1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Nero error - illegal disc

Discussion in 'Nero discussion' started by zebra2321, Mar 26, 2006.

  1. zebra2321

    zebra2321 Member

    Joined:
    May 29, 2005
    Messages:
    18
    Likes Received:
    0
    Trophy Points:
    11
    Im getting this error, just updated my Nero to 6.6.1.4 but didnt fix it. Previously was using Maxell DVD-R which worked fine, but have now switched to Memorex DVD-R up to 16x. I tried burning on 1x, 2x, and 2.4x. Nero and my burner detect the disc is there and empty, but the burn never works. Here is the error log:

    Initially my burner wouldnt deal with -R dvd's but I flashed on a "cracked (maybe)" firmware to make it able to. The DELL firmware it came with didn't allow it to burn -R, but the drive itself is capable of +/- R and dual layer. As a result, using an updated firmware from Dell or other official source worries me that I will lose the ability to burn -R's. Maybe the problem isnt even the firmware tho.

    I'm not sure how to check which firmware im using at the moment, I think it is 2.18 as I see that in the "details" tab of properties of my burner. Would any of these, especially the Dell OEM, work for me:

    http://forum.rpc1.org/dl_firmware.php?download_id=1837

    ===============================================

    Just tried again using DVD shrink to run Nero, and got this:
     
    Last edited: Mar 26, 2006
  2. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    @zebra2321
    Your firmware is update - 2.18 is correct and the latest one. I don't think your issue is there. Flashing the firmware from the source you link to from is fine.
    Your using up quite a bit of memory - free up some by shutting down any unnecesary processes.
    Those Memorex are made by Ritek - one of the better manufacturers for Memorex - but not the greatest. More than likely the reason for your illegal disc error. Your better off imho using the made in Japan Maxells, Fuji or Sony. Also Verbatim is good. All these are quality media. These should solve your problem.
    Your dvd rom is also not in dma mode - switch that back. Here's a guide if needed:
    http://my.afterdawn.com/alkohol/blog_entry.cfm/231/dmaissues
    Now the TRF error - well that's cause 6.6.1.4 broke the auto burn connection with Shrink. So go back a version. Uninstall 6.6.1.4, run the nero clean tool then install 6.6.0.18. Here's some links:
    http://ww2.nero.com/nero6/en/Clean_Tools.html
    http://httpdl2.usw.nero.com/Nero-6.6.0.18.exe
     
    Last edited: Mar 26, 2006
  3. zebra2321

    zebra2321 Member

    Joined:
    May 29, 2005
    Messages:
    18
    Likes Received:
    0
    Trophy Points:
    11
    So those 100 discs are coasters now?

    Followed the DMA link and found all IDE channels as already being listed under "DMA if available"

    The TRF error just happened once, and Nero uninstalls/installs have been giving me problems since I tried to install the 7 trial. Ill take a look at that solution if it happens more consistently.
     
    Last edited: Mar 26, 2006
  4. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    Maybe - maybe not. Some may fail and others might be fine. Another problem may be that even the latest firmware for your drive doesn't handle the 16x media and mid codes from some media. The last update has been awhile probably since 16x media became more common.
    Try upping the speed to 4x on these.
    For the DMA look next to 'current transfer mode' that's where the mode is. If your using that rom to read being in DMA mode will speed it up.
     
  5. zebra2321

    zebra2321 Member

    Joined:
    May 29, 2005
    Messages:
    18
    Likes Received:
    0
    Trophy Points:
    11
    Primary device 1 has current transfer mode as "not applicable" even though 'DMA if Available' is selected in the dropdown list for 'Transfer Mode'. I very rarely use the burner for reading, as I have a separate DVD reader inboard also.

    I tested just two of the discs, both had the same problem. Nero will only let me burn at 1x, 2x, 2.4x and maximum. I went out and bought some verbatim dvd+r up to 16x and they are working perfectly at 2x, 4x, and 6x, which are the only speeds Nero lets me pick.
     
  6. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    @zebra2321
    Verbatim is much better then Ritek. Good choice! Your drive just doesn't like the Ritek. Since your drive's highest speed is 8x and these discs are 16x these may be the max speeds Nero will allow w/ your drive/firmware.
    Oh and the trf error - w/ 6.6.1.4 you will always get this error when trying to autoburn with shrink. So if you don't want to go back a version you can do 1 of 2 things - after shrink is done then open Nero burning rom or express to burn.
    Or if use dvd decrypter to autoburn- pick 'iso image file and burn with dvd decrypter' under select back up target after you click back up.
     
  7. sweeneyj

    sweeneyj Member

    Joined:
    Mar 26, 2006
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    I found this forum/thread by Googling my problem. I've been happily burning TDK DVD-Rs from Costco on my TDK DVDRW0404N external drive for ages. I just opened a new spool and I've tried three discs and no matter what I try to burn, Nero gives me an "illegal disc" error. Have TDK changed their disks to be somehow incompatible with their own drives? Thanks for any advice; here's my log:

    Windows 2000 5.0
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 12/22/1997 4:23:24 PM
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM

    NT-SPTI used
    Nero Version: 7.0.0.0
    Recorder: <TDK DVDRW0404N> Version: 1.0C - HA 1 TA 3 - 7.0.0.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <SAMSUNG CD-ROM SC-148C >Version: B100 - HA 1 TA 1 - 7.0.0.0
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : MAXTOR 6L080L4 IntelAta Port 0 ID 0 DMA: On
    CdRomPeripheral : SAMSUNG CD-ROM SC-148C IntelAta Port 1 ID 0 DMA: On
    CdRomPeripheral : PIONEER DVD-RW DVR-103 IntelAta Port 1 ID 1 DMA: Off
    ScannerPeripheral : Scanner 1.80 SMPLSCSI Port 2 ID 6 DMA: Off

    === CDRom-Device-Map ===
    SAMSUNG CD-ROM SC-148C D: CDRom1
    PIONEER DVD-RW DVR-103 E: CDRom2
    TDK DVDRW0404N F: CDRom3
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523280kB)
    Free physical memory: 322MB (330312kB)
    Memory in use : 36 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    26.3.2006
    Burn DVD Image
    8:05:14 PM #1 Text 0 File ThreadedTransfer.cpp, Line 525
    ReadBuffer-Pipe got 262144KB of Memory

    8:05:14 PM #2 Text 0 File Reader.cpp, Line 124
    Reader running

    8:05:14 PM #3 Text 0 File Burncd.cpp, Line 3301
    Turn on Disc-At-Once, using DVD media

    8:05:50 PM #4 Text 0 File DlgWaitCD.cpp, Line 277
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1509013 (335:20.13, 2947MB)

