ok so i had this problem once, but i can't remember what i did to fix it. Here's my Nero log. (BTW i'm from CHILE so the log is in spanish :/) Gustavo Mejias Worms, Inc. 1C82-**serial number removed by creaky** Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.9.6.0 Internal Version: 7, 9, 6, 0 Recorder: <HL-DT-ST DVDRAM GSA-H10A>Version: JL02 - HA 1 TA 0 - 7.9.6.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <SN3306M ETF650W >Version: 1.0 - HA 1 TA 2 - 7.9.6.0 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === DiskPeripheral : SAMSUNG SP0822N WA10 nvidesm Port 0 ID 0 DMA: Off DiskPeripheral : Maxtor 2B020H1 WAH2 nvidesm Port 0 ID 1 DMA: Off DiskPeripheral : WDC WD400BB-00JHA0 05.0 nvidesm Port 1 ID 0 DMA: Off CdRomPeripheral : HL-DT-STDVDRAM GSA-H10A JL02 nvidesm Port 1 ID 1 DMA: Off CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 2 ID 0 DMA: Off CdRomPeripheral : SN3306M ETF650W 1.0 dtscsi Port 3 ID 0 DMA: Off === CDRom-Device-Map === SN3306M ETF650W J: CdRom2 HL-DT-ST DVDRAM GSA-H10A M: CdRom0 SCSIVAX DVD/CD-ROM N: CdRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 164MB (168292kB) Memory in use : 67 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 8.6.2007 Compilación UDF 15:42:46 #1 Text 0 File SCSIPTICommands.cpp, Line 424 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 15:42:47 #2 Text 0 File Isodoc.cpp, Line 6663 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : pure UDF Options : automatic UDF Revision : 1.02 UDF Partition Type : physical 15:42:47 #3 Text 0 File Burncd.cpp, Line 3508 Turn on Disc-At-Once, using DVD media 15:42:47 #4 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1597791 (355:03.66, 3120MB) 15:42:47 #5 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 15:42:47 #6 Text 0 File DlgWaitCD.cpp, Line 2964 Recorder: HL-DT-ST DVDRAM GSA-H10A, Media type: DVD-R Disc Manufacturer: SKC Co - .,Ltd. Disc Application Code: 64, Disc Physical Code: 193 15:42:47 #7 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 15:42:47 #8 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1597792 (1597792) = #1597792/355:3.67 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1597792 blocks [M: HL-DT-ST DVDRAM GSA-H10A] -------------------------------------------------------------- 15:42:47 #9 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [M: HL-DT-ST DVDRAM GSA-H10A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3272278016, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 1597792 | 0 | 0x00 1597792 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 15:42:48 #10 Text 0 File SCSIPTICommands.cpp, Line 215 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 15:42:48 #11 Text 0 File Burncd.cpp, Line 4294 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 15:42:48 #12 Phase 24 File dlgbrnst.cpp, Line 1762 Caching of files started 15:42:48 #13 Text 0 File Burncd.cpp, Line 4413 Cache writing successful. 15:42:48 #14 Phase 25 File dlgbrnst.cpp, Line 1762 Caching of files completed 15:42:48 #15 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 4x (5.540 KB/s) 15:42:48 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 15:42:48 #17 Text 0 File DVDR.cpp, Line 3225 Recording mode: Sequential Recording Mode 15:42:48 #18 Text 0 File DVDR.cpp, Line 3381 Start write address at LBA 0 DVD high compatibility mode: Yes 15:42:48 #19 Text 0 File Cdrdrv.cpp, Line 9872 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Revision number of maximum recording speed: - Revision number of minimum recording speed: - Revision number table of recording speed: - - - - - - - Class: 0 Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 15:42:48 #20 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 74390400 15:42:49 #21 SPTI -31 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x00) WinError(87) NeroError(-31) Sense Key: 0x00 (KEY_NO_SENSE) Sense Code: 0x00 Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 Buffer x09bf0040: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 15:42:49 #22 SPTI -31 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x00) WinError(87) NeroError(-31) Sense Key: 0x00 (KEY_NO_SENSE) Sense Code: 0x00 Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 Buffer x08264b40: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 15:42:49 #23 Text 0 File MMC.cpp, Line 20100 Writer-Buffer for M: HL-DT-ST DVDRAM GSA-H10A reduced to 32768Bytes 15:42:49 #24 SPTI -31 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x00) WinError(87) NeroError(-31) Sense Key: 0x00 (KEY_NO_SENSE) Sense Code: 0x00 Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 00 00 00 00 10 00 00 00 Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 Buffer x08248300: Len x8000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 15:42:49 #25 CDR -31 File Writer.cpp, Line 303 Buffer too large M: HL-DT-ST DVDRAM GSA-H10A 15:42:52 #26 Text 0 File DVDR.cpp, Line 3783 EndDAO: Last written address was -1 (FFFFFFFFh) 15:42:52 #27 Phase 38 File dlgbrnst.cpp, Line 1762 Burn process failed at 4x (5.540 KB/s) 15:42:52 #28 Text 0 File SCSIPTICommands.cpp, Line 261 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 15:42:57 #29 SPTI -1079 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1079) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x53 Sense Qual: 0x00 CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00 Sense Area: 0x70 00 04 00 00 00 00 10 02 00 03 0C 53 15:42:59 #30 Text 0 File Cdrdrv.cpp, Line 11185 DriveLocker: UnLockVolume completed 15:42:59 #31 Text 0 File SCSIPTICommands.cpp, Line 424 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
i tried to set my DMA on, but i don't have the "Advanced Settings" tab. My motherboard is a Chaintech APOGEE 7NJL1. http://www.motherboard.cz/mb/chaintech/7NJL1.htm 512 DDR ram HDD1 Samsung SP0822N 80GB HDD2 Maxtor 2B020H1 20GB HDD3 WD WD400BB-00JHA0 40GB DVD HL-DT-STDVDRAM GSA-H10A (which is borrowed from a friend)
heres a guide to get you're drives back to DMA mode http://forums.afterdawn.com/thread_view.cfm/260038
also, look for any posts here - http://forums.afterdawn.com/thread_view.cfm/231433 by poster 'kurtp21'..
ok, here's the dilema. I doesn't seem to have the "Advanced Settings" tab under the IDE/ATA channel. Though i uninstalled the driver, the pc hung and i have to restart, BUT windows won't open since it has no CHANNELS to detect anything at all. Separetely, i can't uninstall Primary or Secondary IDE channel or the DVD-R. I've checked almost 4 times. I've read thru your guide and the post you have left me, but so far... nothing has happened. grts gUZ!
