Nero Error "Illegal disc" & "Could not perform end of Disc-at-once"

Liqisaber · Aug 29, 2005

Ok sometimes I get cannot perform end disc at once and I have no idea what that means. Also, is it better to enable multisesson or not? Also, is it better to enable multisesson or not? And does illegal disk mean you do not have enough space?

Anyway heres the log.

1A20

Windows 2000 5.0
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
Nero version: 6.3.1.26 (Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A102 - HA 0 TA 0 - 6.3.1.26
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVDRAM GSA-4163B>Version: A102 - HA 0 TA 0 - 6.3.1.26
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 0 ID 0 DMA: Off
DiskPeripheral : WDC WD800BB-22JHA0 05.0 iteatapi Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4163 D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047852kB)
Free physical memory: 641MB (656660kB)
Memory in use : 37 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

29.8.2005
===== Disc-Copy over image - 1st step : Copy to image ...

5:25:41 AM #1 Text 0 File Reader.cpp, Line 126
Reader running

5:25:41 AM #2 Text 0 File Writer.cpp, Line 124
Writer Image Recorder running

5:25:41 AM #3 Text 0 File DVDCopy.cpp, Line 271
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 2286128 (gap 0) Blank 0 Res 0 Dmg 0 Mode TRM_DATA_MODE1 (0)

5:25:41 AM #4 Text 0 File DVDCopy.cpp, Line 374
Max -1 tracks of 1 allowed to copy
1: 0 - 2286128 = 2286128, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

5:25:41 AM #5 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using DVD media

5:25:41 AM #6 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2147483646 (477218:35.21, 4194303MB)
Last address to be written: 2286127 (508:01.52, 4465MB)

5:25:41 AM #7 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)

5:25:41 AM #8 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?

5:25:41 AM #9 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================

5:25:41 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [ Image Recorder ]
--------------------------------------------------------------

5:25:41 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4682297344, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286128 | lead-out | 1 | 0x00 | 0x41

5:25:41 AM #12 Phase 120 File dlgbrnst.cpp, Line 1855
Creating the image for burning

5:25:41 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

5:55:56 AM #14 Text 0 File WriterStatus.cpp, Line 115
< Image Recorder > start writing Lead-Out at LBA 2286128 (22E230h), lenght 0 blocks

5:55:56 AM #15 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

5:55:56 AM #16 Phase 121 File dlgbrnst.cpp, Line 1855
Creating Image completed successfully

===== Disc-Copy over image - 2nd step : Burn the image ...

5:56:03 AM #1 Text 0 File Reader.cpp, Line 126
Reader running

5:56:03 AM #2 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST DVDRAM GSA-4163B running

5:56:03 AM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 387330048
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=508:01.53 ( 2286128)
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\Administrator\My Documents\TempImage.nrg>

5:56:03 AM #4 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using DVD media

6:09:32 AM #5 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286127 (508:01.52, 4465MB)

6:09:32 AM #6 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)

6:09:32 AM #7 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R
Disc Manufacturer: TYG02 - T
Disc Application Code: 64, Disc Physical Code: 193

6:09:32 AM #8 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD+R9 Double Layer.)

6:09:32 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------

6:09:32 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286128 | lead-out | 1 | 0x00 | 0x41

6:09:32 AM #11 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 8x (11,080 KB/s)

6:09:32 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

6:09:32 AM #13 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 7:07,639 (427639ms) -> OK

6:09:32 AM #14 Text 0 File DVDR.cpp, Line 2020
Recording mode: Sequential Recording Mode

6:09:32 AM #15 Text 0 File Mmc.cpp, Line 20698
Set BUFE: supported -> ON

6:09:32 AM #16 Text 0 File DVDR.cpp, Line 2161
Start write address at LBA 0
DVD high compatibility mode: Yes

6:09:32 AM #17 Text 0 File Cdrdrv.cpp, Line 8228
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

6:09:32 AM #18 Text 0 File DVDR.cpp, Line 4643
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request: DVD-ROM
Book Type setting not supported for the loaded disc type

6:09:54 AM #19 Text 0 File Cdrdrv.cpp, Line 1297
06:09:54.000 - HL-DT-ST DVDRAM GSA-4163B\H0 T0 : Queue again later

6:10:29 AM #20 SCSI -1093 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x0B6B0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x37 0x20 0x00 0x0C 0x02 0x00

6:10:29 AM #21 CDR -1093 File Writer.cpp, Line 304
No seek complete

6:10:29 AM #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

6:10:29 AM #23 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

6:10:29 AM #24 Text 0 File DVDR.cpp, Line 2403
EndDAO: Last written address was 607

6:10:29 AM #25 Text 0 File DVDR.cpp, Line 4643
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request: DVD+R
Book Type setting not supported for the loaded disc type