    8:05:50 PM #5 Text 0 File DlgWaitCD.cpp, Line 289
    Write in overburning mode: NO (enabled: CD)

    8:05:50 PM #6 Text 0 File DlgWaitCD.cpp, Line 2568
    Recorder: TDK DVDRW0404N, Media type: DVD-R
    Disc Manufacturer: TTH02 -
    Disc Application Code: 64, Disc Physical Code: 193

    8:05:50 PM #7 Text 0 File DlgWaitCD.cpp, Line 456
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)

    8:05:50 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 846
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
    2 indices, index0 (150) not provided
    original disc pos #0 + 1509014 (1509014) = #1509014/335:20.14
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1509014 blocks [F: TDK DVDRW0404N]
    --------------------------------------------------------------

    8:05:50 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1058
    Prepare recorder [F: TDK DVDRW0404N] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3090460672, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    1509014 | lead-out | 1 | 0x41 | 0x00

    8:05:50 PM #10 Text 0 File SCSIPassThrough.cpp, Line 34
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    8:05:50 PM #11 Phase 24 File dlgbrnst.cpp, Line 1724
    Caching of files started

    8:05:50 PM #12 Text 0 File Burncd.cpp, Line 4129
    Cache writing successful.

    8:05:50 PM #13 Phase 25 File dlgbrnst.cpp, Line 1724
    Caching of files completed

    8:05:50 PM #14 Phase 36 File dlgbrnst.cpp, Line 1724
    Burn process started at 2.4x (3,324 KB/s)

    8:05:50 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2669
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    8:05:50 PM #16 Text 0 File DVDR.cpp, Line 2469
    Recording mode: Sequential Recording Mode

    8:05:50 PM #17 Text 0 File MMC.cpp, Line 21541
    Set BUFE: Buffer underrun protection -> ON

    8:05:50 PM #18 Text 0 File DVDR.cpp, Line 2624
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    8:05:50 PM #19 Text 0 File Cdrdrv.cpp, Line 8385
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    8:05:50 PM #20 SPTI -1046 File SCSIPassThrough.cpp, Line 306
    CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1046)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 00 00 00 00 00 17 06 A0 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0B 00 00 00 00 30 05

    8:05:50 PM #21 CDR -1046 File ThreadedTransferInterface.cpp, Line 1783
    Illegal disc
    F: TDK DVDRW0404N

    8:05:50 PM #22 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1783
    Could not perform start of Disc-at-once

    8:05:50 PM #23 Phase 38 File dlgbrnst.cpp, Line 1724
    Burn process failed at 2.4x (3,324 KB/s)


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.10a, size=64432 bytes, created 6/19/2003 11:05:04 AM
    File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 1/22/2005 11:33:23 AM
    File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 1/22/2005 11:33:23 AM
    File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 12/22/1997 5:02:46 PM
    File 'Drivers\IdeBusDr.sys': Ver=7.00.2001, 02/21/2001, size=13182 bytes, created 3/22/2001 10:00:00 PM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
  8. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    @sweeneyj
    It's possible - TDK uses different manufacturers. The ones you used before may have been manufactured by someone else. The ones you just opened though are made by TDK - the manufacturer id is TTH02.
    So since your frimware is up to date - even though TDK made your drive still doesn't like them.
    The ones that are most compatible w/ drives and players are Taiyo Yuden, Verbatim and made in Japan Maxell. Try switching to one of these.

    Not too much else wrong though your version of Nero could be updated to the latest 7.0.8.2.
    You can download it from the link below or thru Nero smart start product center.
    http://ww2.nero.com/nero7/enu/nero7-up.php

    You also have Roxio installed which can sometimes cause problems. You can uninstall it and run the zapper:
    http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml
     
    Last edited: Mar 26, 2006
  9. gwendolin

    gwendolin Senior member

    Joined:
    Jun 29, 2005
    Messages:
    7,528
    Likes Received:
    0
    Trophy Points:
    116
    Last edited: Mar 26, 2006
  10. pike67

    pike67 Member

    Joined:
    Mar 26, 2006
    Messages:
    12
    Likes Received:
    0
    Trophy Points:
    11
    Im having the same problem with the same burner. Ive tried different kinds of media tdk, memorex, sony(Japan) and I still am Stuck

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 6/10/2003 3:51:27 PM
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
    Nero API version: 6.6.0.18
    Using interface version: 6.3.1.4
    Installed in: C:\Program Files\Ahead\Nero\
    Application: ahead\Nero - Burning Rom
    Internal Version: 6, 6, 0, 18e

    Recorder: <TDK DVDRW0404N> Version: 1.0C - HA 1 TA 1 - 6.6.0.18
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD400EB-00CPF0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : TDK CDRW5200B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : TDK DVDRW0404N atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    TDK CDRW5200B D: CDRom0
    TDK DVDRW0404N E: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 765MB (784368kB)
    Free physical memory: 500MB (512948kB)
    Memory in use : 34 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    26.3.2006
    NeroAPI
    8:11:57 PM #1 Phase 112 File APIProgress.cpp, Line 276
    DVD-Video files reallocation started

    8:11:57 PM #2 Phase 114 File APIProgress.cpp, Line 276
    DVD-Video files reallocation completed (no file modified)

    8:11:57 PM #3 Phase 111 File APIProgress.cpp, Line 276
    DVD-Video files sorted

    8:11:57 PM #4 Text 0 File Reader.cpp, Line 127
    Reader running

    8:11:57 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842
    DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
    DRM: Beginning burn process.

    8:11:57 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    8:11:58 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    8:11:58 PM #8 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    8:51:31 PM #9 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2202111 (489:21.36, 4300MB)

    8:51:31 PM #10 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO

    8:51:31 PM #11 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: TDK DVDRW0404N, Media type: DVD-R
    Disc Manufacturer: SONY16 - D1
    Disc Application Code: 64, Disc Physical Code: 193

    8:51:31 PM #12 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)

    8:51:31 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2202112 (2202112) = #2202112/489:21.37
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202112 blocks [TDK DVDRW0404N]
    --------------------------------------------------------------

    8:51:31 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [TDK DVDRW0404N] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4509925376, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2202112 | lead-out | 1 | 0x41 | 0x00

    8:51:32 PM #15 Phase 24 File APIProgress.cpp, Line 276
    Caching of files started

    8:51:32 PM #16 Text 0 File Burncd.cpp, Line 4122
    Cache writing successful.

