 TA 1 - 6.6.0.14
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 3 TA 0 - 6.6.0.14
    Adapter driver: <a347scsi> HA 3

    === Scsi-Device-Map ===
    DiskPeripheral : FUJITSU MPF3204AT atapi Port 0 ID 0 DMA: On
    DiskPeripheral : F J T U M F 2 4 T atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8160B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4040B atapi Port 1 ID 1 DMA: On
    DiskPeripheral : iomega jaz 1GB J.86 symc810 Port 2 ID 4 DMA: Off
    DiskPeripheral : QUANTUM FIREBALL ST4.3S 0F0C symc810 Port 2 ID 6 DMA: Off
    CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8160B D: CDRom0
    HL-DT-ST DVDRAM GSA-4040B E: CDRom1
    AXV CD/DVD-ROM I: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 70254592 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 479MB (490992kB)
    Free physical memory: 157MB (160852kB)
    Memory in use : 67
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    6.7.2005
    ISO compilation
    18:06:08 #1 Text 0 File Isodoc.cpp, Line 6314
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : TRUE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 2 (Max. of 31 chars)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : FALSE

    18:06:08 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    18:06:08 #3 Text 0 File Writer.cpp, Line 122
    Writer HL-DT-ST DVDRAM GSA-4040B running

    18:06:08 #4 ISO9660GEN -11 File geniso.cpp, Line 3297
    First writeable address = 0 (0x00000000)

    18:06:09 #5 Text 0 File Burncd.cpp, Line 3230
    Turn on Disc-At-Once, using DVD media

    18:06:10 #6 Text 0 File DlgWaitCD.cpp, Line 267
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2243759 (498:36.59, 4382MB)

    18:06:10 #7 Text 0 File DlgWaitCD.cpp, Line 279
    Write in overburning mode: NO (enabled: CD)

    18:06:10 #8 Text 0 File DlgWaitCD.cpp, Line 2433
    Recorder: HL-DT-ST DVDRAM GSA-4040B, Media type: DVD-R
    Disc Manufacturer: -
    Disc Application Code: 64, Disc Physical Code: 193

    18:06:10 #9 Text 0 File DlgWaitCD.cpp, Line 445
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    18:06:10 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2243760 (2243760) = #2243760/498:36.60
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2243760 blocks [HL-DT-ST DVDRAM GSA-4040B]
    --------------------------------------------------------------

    18:06:10 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [HL-DT-ST DVDRAM GSA-4040B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4595220480, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2243760 | lead-out | 1 | 0x41 | 0x00

    18:06:10 #12 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    18:06:12 #13 Text 0 File Burncd.cpp, Line 4114
    Cache writing successful.

    18:06:12 #14 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    18:06:12 #15 Phase 32 File dlgbrnst.cpp, Line 1832
    Simulation started at 2x (2,770 KB/s)

    18:06:12 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    18:06:12 #17 Text 0 File DVDR.cpp, Line 2316
    Recording mode: Sequential Recording Mode

    18:06:12 #18 Text 0 File Mmc.cpp, Line 21592
    Set BUFE: Buffer underrun protection -> ON

    18:06:12 #19 Text 0 File DVDR.cpp, Line 2470
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    18:06:12 #20 Text 0 File Cdrdrv.cpp, Line 8821
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    18:06:17 #21 Text 0 File Cdrdrv.cpp, Line 1288
    18:06:17.701 - HL-DT-ST DVDRAM GSA-4040B\H1 T1 : Queue again later

    18:34:34 #22 Text 0 File WriterStatus.cpp, Line 116
    <HL-DT-ST DVDRAM GSA-4040B> start writing Lead-Out at LBA 2243760 (223CB0h), lenght 0 blocks

    18:34:34 #23 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    18:34:34 #24 Text 0 File DVDR.cpp, Line 2708
    EndDAO: Last written address was 2243759

    18:35:17 #25 SCSI -1093 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03614C00
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x02
    Sense Qual: 0x00
    CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
    0x30 0x3C 0x00 0x0C 0x02 0x00

    18:35:17 #26 CDR -1093 File ThreadedTransferInterface.cpp, Line 1901
    No seek complete

    18:35:17 #27 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1901
    Could not perform end of Disc-at-once

    18:35:17 #28 Text 0 File DVDR.cpp, Line 2708
    EndDAO: Last written address was -1

    18:35:17 #29 CDR -201 File WriterStatus.cpp, Line 167
    Invalid write state
    HL-DT-ST DVDRAM GSA-4040B\H1 T1

    18:35:17 #30 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    18:35:17 #31 Phase 34 File dlgbrnst.cpp, Line 1832
    Simulation failed at 2x (2,770 KB/s)