6:10:29 AM #26 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

6:10:29 AM #27 CDR -1093 File WriterStatus.cpp, Line 164
No seek complete

6:10:29 AM #28 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once

6:10:29 AM #29 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

6:10:29 AM #30 Phase 38 File dlgbrnst.cpp, Line 1855
Burn process failed at 8x (11,080 KB/s)

Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 8/26/2005 7:47:22 AM
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 8/26/2005 7:47:22 AM
File 'Drivers\InCDfs.SYS': Ver=4, 2, 12, 1, size=91136 bytes, created 9/7/2004 4:27:22 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 12, 1, size=28544 bytes, created 9/7/2004 4:27:38 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 12, 1, size=5760 bytes, created 9/7/2004 4:29:08 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 6/19/2003 3:05:04 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

creaky · Aug 31, 2005

@Liqisaber -

Also, is it better to enable multisesson or not?
Click to expand...

- the easiest way to explain this, is if you don't know what it is you probably don't need it. for more info see here - http://www.roxio.com/en/support/cdr/multisession.html

And does illegal disk mean you do not have enough space?
Click to expand...

- no. and in your case it looks like a combination of loads of things needing tweaking/updating. It could also be down to fake discs.....

Nero version: 6.3.1.26 (Nero Express)
Click to expand...

- too old, latest is 6.6.0.16. update Nero

Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A102
Click to expand...

- firmware is 3 versions behind, A105 is here - http://forum.rpc1.org/dl_firmware.php?download_id=1973

CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 0 ID 0 DMA: Off
DiskPeripheral : WDC WD800BB-22JHA0 05.0 iteatapi Port 3 ID 0 DMA: Off
Click to expand...

- DMA needs to be ON. Fix it via this - http://home.comcast.net/~bbmayo/FAQ.htm

Last possible write address on media: 2147483646 (477218:35.21, 4194303MB)
Last address to be written: 2286127 (508:01.52, 4465MB)
Click to expand...

- 2 problems here (this is the disc you're copying from). Firstly, the first line has some stupidly large made up figure as it either can't work out the size of the disc due to Nero being too old, or due to crap media (or both). Secondly, the second line shows the original disc (disc you're copying from) was burnt too close to outer edge of the disc. If you use DVD Shrink, avoid this in future by setting target size in Shrink's preferences to 4300MB, thus avoiding outer edge of discs and not sacrificing much space.

Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?
Click to expand...

- i think this suggests crap media

Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286127 (508:01.52, 4465MB)
Click to expand...

- again, you're burning too close to outer edge of discs. set target size in Shrink's preferences as stated above.

Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R
Disc Manufacturer: TYG02 - T
Disc Application Code: 64, Disc Physical Code: 193
Click to expand...

- hmmmm, are these authentic Taiyo Yuden discs (TY) or FAKES ?. to establish if they're genuine, see here - http://forums.afterdawn.com/thread_view.cfm/225272

Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request: DVD-ROM
Book Type setting not supported for the loaded disc type

Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request: DVD+R
Book Type setting not supported for the loaded disc type
Click to expand...

- you can't booktype -R discs, only +R discs (and only then if your burner supports booktyping, otherwise known as bitsetting)

Sense Key: 0x03 (KEY_MEDIUM_ERROR)

No seek complete
Click to expand...

- follow my suggestions and verify whether the TY discs are authentic, and hopefully we'll get you burning again

Burn process failed at 8x (11,080 KB/s)
Click to expand...

- most people recommend 4x

Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 8/26/2005 7:47:22 AM
File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 8/26/2005 7:47:22 AM
File 'Drivers\InCDfs.SYS': Ver=4, 2, 12, 1, size=91136 bytes, created 9/7/2004 4:27:22 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 12, 1, size=28544 bytes, created 9/7/2004 4:27:38 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 12, 1, size=5760 bytes, created 9/7/2004 4:29:08 PM (InCD4 driver for win NT/2K/XP)
Click to expand...

- you have Roxio software installed (the first 2 CDR* lines in the paragraph). Roxio and Nero don't always play well together. You also have InCD installed, this is Nero's 'packet writing' software (it's explained in that link up top of my reply re multisession), if you don't use packet writing which it sounds like you don't, then get rid of it. Nero is in dire need of up andate anyway, uninstal Nero, uninstall completely via Nero Clean Tools - " http://www.nero.com/en/Clean_Tools.html ", then install 6.6.0.16, but DO NOT install Nero's InCD. Also, to fully remove Roxio, you may need to google search for Roxio Zapper..

Liqisaber · Aug 30, 2005

Hey thanks for helping creaky. The disc I was using was hyundai, ran out of memorex. But it looks like verbatim is one of the best media, talking about media I wasn't using YT.