    8:51:32 PM #17 Phase 25 File APIProgress.cpp, Line 276
    Caching of files completed

    8:51:32 PM #18 Phase 36 File APIProgress.cpp, Line 276
    Burn process started at 2.4x (3,324 KB/s)

    8:51:32 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    8:51:32 PM #20 Text 0 File DVDR.cpp, Line 2571
    Recording mode: Sequential Recording Mode for Multisession

    8:51:32 PM #21 Text 0 File Mmc.cpp, Line 21774
    Set BUFE: Buffer underrun protection -> ON

    8:51:32 PM #22 Text 0 File DVDR.cpp, Line 2726
    Start write address at LBA 0
    DVD high compatibility mode: No

    8:51:32 PM #23 Text 0 File Cdrdrv.cpp, Line 8892
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    8:51:32 PM #24 SCSI -1046 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 1, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x21 0x9A 0x00 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    8:51:32 PM #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1778
    Illegal disc

    8:51:32 PM #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1778
    Could not perform start of Disc-at-once

    8:51:32 PM #27 Phase 38 File APIProgress.cpp, Line 276
    Burn process failed at 2.4x (3,324 KB/s)

    8:51:32 PM #28 Text 0 File AudioCompilationImpl.cpp, Line 867
    DRM: DRM burn session terminated.

    8:51:32 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 896
    DRM: Closing entire DRM handling. Bye.


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 6/10/2003 3:51:27 PM
    File 'Drivers\Tpp200.sys': Ver=5.04.1150.0 , size=35541 bytes, created 10/5/2001 11:54:28 AM

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
  11. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    Geez this drive must be pretty picky w/ media! Sony's decent stuff - won't say the best but I've never had a problem w/ this id on a Pioneer or Liteon.
    This drive is a bit older (max burn speed of 4x) and the firmware hasn't had an update in awhile so my thinking is the newer 8x & 16x speed media used may be giving it problems. Try switching to verbatim or Taiyo Yuden - I would look for 8x.
    @pike67
    You should also try turning this off since your are using -R media:
    In Burning Rom it under the mutli session tab - check no for multisession.

     
  12. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    31,683
    Likes Received:
    1
    Trophy Points:
    96
  13. andyp95

    andyp95 Member

    Joined:
    Mar 27, 2006
    Messages:
    33
    Likes Received:
    0
    Trophy Points:
    16
    Hi, Can somebody help me on this one also?
    I have this Liteon SOHW 832s burner for almost a year now, and I never have any problem burning until yesterday.
    My problem is not just Nero, but also DVD Decrypter and other burning software. I guess my pc doens't detect the burner anymore or something which maybe because I just updates my computer .
    When I burn with Nero, it says "Illegal Disc" then stop burning.
    With DVD DEcrypter, it says" Device not ready: Medium is missing"
    Any suggestions anyone?? I don't know what I should do now.
     
  14. sweeneyj

    sweeneyj Member

    Joined:
    Mar 26, 2006
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    Gwendolyn,

    Thanks. No, your comment may actually be quite helpful. The Pioneer drive isn't working either. It's an old drive and I assumed that I screwed something up when I updated the firmware, but maybe I just need to change a setting.

    Jim
     
  15. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    @andyp95
    One of my drives is the Liteon that you have - I've had it over a year and no problems (knock on wood). May be a media issue. I mainly use Taiyo Yuden or Verbatim 8x's burning at 4x on it.
    To sort it out post your last failure Nero log. They can be found here:
    Nero 7:program Files>Nero>Nero 7>Core>Nerohistory.txt
    Nero 6:program Files>Ahead>Nero>Nerohistory.txt

    @sweeneyj
    Just use the link Gwen gave to get it back in DMA mode.
    Let's us know how it turns out - good, bad or otherwise.

    @gwendolyn
    Txs for catching that!!

     
  16. andyp95

    andyp95 Member

    Joined:
    Mar 27, 2006
    Messages:
    33
    Likes Received:
    0
    Trophy Points:
    16
    Hi, I forgot to mention in the last message, that I had this error when still using Nero 6, after installing Nero 7, hoping it'd worked, unfortunately the same thing happened.
    With TMPenc DVD Author, it says" Drive NOt Ready"...I tried w/diff softwares already, it still didn't work.
    Anyway, here's the history files:

    History for Nero 7:

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero Version: 7.0.5.5
    Internal Version: 7, 0, 5, 5

    Recorder: <LITE-ON DVDRW SOHW-832S> Version: CG4E - HA 1 TA 1 - 7.0.5.5
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <PIONEER DVD-ROM DVD-117R>Version: 1.04 - HA 1 TA 0 - 7.0.5.5
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1600JB-00HUA0 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : ST360020A atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : PIONEER DVD-ROM DVD-117R atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : LITE-ON DVDRW SOHW-832S atapi Port 1 ID 1 DMA: On
    CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    LITE-ON DVDRW SOHW-832S D: CDRom1
    PIONEER DVD-ROM DVD-117R G: CDRom0
    Generic DVD-ROM H: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    BUFE : 0
    Physical memory : 511MB (523808kB)
    Free physical memory: 243MB (249592kB)
    Memory in use : 52
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    27.3.2006
    Burn DVD Image
    2:32:09 AM #1 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 262144KB of Memory

    2:32:09 AM #2 Text 0 File Reader.cpp, Line 124
    Reader running

    2:32:09 AM #3 Text 0 File Burncd.cpp, Line 3341
    Turn on Disc-At-Once, using DVD media

    2:32:18 AM #4 Phase 40 File dlgbrnst.cpp, Line 1730
    Aborted by user

    2:32:18 AM #5 Text 0 File DlgWaitCD.cpp, Line 300
    Write in overburning mode: NO (enabled: CD)

    2:32:18 AM #6 Text 0 File DlgWaitCD.cpp, Line 2699
    Recorder: LITE-ON DVDRW SOHW-832S
    Medium not present

    2:32:18 AM #7 Text 0 File DlgWaitCD.cpp, Line 472
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD+R DL.)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 8/29/2004 9:50:34 PM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero Burning ROM, History File *** ======


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero Version: 7.0.5.5
    Internal Version: 7, 0, 5, 5

    Recorder: <LITE-ON DVDRW SOHW-832S> Version: CG4E - HA 1 TA 1 - 7.0.5.5
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <PIONEER DVD-ROM DVD-117R>Version: 1.04 - HA 1 TA 0 - 7.0.5.5
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1600JB-00HUA0 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : ST360020A atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : PIONEER DVD-ROM DVD-117R atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : LITE-ON DVDRW SOHW-832S atapi Port 1 ID 1 DMA: On
    CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    LITE-ON DVDRW SOHW-832S D: CDRom1
    PIONEER DVD-ROM DVD-117R G: CDRom0
    Generic DVD-ROM H: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    BUFE : 0
    Physical memory : 511MB (523808kB)
    Free physical memory: 173MB (177200kB)
    Memory in use : 66
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    27.3.2006
    Burn DVD Image
    2:37:38 AM #1 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 72704KB of Memory

