Hi all, I've been using Nero 7 for a while now without any problem. However, lately I'm having trouble burning data CDs. When I burn a CD or DVD data disk, it stops 1:00 into the burn process. I've searched the forum for solutions to my problem. I've checked DMA, disabled the CD recording, closed programs, burnt at much less than half capacity. I've wasted about 20 blanks discs already, so any ideas or help is very much appreciated. Attached is the log, I'll be happy to provide any other requested information. Thanks for your time. xxxxxxxxxxxxxxxxxxxx Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 1:54:32 PM NT-SPTI used Nero Version: 7.2.0.3 Internal Version: 7, 2, 0, 3 Recorder: <PIONEER DVD-RW DVR-106D>Version: 1.05 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <PIONEER DVD-RW DVR-106D>Version: 1.05 - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : PIONEER DVD-RW DVR-106D atapi Port 1 ID 1 DMA: Off === CDRom-Device-Map === PIONEER DVD-RW DVR-106D D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 511MB (523764kB) Free physical memory: 167MB (171360kB) Memory in use : 67 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 25.5.2006 UDF compilation 12:08:46 AM #1 Text 0 File Isodoc.cpp, Line 6424 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 UDF Mode : pure UDF Options : automatic UDF Revision : 1.02 UDF Partition Type : physical 12:08:46 AM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 72704KB of Memory 12:08:46 AM #3 Text 0 File Reader.cpp, Line 124 Reader running 12:08:46 AM #4 Text 0 File Writer.cpp, Line 113 Writer D: PIONEER DVD-RW DVR-106D running 12:08:46 AM #5 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 12:08:47 AM #6 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2214287 (492:03.62, 4324MB) 12:08:47 AM #7 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 12:08:47 AM #8 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: PIONEER DVD-RW DVR-106D, Media type: DVD-R Disc Manufacturer: MCC 02 - RG20 Disc Application Code: 64, Disc Physical Code: 193 12:08:47 AM #9 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:08:47 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2214288 (2214288) = #2214288/492:3.63 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2214288 blocks [D: PIONEER DVD-RW DVR-106D] -------------------------------------------------------------- 12:08:47 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: PIONEER DVD-RW DVR-106D] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4534861824, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2214288 | lead-out | 1 | 0x41 | 0x00 12:08:47 AM #12 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 12:08:47 AM #13 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 12:08:47 AM #14 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 12:08:47 AM #15 Text 0 File Burncd.cpp, Line 4199 Cache writing successful. 12:08:47 AM #16 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 12:08:47 AM #17 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 4x (5,540 KB/s) 12:08:47 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 12:08:47 AM #19 Text 0 File DVDR.cpp, Line 2786 Recording mode: Sequential Recording Mode for Multisession 12:08:47 AM #20 Text 0 File DVDR.cpp, Line 2942 Start write address at LBA 0 DVD high compatibility mode: Yes 12:08:47 AM #21 Text 0 File Cdrdrv.cpp, Line 8914 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 12:09:33 AM #22 Text 0 File Cdrdrv.cpp, Line 1214 00:09:33.106 - D: PIONEER DVD-RW DVR-106D : Queue again later 12:09:52 AM #23 Text 0 File Cdrdrv.cpp, Line 1214 00:09:52.809 - D: PIONEER DVD-RW DVR-106D : Queue again later 12:09:54 AM #24 SPTI -1135 File SCSIPassThrough.cpp, Line 290 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 09 00 00 00 20 00 00 00 Sense Area: 0x71 00 03 00 00 05 F0 0E 00 00 00 00 0C Buffer x05480000: Len x10000 0x52 5A 5E 9E 28 5D F6 EB E7 8F A3 BC 70 C6 DF 75 0x75 D5 53 7F 82 B5 84 F8 44 3A 1D 03 94 A7 6F 12 0xB4 E1 D4 44 A3 03 23 43 C8 CA 99 1A 11 35 3B 11 12:09:54 AM #25 CDR -1135 File Writer.cpp, Line 302 Write error D: PIONEER DVD-RW DVR-106D 12:09:54 AM #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 12:09:54 AM #27 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 12:09:54 AM #28 Text 0 File DVDR.cpp, Line 3182 EndDAO: Last written address was 2303 12:10:20 AM #29 Phase 133 File dlgbrnst.cpp, Line 1730 Writing short lead-out 12:10:20 AM #30 SPTI -1047 File SCSIPassThrough.cpp, Line 290 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1047) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x64 Sense Qual: 0x00 CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 64 12:10:20 AM #31 SPTI -1176 File SCSIPassThrough.cpp, Line 290 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x04 CDB Data: 0x5B 01 02 00 00 03 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 72 04 12:10:20 AM #32 CDR -1047 File WriterStatus.cpp, Line 167 Illegal mode for this track D: PIONEER DVD-RW DVR-106D 12:10:20 AM #33 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 12:10:20 AM #34 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\InCDfs.SYS': Ver=5, 1, 0, 5, size=102016 bytes, created 5/04/2006 11:34:04 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=5, 1, 0, 5, size=29568 bytes, created 5/04/2006 11:34:22 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=5, 1, 0, 5, size=8832 bytes, created 5/04/2006 11:34:56 AM (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hi Z10!!! Curiously I Have the same Nero (version 7), the same burner (Pioneer)and the same problem. When I instaled the program his function was good but after a while it begging to present error messages. BURN PROCESS FAILED AT 16X. As you can imagine I wasted severals CDs. Are you found any solution? Please, I appreciate your help. Since you have the same program and the same burner as I'm, I think that we can communicate. Thank,Julio
Julvy, I haven't found a fix yet unfortunately. I'm cleaning up my hard-drive and will try again later. I'll keep you posted.