I can enable DMA mode when trying to burn it asks me. I was wondering if DMA mode could mess up your computers registry causing it not to boot up? Just got this thought because everytime I had DMA mode on (twice) I had to reformat my computer about 2 months after each time. But now it isn't enabled and my computer is fine and I haven't needed to reformat in a long time. Just a odd coincidence.

And... I won't need packet writing if I just burn cds or use data disc?

Also for the firmware this is the one I want correct?

Sat Dec 28, 2002 2:46 pm LG/HLDS GCA-4020B
-LG/HLDS/Goldstar GCA-4020B - A107
(Known firmware : A102 / A103 / A105)
Region Free (RPC-1) firmware is available here. Patched by The Dangerous Brothers.
RPC-2

Thanks for your help.

Edited by: dhc014 Last update: Sat Feb 28, 2004 5:45 pm

Burn-it · Aug 30, 2005

Thanks for the help guys.

My issue turned out to be a bad cable... I think. I have an external burner using a Firewire to iLink cable to my laptop. The wire is brand new and came with the Sony burner. I am now using a USB cable that also came with the burner and have been burning fine.

creaky · Aug 31, 2005

@Liqisaber -

Avoid the Hyundai and Memorex, stick to the good stuff such as Verbatim [bold]datalifeplus[/bold]

had got the firmware link slightly wrong, it's here and have corrected it in precious reply -
http://forum.rpc1.org/dl_firmware.php?download_id=1973

the easiest way to explain re packet writing is that if you don't know what it is, you definitely don't need it..

Dunno what to say about your DMA at the moment... have you got the driver cd/disc that came with your motherboard/PC ?

@Burn-it - cool, happy burning

camuffo · Sep 7, 2005

Hi.
I'm a newbie in writing DVDs.
When I burn Dvd using TDK or MMORE I got the message "Illegal Disk" and "Could not perform end of Disk at once". Strangely enough, when I use Imation DVD (that in one of your threads are described as pure crap)I have no problem. I burn using my Fujitsu Siemens laptop, that has a Combo CD DVD burner. The DVD burner is a Ricoh DVD+RW RW8165. The firmware should be updated (I have the 1.03 version).

Here's my logfile (using MMORE):
User

1A20-

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\PROGRA~1\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18.35.34
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: < DVD+RW RW8165> Version: 1.03 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: < DVD+RW RW8165 >Version: 1.03 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK4025GAS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVD+RW RW8165 atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
DVD+RW RW8165 D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523628kB)
Free physical memory: 334MB (342888kB)
Memory in use : 34 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.9.2005
ISO compilation
10.34.55 #1 Text 0 File Isodoc.cpp, Line 6356
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10.34.55 #2 Text 0 File Reader.cpp, Line 127
Reader running

10.34.55 #3 Text 0 File Writer.cpp, Line 122
Writer DVD+RW RW8165 running

10.34.55 #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

10.34.55 #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

10.34.55 #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2293455 (509:39.30, 4479MB)

10.34.55 #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD DVD)

10.34.55 #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: DVD+RW RW8165, Media type: DVD+R

10.34.55 #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10.34.55 #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2293456 (2293456) = #2293456/509:39.31
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2293456 blocks [DVD+RW RW8165]
--------------------------------------------------------------

10.35.04 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [DVD+RW RW8165] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4696997888, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2293456 | lead-out | 1 | 0x41 | 0x00

10.35.04 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

10.35.04 #13 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

10.35.04 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

10.35.04 #15 Phase 28 File dlgbrnst.cpp, Line 1832
Speed measurement started

10.35.04 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10.39.46 #17 Text 0 File WriterStatus.cpp, Line 116
< DVD+RW RW8165 > start writing Lead-Out at LBA 2293456 (22FED0h), lenght 0 blocks

10.39.47 #18 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10.39.47 #19 Phase 29 File dlgbrnst.cpp, Line 1781
Speed measurement completed: 11.9x (16.442 KB/s)

10.39.47 #20 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5.540 KB/s)

10.39.48 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10.39.48 #22 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04CA0600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00

10.39.48 #23 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 0x15 0xA1 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00

10.39.49 #24 Text 0 File DVDR.cpp, Line 5896
Drive: DVD+RW RW8165
Book Type request [gen]: Physical disc type, write to EEPROM
Changing the Book Type was finished successfully, return code 0

10.39.49 #25 CDR -1207 File DVDR.cpp, Line 5065
Book Type automatically set to: Physical disc type

10.39.49 #26 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes

10.40.14 #27 SCSI -1046 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04310000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x30 0x05

10.40.14 #28 CDR -1046 File Writer.cpp, Line 311
Illegal disc

10.40.14 #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10.40.14 #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

10.40.14 #31 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00

10.40.14 #32 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders

10.40.14 #33 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 0x15 0xA1 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00