    2:37:38 AM #2 Text 0 File Reader.cpp, Line 124
    Reader running

    2:37:38 AM #3 Text 0 File Writer.cpp, Line 113
    Writer D: LITE-ON DVDRW SOHW-832S running

    2:37:38 AM #4 Text 0 File Burncd.cpp, Line 3341
    Turn on Disc-At-Once, using DVD media

    2:37:44 AM #5 Text 0 File DlgWaitCD.cpp, Line 288
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2285751 (507:56.51, 4464MB)

    2:37:44 AM #6 Text 0 File DlgWaitCD.cpp, Line 300
    Write in overburning mode: NO (enabled: CD)

    2:37:44 AM #7 Text 0 File DlgWaitCD.cpp, Line 2699
    Recorder: LITE-ON DVDRW SOHW-832S, Media type: DVD+RW
    Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
    Disc Application Code: 0, Extended Information Indicators: 1

    2:37:44 AM #8 Text 0 File DlgWaitCD.cpp, Line 472
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW, DVD+R DL.)
    This disc is not empty.
    (Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW, DVD+R DL.)
    Accessing disc...
    (Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW, DVD+R DL.)

    2:37:44 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2285752 (2285752) = #2285752/507:56.52
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285752 blocks [D: LITE-ON DVDRW SOHW-832S]
    --------------------------------------------------------------

    2:37:44 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [D: LITE-ON DVDRW SOHW-832S] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681220096, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2285752 | lead-out | 1 | 0x41 | 0x00

    2:37:44 AM #11 Text 0 File SCSIPassThrough.cpp, Line 39
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    2:37:44 AM #12 Text 0 File SCSIPassThrough.cpp, Line 84
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    2:37:44 AM #13 Phase 24 File dlgbrnst.cpp, Line 1730
    Caching of files started

    2:37:44 AM #14 Text 0 File Burncd.cpp, Line 4175
    Cache writing successful.

    2:37:44 AM #15 Phase 25 File dlgbrnst.cpp, Line 1730
    Caching of files completed

    2:37:44 AM #16 Phase 36 File dlgbrnst.cpp, Line 1730
    Burn process started at 4x (5,540 KB/s)

    2:37:44 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    2:37:44 AM #18 Text 0 File Cdrdrv.cpp, Line 8663
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+RW (9), Part Version: 1.1x (2)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 25E11F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 1 h
    Disc Manufacturer ID: RICOHJPN
    Media type ID: W11
    Product revision number: 1
    Number of Physical format information bytes in use in ADIP up to byte 63: 57
    Media Specific [16..63]:
    00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
    23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
    6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............

    2:37:44 AM #19 Text 0 File DVDPlusRW.cpp, Line 666
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    2:37:46 AM #20 SPTI -1046 File SCSIPassThrough.cpp, Line 290
    D: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x06
    CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 06
    Buffer x09e00000: Len x10000
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    2:37:46 AM #21 CDR -1046 File Writer.cpp, Line 302
    Illegal disc
    D: LITE-ON DVDRW SOHW-832S

    2:37:46 AM #22 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    2:37:47 AM #23 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    2:37:47 AM #24 Phase 38 File dlgbrnst.cpp, Line 1730
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 8/29/2004 9:50:34 PM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero Burning ROM, History File *** ======


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero Version: 7.0.5.5
    Internal Version: 7, 0, 5, 5

    Recorder: <LITE-ON DVDRW SOHW-832S> Version: CG4E - HA 1 TA 1 - 7.0.5.5
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <PIONEER DVD-ROM DVD-117R>Version: 1.04 - HA 1 TA 0 - 7.0.5.5
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1600JB-00HUA0 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : ST360020A atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : PIONEER DVD-ROM DVD-117R atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : LITE-ON DVDRW SOHW-832S atapi Port 1 ID 1 DMA: On
    CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    LITE-ON DVDRW SOHW-832S D: CDRom1
    PIONEER DVD-ROM DVD-117R G: CDRom0
    Generic DVD-ROM H: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    BUFE : 0
    Physical memory : 511MB (523808kB)
    Free physical memory: 1MB (1544kB)
    Memory in use : 99
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    27.3.2006
    Burn DVD Image
    2:58:25 AM #1 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 262144KB of Memory

    2:58:25 AM #2 Text 0 File Reader.cpp, Line 124
    Reader running

    2:58:25 AM #3 Text 0 File Writer.cpp, Line 113
    Writer D: LITE-ON DVDRW SOHW-832S running

    2:58:25 AM #4 Text 0 File Burncd.cpp, Line 3341
    Turn on Disc-At-Once, using DVD media

    3:00:22 AM #5 Text 0 File DlgWaitCD.cpp, Line 288
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2285751 (507:56.51, 4464MB)

    3:00:22 AM #6 Text 0 File DlgWaitCD.cpp, Line 300
    Write in overburning mode: NO (enabled: CD)

    3:00:23 AM #7 Text 0 File DlgWaitCD.cpp, Line 2699
    Recorder: LITE-ON DVDRW SOHW-832S, Media type: DVD+RW
    Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
    Disc Application Code: 0, Extended Information Indicators: 1

    3:00:23 AM #8 Text 0 File DlgWaitCD.cpp, Line 472
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD+R DL.)
    This disc is not empty.
    (Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW, DVD+R DL.)
    Accessing disc...
    (Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW, DVD+R DL.)

    3:00:23 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2285752 (2285752) = #2285752/507:56.52
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285752 blocks [D: LITE-ON DVDRW SOHW-832S]
    --------------------------------------------------------------

    3:00:23 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [D: LITE-ON DVDRW SOHW-832S] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681220096, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2285752 | lead-out | 1 | 0x41 | 0x00

    3:00:23 AM #11 Text 0 File SCSIPassThrough.cpp, Line 39
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    3:00:23 AM #12 Text 0 File SCSIPassThrough.cpp, Line 84
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    3:00:23 AM #13 Phase 24 File dlgbrnst.cpp, Line 1730
    Caching of files started

    3:00:23 AM #14 Text 0 File Burncd.cpp, Line 4175
    Cache writing successful.