Hi, edit out your serial number at the top of your log before someone pirates it. your firmware presently is not up to date click http://www.pioneerelectronics.com/pna/article/0,,2076_4273_128163990,00.html use DVR-A06/106 and update to version 1.08 Your burner is in pio mode and needs to be in dma use this link as it has visual steps. http://www.burstcopy.com/dma/xp/ You will have to remove your current version of nero using nero cleantool http://ww2.nero.com/nero7/enu/InCD_CleanTool.html. Remember to include all remnants of nero using the tool, reboot and install the following: Nero 7.0.2.3 is said to have some bugs goto http://www.filehippo.com/download_nero_7_premium/ and download to the right version 7.0.8.2 which is the last known bug-free version of nero 7. This is nero incd packet writing software and doesn't play well with some systems also remove using nero cleantool and don't re-install when you load 7.0.8.2. Try turning some of your processes off as you using too much ram while trying to burn anything I missed there are many members here willing to assist you in correcting your issues so you can get up and burning. @juvly See my comments above on the version of nero the original post referenced. Are you trying to burn cds or dvds? If you are burning dvds then slow your burn speed down to 4x.
Matt, I followed all your instructions. However it still stops 1:00 into the burn process (I think for a different reason). I've been fiddling around with the settings for the past two hours, checking and re-checking everything. I've checked DMA is turned off (The system settings says it's turned off, but the log says otherwise). I chose not to install InCd, but it appears at the end of the log. I've also turned off as many system processes as possible (including explorer). I've wasted another 3 dvds in the process. Here's the log. Again, your help is very much appreciated. 4C82-xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 12:54:32 PM NT-SPTI used Nero Version: 7.0.8.2 Internal Version: 7, 0, 8, 2 (Nero Express) Recorder: <PIONEER DVD-RW DVR-106D>Version: 1.08 - HA 1 TA 0 - 7.0.8.2 Adapter driver: <IDE> HA 1 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <PIONEER DVD-RW DVR-106D>Version: 1.08 - HA 1 TA 0 - 7.0.8.2 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : PIONEER DVD-RW DVR-106D atapi Port 1 ID 1 DMA: Off === CDRom-Device-Map === PIONEER DVD-RW DVR-106D D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 511MB (523764kB) Free physical memory: 250MB (256820kB) Memory in use : 50 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 25.5.2006 ISO compilation 9:18:08 PM #1 Text 0 File Isodoc.cpp, Line 6423 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 9:18:09 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 72704KB of Memory 9:18:09 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 9:18:09 PM #4 Text 0 File Writer.cpp, Line 113 Writer D: PIONEER DVD-RW DVR-106D running 9:18:09 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 9:18:09 PM #6 Text 0 File Burncd.cpp, Line 3353 Turn on Disc-At-Once, using DVD media 9:18:10 PM #7 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2199103 (488:41.28, 4295MB) 9:18:10 PM #8 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 9:18:10 PM #9 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: PIONEER DVD-RW DVR-106D, Media type: DVD-R Disc Manufacturer: MCC 02 - RG20 Disc Application Code: 64, Disc Physical Code: 193 9:18:10 PM #10 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:18:10 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2199104 (2199104) = #2199104/488:41.29 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2199104 blocks [D: PIONEER DVD-RW DVR-106D] -------------------------------------------------------------- 9:18:10 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: PIONEER DVD-RW DVR-106D] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4503764992, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2199104 | lead-out | 1 | 0x41 | 0x00 9:18:10 PM #13 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 9:18:10 PM #14 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 9:18:10 PM #15 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 9:18:10 PM #16 Text 0 File Burncd.cpp, Line 4187 Cache writing successful. 