10.40.14 #34 Text 0 File DVDR.cpp, Line 5896
Drive: DVD+RW RW8165
Book Type request [gen]: DVD+R, write to EEPROM
Changing the Book Type was finished successfully, return code 0

10.40.14 #35 CDR -1066 File WriterStatus.cpp, Line 167
Invalid field in command

10.40.14 #36 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

10.40.14 #37 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5.540 KB/s)

Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 25/07/2005 11.53.28 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 25/07/2005 11.53.04 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 25/07/2005 11.53.30 (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 7.59.42 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

camuffo · Sep 5, 2005

I forgot to give further informations.
I use 8x one layer DVDs.
In one of your previous replies I've found that probably I start my burning too close to the edge:
(Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2293455 (509:39.30, 4479MB)

How can I change this setting?

Thanks a lot

camuffo · Sep 5, 2005

Ok. Stupid question. I just have to put less data in the DVD. What is a safe amount 4.3 Gb, 4.4GB ?

creaky · Sep 5, 2005

@camuffo - hi.....

1A20-********************
Click to expand...

- EDIT OUT your serial number, it's probably been stolen by now

Recorder: < DVD+RW RW8165> Version: 1.03
Click to expand...

- your firmware seems to be up to date

Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2293455 (509:39.30, 4479MB)
Click to expand...

- see that 4479MB in that 2nd line - you're burning way too close to outer edge of discs. set target size in DVD Shrink's preferences to 4300MB, thus avoiding outer edge of discs and not sacrificing much space.

Recorder: DVD+RW RW8165, Media type: DVD+R
Click to expand...

- while your firmware does seem to be up to date, it's not recognising your discs correctly. The media must be newer than your burner's firmware knows what to do with. you're using 8x discs, and as far as i'm aware this burner can only do 4x max (can't find the link at the moment) in which case that might explain why it doesn't recognise the 8x discs

Illegal disc

Invalid field in command

Burn process failed at 4x (5.540 KB/s)
Click to expand...

- with no newer firmware out there, for you to update to, you're going to keep having problems with these discs, as the burner isn't equipped (in it's firmware) to know what to do with the discs correctly

Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 25/07/2005 11.53.28 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 25/07/2005 11.53.04 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 25/07/2005 11.53.30 (InCD4 driver for win NT/2K/XP)
Click to expand...

- you have Nero's InCD installed. It's 'packet writing' software and doesn't always play well with standard Nero Burning Rom. Uninstall Nero, uninstall completely via Nero'c Clean Tools - " http://www.nero.com/en/Clean_Tools.html ", then reinstall Nero WITHOUT installing InCD

camuffo · Sep 7, 2005

Thanks creaky!

After reading your answer I went to a store, but I didn't find any 4X DVD.

I guess I'll have problems forever.

camuffo · Sep 7, 2005

Now it doesn't work also with imation.

I've tried verbatim 8X and it worked, but with TX failed. I uninstalled INCD with InCD-CleanTool.

Here's the tx failure logfile:

User

1A20-

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\PROGRA~1\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18.35.34
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: < DVD+RW RW8165> Version: 1.03 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: < DVD+RW RW8165 >Version: 1.03 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK4025GAS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVD+RW RW8165 atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
DVD+RW RW8165 D: CDRom0
=======================

AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523628kB)
Free physical memory: 249MB (255156kB)
Memory in use : 51 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

7.9.2005
ISO compilation
11.35.51 #1 Text 0 File Isodoc.cpp, Line 6356
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

11.35.51 #2 Text 0 File Reader.cpp, Line 127
Reader running

11.35.51 #3 Text 0 File Writer.cpp, Line 122
Writer DVD+RW RW8165 running

11.35.51 #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

11.35.51 #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

11.35.51 #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2192671 (487:15.46, 4282MB)

11.35.51 #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

11.35.51 #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: DVD+RW RW8165, Media type: DVD+R

11.35.51 #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11.35.51 #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2192672 (2192672) = #2192672/487:15.47
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2192672 blocks [DVD+RW RW8165]
--------------------------------------------------------------

11.35.51 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [DVD+RW RW8165] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4490592256, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2192672 | lead-out | 1 | 0x41 | 0x00

11.35.52 #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

11.35.52 #13 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

11.35.52 #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

11.35.52 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5.540 KB/s)

11.35.52 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11.35.52 #17 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x08740600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00

11.35.52 #18 SCSI -1066 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00

11.35.52 #19 Text 0 File DVDR.cpp, Line 5896
Drive: DVD+RW RW8165
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0

11.35.52 #20 CDR -1211 File DVDR.cpp, Line 5056
Book Type set to: DVD-ROM

11.35.52 #21 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes

11.44.53 #22 SCSI -1046 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x081A0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x0B 0x0B 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x0B 0x01 0xB0 0x0C
0x00 0x00 0x00 0x00 0x30 0x05