    3:00:23 AM #15 Phase 25 File dlgbrnst.cpp, Line 1730
    Caching of files completed

    3:00:23 AM #16 Phase 36 File dlgbrnst.cpp, Line 1730
    Burn process started at 4x (5,540 KB/s)

    3:00:23 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    3:00:23 AM #18 Text 0 File Cdrdrv.cpp, Line 8663
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+RW (9), Part Version: 1.1x (2)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 25E11F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 1 h
    Disc Manufacturer ID: RICOHJPN
    Media type ID: W11
    Product revision number: 1
    Number of Physical format information bytes in use in ADIP up to byte 63: 57
    Media Specific [16..63]:
    00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
    23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
    6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............

    3:00:23 AM #19 Text 0 File DVDPlusRW.cpp, Line 666
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    3:00:38 AM #20 SPTI -1046 File SCSIPassThrough.cpp, Line 290
    D: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x06
    CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 06
    Buffer x054f0000: Len x10000
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    3:00:38 AM #21 CDR -1046 File Writer.cpp, Line 302
    Illegal disc
    D: LITE-ON DVDRW SOHW-832S

    3:00:38 AM #22 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    3:00:39 AM #23 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    3:00:40 AM #24 Phase 38 File dlgbrnst.cpp, Line 1730
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 8/29/2004 9:50:34 PM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero Burning ROM, History File *** ======


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero Version: 7.0.5.5
    Internal Version: 7, 0, 5, 5

    Recorder: <LITE-ON DVDRW SOHW-832S> Version: CG5J - HA 1 TA 1 - 7.0.5.5
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <PIONEER DVD-ROM DVD-117R>Version: 1.04 - HA 1 TA 0 - 7.0.5.5
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1600JB-00HUA0 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : ST360020A atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : PIONEER DVD-ROM DVD-117R atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : LITE-ON DVDRW SOHW-832S atapi Port 1 ID 1 DMA: On
    CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    LITE-ON DVDRW SOHW-832S D: CDRom1
    PIONEER DVD-ROM DVD-117R G: CDRom0
    Generic DVD-ROM H: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    BUFE : 0
    Physical memory : 511MB (523808kB)
    Free physical memory: 195MB (200416kB)
    Memory in use : 61
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    27.3.2006
    Burn DVD Image
    4:27:05 AM #1 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 72704KB of Memory

    4:27:05 AM #2 Text 0 File Reader.cpp, Line 124
    Reader running

    4:27:05 AM #3 Text 0 File Writer.cpp, Line 113
    Writer D: LITE-ON DVDRW SOHW-832S running

    4:27:05 AM #4 Text 0 File Burncd.cpp, Line 3341
    Turn on Disc-At-Once, using DVD media

    4:27:10 AM #5 Text 0 File DlgWaitCD.cpp, Line 288
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2285751 (507:56.51, 4464MB)

    4:27:10 AM #6 Text 0 File DlgWaitCD.cpp, Line 300
    Write in overburning mode: NO (enabled: CD)

    4:27:10 AM #7 Text 0 File DlgWaitCD.cpp, Line 2699
    Recorder: LITE-ON DVDRW SOHW-832S, Media type: DVD+RW
    Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
    Disc Application Code: 0, Extended Information Indicators: 1

    4:27:10 AM #8 Text 0 File DlgWaitCD.cpp, Line 472
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW, DVD+R DL.)
    This disc is not empty.
    (Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW, DVD+R DL.)
    Accessing disc...
    (Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW, DVD+R DL.)

    4:27:10 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2285752 (2285752) = #2285752/507:56.52
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285752 blocks [D: LITE-ON DVDRW SOHW-832S]
    --------------------------------------------------------------

    4:27:10 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [D: LITE-ON DVDRW SOHW-832S] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681220096, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2285752 | lead-out | 1 | 0x41 | 0x00

    4:27:10 AM #11 Text 0 File SCSIPassThrough.cpp, Line 39
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    4:27:10 AM #12 Text 0 File SCSIPassThrough.cpp, Line 84
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    4:27:10 AM #13 Phase 24 File dlgbrnst.cpp, Line 1730
    Caching of files started

    4:27:10 AM #14 Text 0 File Burncd.cpp, Line 4175
    Cache writing successful.

    4:27:10 AM #15 Phase 25 File dlgbrnst.cpp, Line 1730
    Caching of files completed

    4:27:10 AM #16 Phase 36 File dlgbrnst.cpp, Line 1730
    Burn process started at 4x (5,540 KB/s)

    4:27:10 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    4:27:10 AM #18 Text 0 File Cdrdrv.cpp, Line 8663
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+RW (9), Part Version: 1.1x (2)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 25E11F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 1 h
    Disc Manufacturer ID: RICOHJPN
    Media type ID: W11
    Product revision number: 1
    Number of Physical format information bytes in use in ADIP up to byte 63: 57
    Media Specific [16..63]:
    00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
    23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
    6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............

    4:27:10 AM #19 Text 0 File DVDPlusRW.cpp, Line 666
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    4:27:12 AM #20 SPTI -1046 File SCSIPassThrough.cpp, Line 290
    D: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x06
    CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 06
    Buffer x09d00000: Len x10000
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    4:27:12 AM #21 CDR -1046 File Writer.cpp, Line 302
    Illegal disc
    D: LITE-ON DVDRW SOHW-832S

    4:27:12 AM #22 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    4:27:12 AM #23 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    4:27:13 AM #24 Phase 38 File dlgbrnst.cpp, Line 1730
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 8/29/2004 9:50:34 PM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero Burning ROM, History File *** ======


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero Version: 7.0.5.5
    Internal Version: 7, 0, 5, 5
    (Nero Express)
    Recorder: <LITE-ON DVDRW SOHW-832S> Version: CG5J - HA 1 TA 1 - 7.0.5.5
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <PIONEER DVD-ROM DVD-117R>Version: 1.04 - HA 1 TA 0 - 7.0.5.5
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1600JB-00HUA0 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : ST360020A atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : PIONEER DVD-ROM DVD-117R atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : LITE-ON DVDRW SOHW-832S atapi Port 1 ID 1 DMA: On
    CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    LITE-ON DVDRW SOHW-832S D: CDRom1
    PIONEER DVD-ROM DVD-117R G: CDRom0
    Generic DVD-ROM H: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    BUFE : 0
    Physical memory : 511MB (523808kB)
    Free physical memory: 234MB (239800kB)
    Memory in use : 54
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    27.3.2006
    CD-ROM (ISO)
    4:38:29 AM #1 Text 0 File Isodoc.cpp, Line 6414
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : FALSE
    Multisession : TRUE
    Multisession type: : Start multisession
    Burning mode : TAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    4:38:29 AM #2 Text 0 File Burncd.cpp, Line 3044
    LITE-ON DVDRW SOHW-832S
    Buffer underrun protection activated