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 29/08/2002 01:27:50 (Adapter driver for rec)
    File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 30/04/2004 09:33:00 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    Peter Winter
    SkyWatch, Lda.
    1A23-0064-4034-7458-3045-5959

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\2\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
    Nero Version: 6.6.0.14
    Internal Version: 6, 6, 0, 14d

    Recorder: <HL-DT-ST DVDRAM GSA-4040B>Version: A300 - HA 1 TA 1 - 6.6.0.14
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 3 TA 0 - 6.6.0.14
    Adapter driver: <a347scsi> HA 3

    === Scsi-Device-Map ===
    DiskPeripheral : FUJITSU MPF3204AT atapi Port 0 ID 0 DMA: On
    DiskPeripheral : F J T U M F 2 4 T atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8160B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4040B atapi Port 1 ID 1 DMA: On
    DiskPeripheral : iomega jaz 1GB J.86 symc810 Port 2 ID 4 DMA: Off
    DiskPeripheral : QUANTUM FIREBALL ST4.3S 0F0C symc810 Port 2 ID 6 DMA: Off
    CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8160B D: CDRom0
    HL-DT-ST DVDRAM GSA-4040B E: CDRom1
    AXV CD/DVD-ROM I: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 70254592 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 479MB (490992kB)
    Free physical memory: 143MB (146664kB)
    Memory in use : 70
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    7.7.2005
    ISO compilation
    11:14:06 #1 Text 0 File Isodoc.cpp, Line 6314
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : TRUE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 2 (Max. of 31 chars)
    Character set : ASCII
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    11:14:07 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    11:14:07 #3 Text 0 File Writer.cpp, Line 122
    Writer HL-DT-ST DVDRAM GSA-4040B running

    11:14:07 #4 ISO9660GEN -11 File geniso.cpp, Line 3297
    First writeable address = 0 (0x00000000)

    11:14:07 #5 Text 0 File Burncd.cpp, Line 3230
    Turn on Disc-At-Once, using DVD media

    11:14:08 #6 Text 0 File DlgWaitCD.cpp, Line 267
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2243759 (498:36.59, 4382MB)

    11:14:08 #7 Text 0 File DlgWaitCD.cpp, Line 279
    Write in overburning mode: NO (enabled: CD)

    11:14:08 #8 Text 0 File DlgWaitCD.cpp, Line 2433
    Recorder: HL-DT-ST DVDRAM GSA-4040B, Media type: DVD-R
    Disc Manufacturer: -
    Disc Application Code: 64, Disc Physical Code: 193

    11:14:08 #9 Text 0 File DlgWaitCD.cpp, Line 445
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    11:14:08 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2243760 (2243760) = #2243760/498:36.60
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2243760 blocks [HL-DT-ST DVDRAM GSA-4040B]
    --------------------------------------------------------------

    11:14:08 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [HL-DT-ST DVDRAM GSA-4040B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4595220480, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2243760 | lead-out | 1 | 0x41 | 0x00

    11:14:08 #12 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    11:14:10 #13 Text 0 File Burncd.cpp, Line 4114
    Cache writing successful.

    11:14:10 #14 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    11:14:11 #15 Phase 32 File dlgbrnst.cpp, Line 1832
    Simulation started at 2x (2,770 KB/s)

    11:14:11 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    11:14:11 #17 Text 0 File DVDR.cpp, Line 2316
    Recording mode: Sequential Recording Mode

    11:14:11 #18 Text 0 File Mmc.cpp, Line 21592
    Set BUFE: Buffer underrun protection -> ON

    11:14:11 #19 Text 0 File DVDR.cpp, Line 2470
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    11:14:11 #20 Text 0 File Cdrdrv.cpp, Line 8821
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    11:14:17 #21 Text 0 File Cdrdrv.cpp, Line 1288
    11:14:17.493 - HL-DT-ST DVDRAM GSA-4040B\H1 T1 : Queue again later

    11:42:34 #22 Text 0 File WriterStatus.cpp, Line 116
    <HL-DT-ST DVDRAM GSA-4040B> start writing Lead-Out at LBA 2243760 (223CB0h), lenght 0 blocks

    11:42:34 #23 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    11:42:34 #24 Text 0 File DVDR.cpp, Line 2708
    EndDAO: Last written address was 2243759

    11:43:18 #25 SCSI -1093 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03664C00
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x02
    Sense Qual: 0x00
    CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
    0x30 0x3C 0x00 0x0C 0x02 0x00

    11:43:18 #26 CDR -1093 File ThreadedTransferInterface.cpp, Line 1901
    No seek complete

    11:43:18 #27 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1901
    Could not perform end of Disc-at-once