11.44.53 #23 CDR -1046 File Writer.cpp, Line 311
Illegal disc

11.44.53 #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11.44.53 #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

11.44.54 #26 SCSI -1046 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x05 0x00 0x0B 0x01 0xB0 0x0C
0x00 0x00 0x00 0x00 0x30 0x05

11.44.54 #27 SCSI -1176 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x039D5200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x72 0x03

11.44.54 #28 CDR -1046 File WriterStatus.cpp, Line 167
Illegal disc
DVD+RW RW8165\H1 T0

11.44.54 #29 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

11.44.54 #30 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5.540 KB/s)

Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 7.59.42 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

THANKS IN ADVANCE

creaky · Sep 7, 2005

no loss with the imation

Recorder: DVD+RW RW8165, Media type: DVD+R
Click to expand...

same again, media is not fully recognised...

i was trying to find a recommended media list for this drive but google has hardly any info on this drive at all.... then we'd know what media you could buy and be sure it would work..

camuffo · Sep 7, 2005

creaky,

Thanks a lot again for your help !!!

DVDStomp · Sep 12, 2005

I was also getting a ""Could not perform start of Disc-at-once" error - it would happen right away before anything could actually be written to the disc. I was using the memorex DVD+R DL media. My Nero version was 6.6.0.6 - so I downloaded and installed the 6.6.0.16 update from their website. It did make a difference; however it still didnt work - I was just getting a different error message: "Illegal Disc". I also downloaded a firmware update for my burner - NEC ND-3500A - if you have one of these - their website is actually pretty user friendly and I was able to find the correct doanload quickly. The weird thing was that the currently installed firmware version was 2.16 and the update that I downloaded was 2.1A - i wasnt sure which one was supposed to be newer. But the flash software is actually supposed to tell you if you have the latest version or if the version installed is newer that the one you are trying to put on it. After installing the 2.1A firmware I was able to burn a DVD-Video project successfully.

lilhd · Nov 18, 2005

i have the same problem please help. i used the test version of nero 7

aaaaaa
aaaaa

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2-11-2004 12:54:32

NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2
(Nero Express)
Recorder: <_NEC DVD_RW ND-1300A> Version: 1.07 - HA 1 TA 1 - 7.0.1.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SONY DVD-ROM DDU1612 >Version: DYS1 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD-ROM DDU1612 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
SONY DVD-ROM DDU1612 D: CDRom0
_NEC DVD_RW ND-1300A E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523756kB)
Free physical memory: 290MB (297116kB)
Memory in use : 43 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

16.11.2005
ISO compilation
20:35:32 #1 Text 0 File Isodoc.cpp, Line 6411
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

20:35:32 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory

20:35:32 #3 Text 0 File Reader.cpp, Line 124
Reader running

20:35:32 #4 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

20:35:32 #5 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media

20:35:32 #6 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 558479 (124:06.29, 1090MB)

20:35:32 #7 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)

20:35:32 #8 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R
Disc Manufacturer: OPTODI - SCR004
Disc Application Code: 64, Disc Physical Code: 193

20:35:32 #9 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================

20:35:32 #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 558480 (558480) = #558480/124:6.30
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 558480 blocks [E: _NEC DVD_RW ND-1300A]
--------------------------------------------------------------

20:35:32 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: _NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1143767040, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
558480 | lead-out | 1 | 0x41 | 0x00

20:35:32 #12 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

20:35:32 #13 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started

20:35:32 #14 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.

20:35:32 #15 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed

20:35:32 #16 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 2.4x (3.324 KB/s)

20:35:32 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

20:35:32 #18 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode for Multisession

20:35:32 #19 Text 0 File MMC.cpp, Line 21611
Set BUFE: Buffer underrun protection -> ON

20:35:32 #20 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes

20:35:32 #21 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-ROM (0), Part Version: 0.9x (0)
Disc Size: 120 mm, Maximum Rate: 2,52 Mbps (0 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: ?
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 0 h (?)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

20:35:32 #22 SPTI -1046 File SCSIPassThrough.cpp, Line 323
E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 00 00 00 00 00 08 85 90 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05

20:35:32 #23 CDR -1046 File ThreadedTransferInterface.cpp, Line 1799
Illegal disc
E: _NEC DVD_RW ND-1300A

20:35:32 #24 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799
Could not perform start of Disc-at-once

20:35:32 #25 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 2.4x (3.324 KB/s)

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Click to expand...

creaky · Nov 18, 2005

@lilhd -

Recorder: <_NEC DVD_RW ND-1300A> Version: 1.07
Click to expand...