    4:38:29 AM #3 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 72704KB of Memory

    4:38:29 AM #4 Text 0 File Reader.cpp, Line 124
    Reader running

    4:38:29 AM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    4:38:29 AM #6 Text 0 File Burncd.cpp, Line 3341
    Turn on Track-At-Once, using CD-R/RW media

    4:38:32 AM #7 Phase 40 File dlgbrnst.cpp, Line 1730
    Aborted by user

    4:38:32 AM #8 Text 0 File DlgWaitCD.cpp, Line 300
    Write in overburning mode: NO (enabled: CD)

    4:38:32 AM #9 Text 0 File DlgWaitCD.cpp, Line 2699
    Recorder: LITE-ON DVDRW SOHW-832S
    Medium not present

    4:38:32 AM #10 Text 0 File DlgWaitCD.cpp, Line 472
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert the disc to write to.
    (Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 8/29/2004 9:50:34 PM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero Burning ROM, History File *** ======


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero Version: 7.0.5.5
    Internal Version: 7, 0, 5, 5

    Recorder: <LITE-ON DVDRW SOHW-832S> Version: CG5J - HA 1 TA 1 - 7.0.5.5
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <PIONEER DVD-ROM DVD-117R>Version: 1.04 - HA 1 TA 0 - 7.0.5.5
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1600JB-00HUA0 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : ST360020A atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : PIONEER DVD-ROM DVD-117R atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : LITE-ON DVDRW SOHW-832S atapi Port 1 ID 1 DMA: On
    CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    LITE-ON DVDRW SOHW-832S D: CDRom1
    PIONEER DVD-ROM DVD-117R G: CDRom0
    Generic DVD-ROM H: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    BUFE : 0
    Physical memory : 511MB (523808kB)
    Free physical memory: 167MB (171160kB)
    Memory in use : 67
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    27.3.2006
    Burn DVD Image
    4:49:39 AM #1 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 72704KB of Memory

    4:49:40 AM #2 Text 0 File Reader.cpp, Line 124
    Reader running

    4:49:40 AM #3 Text 0 File Writer.cpp, Line 113
    Writer D: LITE-ON DVDRW SOHW-832S running

    4:49:40 AM #4 Text 0 File Burncd.cpp, Line 3341
    Turn on Disc-At-Once, using DVD media

    4:49:44 AM #5 Text 0 File DlgWaitCD.cpp, Line 288
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2104078 (467:34.28, 4109MB)

    4:49:44 AM #6 Text 0 File DlgWaitCD.cpp, Line 300
    Write in overburning mode: NO (enabled: CD)

    4:49:44 AM #7 Text 0 File DlgWaitCD.cpp, Line 2699
    Recorder: LITE-ON DVDRW SOHW-832S, Media type: DVD+RW
    Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
    Disc Application Code: 0, Extended Information Indicators: 1

    4:49:44 AM #8 Text 0 File DlgWaitCD.cpp, Line 472
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW, DVD+R DL.)
    This disc is not empty.
    (Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW, DVD+R DL.)
    Accessing disc...
    (Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW, DVD+R DL.)

    4:49:44 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2104079 (2104079) = #2104079/467:34.29
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2104079 blocks [D: LITE-ON DVDRW SOHW-832S]
    --------------------------------------------------------------

    4:49:44 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [D: LITE-ON DVDRW SOHW-832S] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4309153792, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2104079 | lead-out | 1 | 0x41 | 0x00

    4:49:44 AM #11 Text 0 File SCSIPassThrough.cpp, Line 39
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    4:49:44 AM #12 Text 0 File SCSIPassThrough.cpp, Line 84
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    4:49:44 AM #13 Phase 24 File dlgbrnst.cpp, Line 1730
    Caching of files started

    4:49:44 AM #14 Text 0 File Burncd.cpp, Line 4175
    Cache writing successful.

    4:49:44 AM #15 Phase 25 File dlgbrnst.cpp, Line 1730
    Caching of files completed

    4:49:44 AM #16 Phase 36 File dlgbrnst.cpp, Line 1730
    Burn process started at 4x (5,540 KB/s)

    4:49:44 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    4:49:44 AM #18 Text 0 File Cdrdrv.cpp, Line 8663
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+RW (9), Part Version: 1.1x (2)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 25E11F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 1 h
    Disc Manufacturer ID: RICOHJPN
    Media type ID: W11
    Product revision number: 1
    Number of Physical format information bytes in use in ADIP up to byte 63: 57
    Media Specific [16..63]:
    00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
    23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
    6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............

    4:49:44 AM #19 Text 0 File DVDPlusRW.cpp, Line 666
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    4:49:47 AM #20 SPTI -1046 File SCSIPassThrough.cpp, Line 290
    D: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x06
    CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 06
    Buffer x09e10000: Len x10000
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    4:49:47 AM #21 CDR -1046 File Writer.cpp, Line 302
    Illegal disc
    D: LITE-ON DVDRW SOHW-832S

    4:49:47 AM #22 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    4:49:47 AM #23 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    4:49:47 AM #24 Phase 38 File dlgbrnst.cpp, Line 1730
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 8/29/2004 9:50:34 PM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero Burning ROM, History File *** ======


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero Version: 7.0.5.5
    Internal Version: 7, 0, 5, 5

    Recorder: <LITE-ON DVDRW SOHW-832S> Version: VS0M - HA 1 TA 1 - 7.0.5.5
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <PIONEER DVD-ROM DVD-117R>Version: 1.04 - HA 1 TA 0 - 7.0.5.5
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1600JB-00HUA0 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : ST360020A atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : PIONEER DVD-ROM DVD-117R atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : LITE-ON DVDRW SOHW-832S atapi Port 1 ID 1 DMA: On
    CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    LITE-ON DVDRW SOHW-832S D: CDRom1
    PIONEER DVD-ROM DVD-117R G: CDRom0
    Generic DVD-ROM H: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    BUFE : 0
    Physical memory : 511MB (523808kB)
    Free physical memory: 108MB (110784kB)
    Memory in use : 78
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    27.3.2006
    Burn DVD Image
    8:42:46 AM #1 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 72704KB of Memory

    8:42:46 AM #2 Text 0 File Reader.cpp, Line 124
    Reader running

    8:42:46 AM #3 Text 0 File Writer.cpp, Line 113
    Writer D: LITE-ON DVDRW SOHW-832S running

    8:42:46 AM #4 Text 0 File Burncd.cpp, Line 3341
    Turn on Disc-At-Once, using DVD media

    8:42:50 AM #5 Text 0 File DlgWaitCD.cpp, Line 288
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 1607039 (357:07.14, 3138MB)

    8:42:50 AM #6 Text 0 File DlgWaitCD.cpp, Line 300
    Write in overburning mode: NO (enabled: CD)

    8:42:50 AM #7 Text 0 File DlgWaitCD.cpp, Line 2699
    Recorder: LITE-ON DVDRW SOHW-832S, Media type: DVD+RW
    Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
    Disc Application Code: 0, Extended Information Indicators: 1

    8:42:50 AM #8 Text 0 File DlgWaitCD.cpp, Line 472
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW, DVD+R DL.)
    This disc is not empty.
    (Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW, DVD+R DL.)
    Accessing disc...
    (Medium in drive: DVD+RW. Medium required by compilation: DVD R/RW, DVD+R DL.)