9:18:10 PM #17 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 9:18:10 PM #18 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 4x (5,540 KB/s) 9:18:10 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 9:18:10 PM #20 Text 0 File DVDR.cpp, Line 2760 Recording mode: Sequential Recording Mode for Multisession 9:18:10 PM #21 Text 0 File DVDR.cpp, Line 2916 Start write address at LBA 0 DVD high compatibility mode: Yes 9:18:10 PM #22 Text 0 File Cdrdrv.cpp, Line 8661 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 9:18:24 PM #23 Text 0 File Cdrdrv.cpp, Line 1211 21:18:24.327 - D: PIONEER DVD-RW DVR-106D : Queue again later 9:19:28 PM #24 SPTI -1061 File SCSIPassThrough.cpp, Line 290 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1061) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x44 Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 03 00 00 00 20 00 00 00 Sense Area: 0x71 00 04 00 00 00 00 0E 00 00 00 00 44 Buffer x05e70000: Len x10000 0xFF FB 92 00 E9 8C E3 04 23 D0 1B 38 5A 50 61 04 0x9A 03 67 08 4A 0B F0 A7 40 6C 60 E9 81 7A 90 A7 0xCD AC 3D 29 1F 32 65 E9 95 81 21 61 8B 55 B2 E9 9:19:28 PM #25 CDR -1061 File Writer.cpp, Line 302 Internal target failure D: PIONEER DVD-RW DVR-106D 9:19:28 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 9:19:28 PM #27 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 9:19:28 PM #28 Text 0 File DVDR.cpp, Line 3156 EndDAO: Last written address was 767 9:19:28 PM #29 Phase 133 File dlgbrnst.cpp, Line 1730 Writing short lead-out 9:19:28 PM #30 SPTI -1176 File SCSIPassThrough.cpp, Line 290 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x04 CDB Data: 0x5B 01 02 00 00 03 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 72 04 9:19:28 PM #31 CDR -1176 File WriterStatus.cpp, Line 167 Session fixation error D: PIONEER DVD-RW DVR-106D 9:19:28 PM #32 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 9:19:28 PM #33 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\InCDfs.SYS': Ver=5, 1, 0, 5, size=102016 bytes, created 5/04/2006 11:34:04 AM (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hi, You installed incd or did not clear it via the cleantool before as the driver is still present in your log after you updated. Once again use the nero cleantool to uninstall only incd. Refer to the previous link I posted in reference to turning on your dma or http://home.comcast.net/~bbmayo/FAQ.htm and click the link under the FAQ question why is my drive running so slow now. By chance how old is this drive as per your log here and there is problems with nero recognizing your burner or incd is the varmint. I would suggest uninstalling nero again via the cleantool ensuring that at the bottom right you mark the check all box...reboot as it tells you when the cleaning is done and reinstall nero 6.6.0.18 (do this after you try to fix your dma issue first). I would get some blank dvdrw as not to waste dvds until your burn problems are solved. Forgot to ask what brand of media are you using..mcc is usually top notch if verbatim. I would try a different brand of media (sony or fuji MIJ)or if available in your area taiyo yuden media. I am still leaning on the burner is the overall issue.
As Matt72 has directed get your DMA turned on for this drive, if you still have errors there is something going on with the drive, this is a hardware error. Check your cables and make sure the are seated correctly. Also, try another brand of media and see if this works out.