- your burner's firmware is a fair few versions behind, 1.0C is here - http://forum.rpc1.org/dl_firmware.php?download_id=1517

Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R
Disc Manufacturer: OPTODI - SCR004
Disc Application Code: 64, Disc Physical Code: 193
Click to expand...

- not very good media at all, get decent media

Illegal disc
Click to expand...

- see previous comments

lilhd · Nov 18, 2005

[..]
[23:38:58] <---MT---> Quality: Standard play (5073 kbps)
[23:38:58] <---MT---> Resolution: 704 x 576 (D1)
[23:38:58] <---MT---> Audio SmartEncoding ratio: 0.0 %
[23:38:58] <---MT---> Video SmartEncoding ratio: 0.0 %
[23:38:58] <---MT---> Number of menus: 1
[23:38:58] <---MT---> - Main menu (2 pages)
[23:38:58]
[23:38:58] <---MT---> Windows XP 5.1
[23:38:58] <---MT---> IA32
[23:38:58] <---MT---> WinAspi: -
[23:38:58] <---MT---> ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2-11-2004 12:54:32
[23:38:58] <---MT---> NT-SPTI used
[23:38:58] <---MT---> Nero API version: 7.0.1.2
[23:38:58] <---MT---> Using interface version: 7.0.0.0
[23:38:58] <---MT---> Installed in: C:\Program Files\Nero\Nero 7\Core\
[23:38:58] <---MT---> Application: ahead\NeroVision
[23:38:58] <---MT---> Internal Version: 7, 0, 1, 2
[23:38:58] <---MT---> Recorder: <_NEC DVD_RW ND-1300A> Version: 1.07 - HA 1 TA 1 - 7.0.1.2
[23:38:58] <---MT---> Adapter driver: <IDE> HA 1
[23:38:58] <---MT---> Drive buffer : 2048kB
[23:38:58] <---MT---> Bus Type : default (0) -> ATAPI, detected: ?
[23:38:58] <---MT---> === Scsi-Device-Map ===
[23:38:58] <---MT---> DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On
[23:38:58] <---MT---> CdRomPeripheral : SONY DVD-ROM DDU1612 atapi Port 1 ID 0 DMA: On
[23:38:58] <---MT---> CdRomPeripheral : _NEC DVD_RW ND-1300A atapi Port 1 ID 1 DMA: On
[23:38:58] <---MT---> === CDRom-Device-Map ===
[23:38:58] <---MT---> SONY DVD-ROM DDU1612 D: CDRom0
[23:38:58] <---MT---> _NEC DVD_RW ND-1300A E: CDRom1
[23:38:58] <---MT---> =======================
[23:38:58] <---MT---> AutoRun : 1
[23:38:58] <---MT---> Excluded drive IDs:
[23:38:58] <---MT---> WriteBufferSize: 74448896 (0) Byte
[23:38:58] <---MT---> ShowDrvBufStat : 0
[23:38:58] <---MT---> BUFE : 0
[23:38:58] <---MT---> Physical memory : 511MB (523756kB)
[23:38:58] <---MT---> Free physical memory: 249MB (255652kB)
[23:38:58] <---MT---> Memory in use : 51 %
[23:38:58] <---MT---> Uncached PFiles: 0x0
[23:38:58] <---MT---> Use Inquiry : 1
[23:38:58] <---MT---> Global Bus Type: default (0)
[23:38:58] <---MT---> Check supported media : Disabled (0)
[23:38:58] <---MT---> 17.11.2005
[23:38:58] <---MT---> NeroAPI
[23:38:58] <---MT---> 23:38:55 #1 Phase 111 File APIProgress.cpp, Line 278
[23:38:58] <---MT---> DVD-Video files sorted
[23:38:58] <---MT--->
[23:38:58] <---MT---> 23:38:55 #2 Text 0 File ThreadedTransfer.cpp, Line 525
[23:38:58] <---MT---> ReadBuffer-Pipe got 262144KB of Memory
[23:38:58] <---MT--->
[23:38:58] <---MT---> 23:38:55 #3 Text 0 File Reader.cpp, Line 124
[23:38:58] <---MT---> Reader running
[23:38:58] <---MT--->
[23:38:58] <---MT---> 23:38:55 #4 ISO9660GEN -11 File Geniso.cpp, Line 3312
[23:38:58] <---MT---> First writeable address = 0 (0x00000000)
[23:38:58] <---MT--->
[23:38:58] <---MT---> 23:38:55 #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
[23:38:58] <---MT---> First writeable address = 0 (0x00000000)
[23:38:58] <---MT--->
[23:38:58] <---MT---> 23:38:55 #6 Text 0 File Burncd.cpp, Line 3302
[23:38:58] <---MT---> Turn on Disc-At-Once, using DVD media
[23:38:58] <---MT--->
[23:38:58] <---MT---> 23:38:56 #7 Text 0 File DlgWaitCD.cpp, Line 279
[23:38:58] <---MT---> Last possible write address on media: 2298495 (510:46.45, 4489MB)
[23:38:58] <---MT---> Last address to be written: 529343 (117:37.68, 1033MB)
[23:38:58] <---MT--->
[23:38:58] <---MT---> 23:38:56 #8 Text 0 File DlgWaitCD.cpp, Line 291
[23:38:58] <---MT---> Write in overburning mode: NO (enabled: CD)
[23:38:58] <---MT--->
[23:38:58] <---MT---> 23:38:56 #9 Text 0 File DlgWaitCD.cpp, Line 2578
[23:38:58] <---MT---> Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R
[23:38:58] <---MT---> Disc Manufacturer: OPTODI - SCR004
[23:38:58] <---MT---> Disc Application Code: 64, Disc Physical Code: 193
[23:38:58] <---MT--->
[23:38:58] <---MT---> 23:38:56 #10 Text 0 File DlgWaitCD.cpp, Line 458
[23:38:58] <---MT---> >>> Protocol of DlgWaitCD activities: <<<
[23:38:58] <---MT---> =========================================
[23:38:58] <---MT--->
[23:38:58] <---MT---> 23:38:56 #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
[23:38:58] <---MT---> Setup items (after recorder preparation)
[23:38:58] <---MT---> 0: TRM_DATA_MODE1 ()
[23:38:58] <---MT---> 2 indices, index0 (150) not provided
[23:38:58] <---MT---> original disc pos #0 + 529344 (529344) = #529344/117:37.69
[23:38:58] <---MT---> relocatable, disc pos for caching/writing not required/ required, no patch infos