    8:42:50 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
    2 indices, index0 (150) not provided
    original disc pos #0 + 1607040 (1607040) = #1607040/357:7.15
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1607040 blocks [D: LITE-ON DVDRW SOHW-832S]
    --------------------------------------------------------------

    8:42:50 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [D: LITE-ON DVDRW SOHW-832S] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3291217920, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    1607040 | lead-out | 1 | 0x41 | 0x00

    8:42:50 AM #11 Text 0 File SCSIPassThrough.cpp, Line 39
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    8:42:50 AM #12 Text 0 File SCSIPassThrough.cpp, Line 84
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    8:42:50 AM #13 Phase 24 File dlgbrnst.cpp, Line 1730
    Caching of files started

    8:42:50 AM #14 Text 0 File Burncd.cpp, Line 4175
    Cache writing successful.

    8:42:50 AM #15 Phase 25 File dlgbrnst.cpp, Line 1730
    Caching of files completed

    8:42:50 AM #16 Phase 36 File dlgbrnst.cpp, Line 1730
    Burn process started at 4x (5,540 KB/s)

    8:42:50 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    8:42:50 AM #18 Text 0 File Cdrdrv.cpp, Line 8663
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+RW (9), Part Version: 1.1x (2)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 25E11F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 1 h
    Disc Manufacturer ID: RICOHJPN
    Media type ID: W11
    Product revision number: 1
    Number of Physical format information bytes in use in ADIP up to byte 63: 57
    Media Specific [16..63]:
    00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
    23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
    6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............

    8:42:50 AM #19 Text 0 File DVDPlusRW.cpp, Line 666
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    8:42:53 AM #20 SPTI -1046 File SCSIPassThrough.cpp, Line 290
    D: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x06
    CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 06
    Buffer x05690000: Len x10000
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    8:42:53 AM #21 CDR -1046 File Writer.cpp, Line 302
    Illegal disc
    D: LITE-ON DVDRW SOHW-832S

    8:42:53 AM #22 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    8:42:53 AM #23 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    8:42:54 AM #24 Phase 38 File dlgbrnst.cpp, Line 1730
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 8/29/2004 9:50:34 PM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero Burning ROM, History File *** ======


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero Version: 7.0.5.5
    Internal Version: 7, 0, 5, 5

    Recorder: <LITE-ON DVDRW SOHW-832S> Version: VS0M - HA 1 TA 1 - 7.0.5.5
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <PIONEER DVD-ROM DVD-117R>Version: 1.04 - HA 1 TA 0 - 7.0.5.5
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1600JB-00HUA0 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : ST360020A atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : PIONEER DVD-ROM DVD-117R atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : LITE-ON DVDRW SOHW-832S atapi Port 1 ID 1 DMA: On
    CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    LITE-ON DVDRW SOHW-832S D: CDRom1
    PIONEER DVD-ROM DVD-117R G: CDRom0
    Generic DVD-ROM H: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    BUFE : 0
    Physical memory : 511MB (523808kB)
    Free physical memory: 202MB (207756kB)
    Memory in use : 60
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    27.3.2006
    Burn DVD Image
    8:45:37 AM #1 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 262144KB of Memory

    8:45:37 AM #2 Text 0 File Reader.cpp, Line 124
    Reader running

    8:45:37 AM #3 Text 0 File Burncd.cpp, Line 3341
    Turn on Disc-At-Once, using DVD media

    8:45:45 AM #4 Phase 40 File dlgbrnst.cpp, Line 1730
    Aborted by user

    8:45:45 AM #5 Text 0 File DlgWaitCD.cpp, Line 300
    Write in overburning mode: NO (enabled: CD)

    8:45:46 AM #6 Text 0 File DlgWaitCD.cpp, Line 2699
    Recorder: LITE-ON DVDRW SOHW-832S, Media type: DVD-RW

    8:45:46 AM #7 Text 0 File DlgWaitCD.cpp, Line 472
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD+R DL.)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 8/29/2004 9:50:34 PM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero Burning ROM, History File *** ======



    Nero 6 History:



    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
    Nero version: 6.3.1.11
    Recorder: <LITE-ON DVDRW SOHW-832S> Version: CG4E - HA 1 TA 1 - 6.3.1.11
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <PIONEER DVD-ROM DVD-117R>Version: 1.04 - HA 1 TA 0 - 6.3.1.11
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1600JB-00HUA0 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : ST360020A atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : PIONEER DVD-ROM DVD-117R atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : LITE-ON DVDRW SOHW-832S atapi Port 1 ID 1 DMA: On
    CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    PIONEER DVD-ROM DVD-117R G: CDRom0
    LITE-ON DVDRW SOHW-832S D: CDRom1
    Generic DVD-ROM H: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 511MB (523808kB)
    Free physical memory: 183MB (188144kB)
    Memory in use : 64 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    26.3.2006
    Burn DVD Image
    7:50:34 AM #1 Text 0 File Reader.cpp, Line 118
    Reader running

    7:50:34 AM #2 Text 0 File Writer.cpp, Line 124
    Writer LITE-ON DVDRW SOHW-832S running

    7:50:34 AM #3 Text 0 File Burncd.cpp, Line 3196
    Turn on Disc-at-once, using DVD media

    7:50:34 AM #4 Text 0 File DlgWaitCD.cpp, Line 244
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2183027 (485:07.02, 4263MB)

    7:50:34 AM #5 Text 0 File DlgWaitCD.cpp, Line 249
    Write in overburning mode: FALSE

    7:50:34 AM #6 Text 0 File DlgWaitCD.cpp, Line 2107
    Recorder: LITE-ON DVDRW SOHW-832S, Media type: DVD+RW
    Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
    Disc Application Code: 0, Extended Information Indicators: 1

    7:50:34 AM #7 Text 0 File DlgWaitCD.cpp, Line 410
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    7:50:34 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2183028 (2183028) = #2183028/485:7.3
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2183028 blocks [LITE-ON DVDRW SOHW-832S ]
    --------------------------------------------------------------

    7:50:35 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 982
    Prepare recorder [LITE-ON DVDRW SOHW-832S ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4470841344, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2183028 | lead-out | 1 | 0x00 | 0x41

    7:50:35 AM #10 Phase 24 File dlgbrnst.cpp, Line 1836
    Caching of files started

    7:50:35 AM #11 Text 0 File Burncd.cpp, Line 4206
    Cache writing successful.