    11:43:18 #28 Text 0 File DVDR.cpp, Line 2708
    EndDAO: Last written address was -1

    11:43:18 #29 CDR -201 File WriterStatus.cpp, Line 167
    Invalid write state
    HL-DT-ST DVDRAM GSA-4040B\H1 T1

    11:43:18 #30 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    11:43:19 #31 Phase 34 File dlgbrnst.cpp, Line 1832
    Simulation failed at 2x (2,770 KB/s)


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 29/08/2002 01:27:50 (Adapter driver for rec)
    File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 30/04/2004 09:33:00 (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    Peter Winter
    SkyWatch, Lda.
    1A23-0064-4034-7458-3045-5959

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\2\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
    Nero Version: 6.6.0.14
    Internal Version: 6, 6, 0, 14d

    Recorder: <HL-DT-ST DVDRAM GSA-4040B>Version: A300 - HA 1 TA 1 - 6.6.0.14
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <HL-DT-ST DVD-ROM GDR8160B>Version: 0009 - HA 1 TA 0 - 6.6.0.14
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : FUJITSU MPF3204AT atapi Port 0 ID 0 DMA: On
    DiskPeripheral : FUJITSU MPF3204AT atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : HL-DT-ST DVD-ROM GDR8160B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4040B atapi Port 1 ID 1 DMA: On
    DiskPeripheral : iomega jaz 1GB J.86 symc810 Port 2 ID 4 DMA: Off
    DiskPeripheral : QUANTUM FIREBALL ST4.3S 0F0C symc810 Port 2 ID 6 DMA: Off
    CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 3 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVD-ROM GDR8160B D: CDRom0
    HL-DT-ST DVDRAM GSA-4040B E: CDRom1
    AXV CD/DVD-ROM I: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 70254592 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 479MB (490992kB)
    Free physical memory: 167MB (171624kB)
    Memory in use : 65
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    7.7.2005
    ISO compilation
    16:22:54 #1 Text 0 File Isodoc.cpp, Line 6314
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : TRUE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : DAO
    Mode : 1
    ISO Level : 2 (Max. of 31 chars)
    Character set : ASCII
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : FALSE

    16:22:55 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    16:22:55 #3 Text 0 File Writer.cpp, Line 122
    Writer HL-DT-ST DVDRAM GSA-4040B running

    16:22:55 #4 ISO9660GEN -11 File geniso.cpp, Line 3297
    First writeable address = 0 (0x00000000)

    16:22:56 #5 Text 0 File Burncd.cpp, Line 3230
    Turn on Disc-At-Once, using DVD media

    16:22:56 #6 Text 0 File DlgWaitCD.cpp, Line 267
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2243871 (498:38.21, 4382MB)

    16:22:56 #7 Text 0 File DlgWaitCD.cpp, Line 279
    Write in overburning mode: NO

    16:22:56 #8 Text 0 File DlgWaitCD.cpp, Line 2433
    Recorder: HL-DT-ST DVDRAM GSA-4040B, Media type: DVD-R
    Disc Manufacturer: -
    Disc Application Code: 64, Disc Physical Code: 193

    16:22:56 #9 Text 0 File DlgWaitCD.cpp, Line 445
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    16:22:56 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2243872 (2243872) = #2243872/498:38.22
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2243872 blocks [HL-DT-ST DVDRAM GSA-4040B]
    --------------------------------------------------------------

    16:23:13 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [HL-DT-ST DVDRAM GSA-4040B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4595449856, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2243872 | lead-out | 1 | 0x41 | 0x00

    16:23:13 #12 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    16:23:15 #13 Text 0 File Burncd.cpp, Line 4114
    Cache writing successful.

    16:23:15 #14 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    16:23:15 #15 Phase 32 File dlgbrnst.cpp, Line 1832
    Simulation started at 2x (2,770 KB/s)

    16:23:16 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    16:23:16 #17 Text 0 File DVDR.cpp, Line 2316
    Recording mode: Sequential Recording Mode

    16:23:16 #18 Text 0 File Mmc.cpp, Line 21592
    Set BUFE: Buffer underrun protection -> ON

    16:23:16 #19 Text 0 File DVDR.cpp, Line 2470
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    16:23:16 #20 Text 0 File Cdrdrv.cpp, Line 8821
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    16:23:21 #21 Text 0 File Cdrdrv.cpp, Line 1288
    16:23:21.805 - HL-DT-ST DVDRAM GSA-4040B\H1 T1 : Queue again later

    16:51:38 #22 Text 0 File WriterStatus.cpp, Line 116
    <HL-DT-ST DVDRAM GSA-4040B> start writing Lead-Out at LBA 2243872 (223D20h), lenght 0 blocks