[23:38:58] <---MT---> -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 529344 blocks [E: _NEC DVD_RW ND-1300A]
[23:38:58] <---MT---> --------------------------------------------------------------
[23:38:58] <---MT--->
[23:38:58] <---MT---> 23:38:56 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
[23:38:58] <---MT---> Prepare recorder [E: _NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
[23:38:58] <---MT---> DAO infos:
[23:38:58] <---MT---> ==========
[23:38:58] <---MT---> MCN: ""
[23:38:58] <---MT---> TOCType: 0x00; Session Closed, disc fixated
[23:38:58] <---MT---> Tracks 1 to 1:
[23:38:58] <---MT---> 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1084096512, ISRC ""
[23:38:58] <---MT---> DAO layout:
[23:38:58] <---MT---> ===========
[23:38:58] <---MT---> __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
[23:38:58] <---MT---> 0 | lead-in | 0 | 0x41 | 0x00
[23:38:58] <---MT---> 0 | 1 | 0 | 0x41 | 0x00
[23:38:58] <---MT---> 0 | 1 | 1 | 0x41 | 0x00
[23:38:58] <---MT---> 529344 | lead-out | 1 | 0x41 | 0x00
[23:38:58] <---MT--->
[23:38:58] <---MT---> 23:38:56 #13 Text 0 File SCSIPassThrough.cpp, Line 36
[23:38:58] <---MT---> SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
[23:38:58] <---MT--->
[23:38:58] <---MT---> 23:38:56 #14 Phase 24 File APIProgress.cpp, Line 278
[23:38:58] <---MT---> Caching of files started
[23:38:58] <---MT--->
[23:38:58] <---MT---> 23:38:56 #15 Text 0 File Burncd.cpp, Line 4132
[23:38:58] <---MT---> Cache writing successful.
[23:38:58] <---MT--->
[23:38:58] <---MT---> 23:38:56 #16 Phase 25 File APIProgress.cpp, Line 278
[23:38:58] <---MT---> Caching of files completed
[23:38:58] <---MT--->
[23:38:58] <---MT---> 23:38:56 #17 Phase 36 File APIProgress.cpp, Line 278
[23:38:58] <---MT---> Burn process started at 2.4x (3.324 KB/s)
[23:38:58] <---MT--->
[23:38:58] <---MT---> 23:38:56 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2685
[23:38:58] <---MT---> Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
[23:38:58] <---MT--->
[23:38:58] <---MT---> 23:38:56 #19 Text 0 File DVDR.cpp, Line 2580
[23:38:58] <---MT---> Recording mode: Sequential Recording Mode
[23:38:58] <---MT--->
[23:38:58] <---MT---> 23:38:56 #20 Text 0 File MMC.cpp, Line 21611
[23:38:58] <---MT---> Set BUFE: Buffer underrun protection -> ON
[23:38:58] <---MT--->
[23:38:58] <---MT---> 23:38:56 #21 Text 0 File DVDR.cpp, Line 2735
[23:38:58] <---MT---> Start write address at LBA 0
[23:38:58] <---MT---> DVD high compatibility mode: Yes
[23:38:58] <---MT--->
[23:38:58] <---MT---> 23:38:56 #22 Text 0 File Cdrdrv.cpp, Line 8411
[23:38:58] <---MT---> ---- DVD Structure: Physical Format Information (00h) ----
[23:38:58] <---MT---> Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
[23:38:58] <---MT---> Book Type: DVD-ROM (0), Part Version: 0.9x (0)
[23:38:58] <---MT---> Disc Size: 120 mm, Maximum Rate: 2,52 Mbps (0 h)
[23:38:58] <---MT---> Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: ?
[23:38:58] <---MT---> Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
[23:38:58] <---MT---> Starting Physical Sector Number of Data Area: 0 h (?)
[23:38:58] <---MT---> End Physical Sector Number of Data Area: 0 h
[23:38:58] <---MT---> End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
[23:38:58] <---MT---> Data in Burst Cutting Area (BCA) does not exist
[23:38:58] <---MT---> Media Specific [16..63]:
[23:38:58] <---MT---> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
[23:38:58] <---MT---> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
[23:38:58] <---MT---> 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
[23:38:58] <---MT--->
[23:38:58] <---MT---> 23:38:56 #23 SPTI -1046 File SCSIPassThrough.cpp, Line 323
[23:38:58] <---MT---> E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
[23:38:58] <---MT---> Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
[23:38:58] <---MT---> Sense Code: 0x30
[23:38:58] <---MT---> Sense Qual: 0x05
[23:38:58] <---MT---> CDB Data: 0x53 00 00 00 00 00 08 13 C0 00 00 00
[23:38:58] <---MT---> Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05
[23:38:58] <---MT--->
[23:38:58] <---MT---> 23:38:56 #24 CDR -1046 File ThreadedTransferInterface.cpp, Line 1799
[23:38:58] <---MT---> Illegal disc
[23:38:58] <---MT---> E: _NEC DVD_RW ND-1300A
[23:38:58] <---MT--->
[23:38:58] <---MT---> 23:38:56 #25 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799
[23:38:58] <---MT---> Could not perform start of Disc-at-once
[23:38:58] <---MT--->
[23:38:58] <---MT---> 23:38:56 #26 Phase 38 File APIProgress.cpp, Line 278
[23:38:58] <---MT---> Burn process failed at 2.4x (3.324 KB/s)
[23:38:58] <---MT--->
[23:38:58] <---MT---> Existing drivers:
[23:38:58] <---MT---> Registry Keys:
[23:38:58] <---MT---> HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Click to expand...