Matt, I've gone through your instructions. I've unstalled and reinstalled Nero again, making sure to use InCd cleaner and relevant cleanup tools (Nero Cleaner, Registry Checker). I've unstalled and reinstalled my IDE channels making sure DMA is turned on. I've also checked cable and plug connections, and tried different media. My CD burner is over 5 years old. Any other suggestions? Here's the log: 4C82-xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 12:54:32 PM NT-SPTI used Nero Version: 7.0.8.2 Internal Version: 7, 0, 8, 2 (Nero Express) Recorder: <PIONEER DVD-RW DVR-106D>Version: 1.08 - HA 1 TA 0 - 7.0.8.2 Adapter driver: <IDE> HA 1 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <PIONEER DVD-RW DVR-106D>Version: 1.08 - HA 1 TA 0 - 7.0.8.2 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : PIONEER DVD-RW DVR-106D atapi Port 1 ID 1 DMA: Off === CDRom-Device-Map === PIONEER DVD-RW DVR-106D D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 511MB (523764kB) Free physical memory: 256MB (262432kB) Memory in use : 49 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.5.2006 ISO compilation 11:46:06 AM #1 Text 0 File Isodoc.cpp, Line 6423 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 11:46:07 AM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 72704KB of Memory 11:46:07 AM #3 Text 0 File Reader.cpp, Line 124 Reader running 11:46:07 AM #4 Text 0 File Writer.cpp, Line 113 Writer D: PIONEER DVD-RW DVR-106D running 11:46:07 AM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 11:46:07 AM #6 Text 0 File Burncd.cpp, Line 3353 Turn on Disc-At-Once, using DVD media 11:46:08 AM #7 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2209983 (491:06.33, 4316MB) 11:46:08 AM #8 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 11:46:08 AM #9 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: PIONEER DVD-RW DVR-106D, Media type: DVD-R Disc Manufacturer: MCC 02 - RG20 Disc Application Code: 64, Disc Physical Code: 193 11:46:08 AM #10 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:46:08 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2209984 (2209984) = #2209984/491:6.34 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2209984 blocks [D: PIONEER DVD-RW DVR-106D] -------------------------------------------------------------- 11:46:08 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: PIONEER DVD-RW DVR-106D] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4526047232, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2209984 | lead-out | 1 | 0x41 | 0x00 11:46:08 AM #13 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 11:46:08 AM #14 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 11:46:08 AM #15 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 11:46:08 AM #16 Text 0 File Burncd.cpp, Line 4187 Cache writing successful. 11:46:08 AM #17 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 11:46:08 AM #18 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 4x (5,540 KB/s) 11:46:08 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:46:08 AM #20 Text 0 File DVDR.cpp, Line 2760 Recording mode: Sequential Recording Mode for Multisession 11:46:08 AM #21 Text 0 File DVDR.cpp, Line 2916 Start write address at LBA 0 DVD high compatibility mode: Yes 11:46:08 AM #22 Text 0 File Cdrdrv.cpp, Line 8661 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 11:46:22 AM #23 Text 0 File Cdrdrv.cpp, Line 1211 11:46:22.437 - D: PIONEER DVD-RW DVR-106D : Queue again later 11:47:15 AM #24 SPTI -1 File SCSIPassThrough.cpp, Line 290 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1) Sense Key: 0x08 (KEY_BLANK_CHECK) Sense Code: 0x00 Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 03 00 00 00 20 00 00 00 Sense Area: 0xF1 00 08 FF FF 03 F0 0E 00 00 00 00 00 Buffer x05400000: Len x10000 0xB8 BB 0C F3 BC 39 4B 25 94 84 C2 B8 3C CD 5E E2 0x61 7C D5 69 79 9E 60 A4 E4 3D 44 6B F9 09 54 F2 0x11 16 72 1A 69 76 CA B6 A1 C1 DB E1 D3 71 31 01 11:47:15 AM #25 CDR -1 File Writer.cpp, Line 302 Unspecified Recorder Error D: PIONEER DVD-RW DVR-106D 11:47:15 AM #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:47:15 AM #27 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 11:47:15 AM #28 Text 0 File DVDR.cpp, Line 3156 EndDAO: Last written address was 767 11:47:15 AM #29 Phase 133 File dlgbrnst.cpp, Line 1730 Writing short lead-out 11:47:15 AM #30 SPTI -1176 File SCSIPassThrough.cpp, Line 290 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x04 CDB Data: 0x5B 01 02 00 00 03 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 72 04 11:47:15 AM #31 CDR -1176 File WriterStatus.cpp, Line 167 Session fixation error D: PIONEER DVD-RW DVR-106D 11:47:15 AM #32 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 11:47:15 AM #33 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 4x (5,540 KB/s) Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
For some reason your burner is not recognizing your media, you are using good media but I would try another brand such as Verbatim or Sony (made in japan) and see how it goes.
Hi z10 What other different media did you try besides the MCC id? You can also try a burn speed of 2x since 4x is the max for this drive. Another thing is yep it's an old burner and you DMA is still showing off. My guess is it could be because the drive is heading south or the cable is bad like arniebear suggested. So try picking up a new ide cable - 80 wire. If you end up getting a new drive (may be time too) you should get a new one anyhow.
Hi, Was involved with work issues but here is what I see Seems there is an issue with the recorder. After trying different media as suggested and still burning errors I would consider checking online at newegg.com (use google to find it) and price a new burner. Again I suggest a new burner might be the way to go as they run about 59 dollars these days. By the way I looked up your current burner and it writes at only 4x. If you switched media to 8x or 16x recently try to change back to 4x media. If not the case then see my recommendations above.
z10: i noticed all through the logs provided that your dma is still turned off,...............Is it not possible to turn it on due to the age of the burner