    16:51:39 #23 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    16:51:39 #24 Text 0 File DVDR.cpp, Line 2708
    EndDAO: Last written address was 2243871

    16:52:01 #25 SCSI -1093 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03614C00
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x02
    Sense Qual: 0x00
    CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
    0x30 0x3C 0x00 0x0C 0x02 0x00

    16:52:01 #26 CDR -1093 File ThreadedTransferInterface.cpp, Line 1901
    No seek complete

    16:52:01 #27 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1901
    Could not perform end of Disc-at-once

    16:52:01 #28 Text 0 File DVDR.cpp, Line 2708
    EndDAO: Last written address was -1

    16:52:01 #29 CDR -201 File WriterStatus.cpp, Line 167
    Invalid write state
    HL-DT-ST DVDRAM GSA-4040B\H1 T1

    16:52:01 #30 TRANSFER -24 File WriterStatus.cpp, Line 167
    Could not perform end of Disc-at-once

    16:52:01 #31 Phase 34 File dlgbrnst.cpp, Line 1832
    Simulation failed at 2x (2,770 KB/s)


    Existing drivers:
    File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 29/08/2002 01:27:50 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
     
  2. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    i got your logfile in notepad, but as the log is appended to each burn, you have a few logs of different burns. the big problem there is your serial number is on display -

    - EDIT OUT the serial numbers, even edit leaving just the last section of log, each section is preceded by the above lines, by now someone will have stolen your serial number.

    will report back when ive digested your logfile..
     
  3. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    LMAO, i only speak Nero and English !


    - as i mentioned before, edit out all references to your serial number, beginning with 1A23-*

    - version A302 (dateed 2003) firmware for your burner is here - http://forum.rpc1.org/dl_firmware.php?download_id=1628 (there's also A303 and A304 listed there but they don't seem to exist at the links specified. Trouble is that if the firmware really is that old, your drive will have trouble with lots of modern media

    - fix your DMA settings with info from here - http://home.comcast.net/~bbmayo/FAQ.htm

    - seems you've previously set the target size to this level in DVD Shrink, OR you've repeatedly tried to burn the same movie. If you haven't set the target size, make sure to do it, thus avoiding outer edge of discs

    - your drive can't recognise that media

    - drive isn't happy with that media

    - nice one, you're not watsing disks this way

    - that's not right; if doing the DMA thing above doesn't help change this, reinstall the correct drivers
     
  4. pw-pro

    pw-pro Guest

    Hi Creaky B
    Thank's a lot for your attention will be working on your advices soon.
    But please explain one thing - if possible?
    How come that a simple update of Nero can bring this problems - no drivers - nothing else was changed! just simply downloaded upgrade and overinstalled it!

    Peter
    ______
    seems you've previously set the target size to this level in DVD Shrink, OR you've repeatedly tried to burn the same movie. If you haven't set the target size, make sure to do it, thus avoiding outer edge of discs
    +++++++
    Yes I tried to burn the same files (not a moive but simply some hundred Photo-Raw files) with different settings in the ISO dialog as I sought this might be the problem!

    What do you mean with "set the target size" how do I do this?
    Sorry about this but as you can obviously see I dont speak NERO I am just a Photographer copying his Photos for Bkup reasons to DVD's and this various times daily. What I do normally is simply copying as many files as possible to the compilation untill reaching near the read line (which is set to 4450 MB) - I know there is a way to change this - is this what you mean with "change target size"?

    Peter
     
  5. pw-pro

    pw-pro Guest

    One other thing:
    The DVD's I use and used for the last weeks at least are the following:
    EMTEC DVD-R 4.7GB 120Min 1-4x vertified
    and
    PROSTORE DVD-R 4x 4.7GB
    and
    MITSAI DVD-R 1x-4x

    I just by the cheapest there is always and within the last months and may be around 100 burned DVD'a I never had a single problem! - this untill jesterday and upgrading NERO

    Peter
     
  6. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    Hi, with stuff like Nero logs, i report on what i see, that's all. DVD burning is not an exact science, you would not believe how many posts i get thru a night, with a lot of the same old problems. One of the biggest causes of problems is duff media, but the same type of problems in people's setups, ie DMA, firmware etc make burning a frustrating experience for people, and it's something that can work for 100s of burns then not work at all
     
  7. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    as to using cheapest (crappiest!) media, see the 2nd link in my signature, then skim-thru the 1st link, to see how you 100s of crap discs can seem to work for ages then give problems later. It really is a false economy to buy crap media, that one you can most definitely trust me on. I personally wasted a lot of money and time due to bad media, now i don't have burning problems so spend a lot of time helping persuade people to get off the bad media.
    As i say in my sig -

    :)
     

Share This Page