creaky · Nov 18, 2005

@lilhd -

[23:38:58] NeroVision 1C83-*******************
Click to expand...

- EDIT OUT your serial number

from the new logfile i've answered the things i can see wrong in your setup in my previous reply...

lilhd · Nov 18, 2005

not very good media at all, get decent media
Click to expand...

i thought EMTEC was a good brand... :-(

creaky · Nov 18, 2005

i've used some of them, brother bought me a tub last Christmas. they all burnt fine and i've rarely had the need or want to recopy any of them so don't know how good they really are. come to think of it i have only watched a couple of those since burning...

they're generally not though of as much good. get your firmware up to date and see how you get on with them. if you still have problems try some better discs.

what i've noticed with the ones i have is that the dye does not reach the very edge of the discs, like a centimetre away from edge of the discs is see-thru. i permanently only burn to 4300MB anyway thus i always miss edge of discs however if the dye is like this at the edge of discs i'd be concerned as to quality throughout rest of disc....

Log in or Sign up

Nero Error "Illegal disc" & "Could not perform end of Disc-at-once"

Liqisaber Guest

creaky Moderator Staff Member

Liqisaber Guest

Burn-it Member

creaky Moderator Staff Member

camuffo Guest

camuffo Guest

camuffo Guest

creaky Moderator Staff Member

camuffo Guest

camuffo Guest

creaky Moderator Staff Member

camuffo Guest

DVDStomp Member

lilhd Member

creaky Moderator Staff Member

lilhd Member

creaky Moderator Staff Member

lilhd Member

creaky Moderator Staff Member

Share This Page

Log in or Sign up

Nero Error "Illegal disc" & "Could not perform end of Disc-at-once"

Liqisaber Guest

creaky Moderator Staff Member

Liqisaber Guest

Burn-it Member

creaky Moderator Staff Member

camuffo Guest

camuffo Guest

camuffo Guest

creaky Moderator Staff Member

camuffo Guest

camuffo Guest

creaky Moderator Staff Member

camuffo Guest

DVDStomp Member

lilhd Member

creaky Moderator Staff Member

lilhd Member

creaky Moderator Staff Member

lilhd Member

creaky Moderator Staff Member

Share This Page

Useful Searches