    7:50:35 AM #12 Phase 25 File dlgbrnst.cpp, Line 1836
    Caching of files completed

    7:50:35 AM #13 Phase 36 File dlgbrnst.cpp, Line 1836
    Burn process started at 4x (5,520 KB/s)

    7:50:35 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2345
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    7:50:35 AM #15 Text 0 File Cdrdrv.cpp, Line 8063
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+RW (9), Part Version: 2
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 25E0BF h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 1 h
    Disc Manufacturer ID: RICOHJPN
    Media type ID: W11
    Product revision number: 1
    Number of Physical format information bytes in use in ADIP up to byte 63: 57
    Media Specific [16..63]:
    00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
    23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
    6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............

    7:50:35 AM #16 Text 0 File dlgbrnst.cpp, Line 1694
    Set remaining time: 13:40,452 (820452ms) -> OK

    7:50:35 AM #17 Text 0 File DVDPlusRW.cpp, Line 618
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    7:50:39 AM #18 SCSI -1046 File Cdrdrv.cpp, Line 1441
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x02D30000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x06
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x06

    7:50:39 AM #19 CDR -1046 File Writer.cpp, Line 304
    Illegal disc

    7:50:39 AM #20 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    7:50:40 AM #21 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    7:50:40 AM #22 Text 0 File dlgbrnst.cpp, Line 1694
    Set remaining time: 0:00,000 (0ms) -> OK

    7:50:40 AM #23 Text 0 File dlgbrnst.cpp, Line 1694
    Set remaining time: 0:00,000 (0ms) -> OK

    7:50:40 AM #24 Phase 38 File dlgbrnst.cpp, Line 1836
    Burn process failed at 4x (5,520 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 8/29/2004 9:50:34 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 7/16/2003 11:18:32 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
    Nero version: 6.3.1.11
    Recorder: <LITE-ON DVDRW SOHW-832S> Version: CG4E - HA 1 TA 1 - 6.3.1.11
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <PIONEER DVD-ROM DVD-117R>Version: 1.04 - HA 1 TA 0 - 6.3.1.11
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1600JB-00HUA0 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : ST360020A atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : PIONEER DVD-ROM DVD-117R atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : LITE-ON DVDRW SOHW-832S atapi Port 1 ID 1 DMA: On
    CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    PIONEER DVD-ROM DVD-117R G: CDRom0
    LITE-ON DVDRW SOHW-832S D: CDRom1
    Generic DVD-ROM H: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 511MB (523808kB)
    Free physical memory: 183MB (188308kB)
    Memory in use : 64 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    26.3.2006
    Burn DVD Image
    7:51:36 AM #1 Text 0 File Reader.cpp, Line 118
    Reader running

    7:51:36 AM #2 Text 0 File Writer.cpp, Line 124
    Writer LITE-ON DVDRW SOHW-832S running

    7:51:36 AM #3 Text 0 File Burncd.cpp, Line 3196
    Turn on Disc-at-once, using DVD media

    7:51:36 AM #4 Text 0 File DlgWaitCD.cpp, Line 244
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2183027 (485:07.02, 4263MB)

    7:51:36 AM #5 Text 0 File DlgWaitCD.cpp, Line 249
    Write in overburning mode: FALSE

    7:51:36 AM #6 Text 0 File DlgWaitCD.cpp, Line 2107
    Recorder: LITE-ON DVDRW SOHW-832S, Media type: DVD+RW
    Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
    Disc Application Code: 0, Extended Information Indicators: 1

    7:51:36 AM #7 Text 0 File DlgWaitCD.cpp, Line 410
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    7:51:36 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2183028 (2183028) = #2183028/485:7.3
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2183028 blocks [LITE-ON DVDRW SOHW-832S ]
    --------------------------------------------------------------

    7:51:36 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 982
    Prepare recorder [LITE-ON DVDRW SOHW-832S ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4470841344, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2183028 | lead-out | 1 | 0x00 | 0x41

    7:51:36 AM #10 Phase 24 File dlgbrnst.cpp, Line 1836
    Caching of files started

    7:51:37 AM #11 Text 0 File Burncd.cpp, Line 4206
    Cache writing successful.

    7:51:37 AM #12 Phase 25 File dlgbrnst.cpp, Line 1836
    Caching of files completed

    7:51:37 AM #13 Phase 36 File dlgbrnst.cpp, Line 1836
    Burn process started at 4x (5,520 KB/s)

    7:51:37 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2345
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    7:51:37 AM #15 Text 0 File Cdrdrv.cpp, Line 8063
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+RW (9), Part Version: 2
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 25E0BF h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 1 h
    Disc Manufacturer ID: RICOHJPN
    Media type ID: W11
    Product revision number: 1
    Number of Physical format information bytes in use in ADIP up to byte 63: 57
    Media Specific [16..63]:
    00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
    23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
    6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............

    7:51:37 AM #16 Text 0 File dlgbrnst.cpp, Line 1694
    Set remaining time: 13:40,452 (820452ms) -> OK

    7:51:37 AM #17 Text 0 File DVDPlusRW.cpp, Line 618
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    7:51:40 AM #18 SCSI -1046 File Cdrdrv.cpp, Line 1441
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04A50000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x06
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x06

    7:51:40 AM #19 CDR -1046 File Writer.cpp, Line 304
    Illegal disc

    7:51:40 AM #20 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    7:51:40 AM #21 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    7:51:40 AM #22 Text 0 File dlgbrnst.cpp, Line 1694
    Set remaining time: 0:00,000 (0ms) -> OK

    7:51:40 AM #23 Text 0 File dlgbrnst.cpp, Line 1694
    Set remaining time: 0:00,000 (0ms) -> OK

    7:51:40 AM #24 Phase 38 File dlgbrnst.cpp, Line 1836
    Burn process failed at 4x (5,520 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 8/29/2004 9:50:34 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 7/16/2003 11:18:32 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
    Nero version: 6.3.1.11
    Recorder: <LITE-ON DVDRW SOHW-832S> Version: CG4E - HA 1 TA 1 - 6.3.1.11
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <PIONEER DVD-ROM DVD-117R>Version: 1.04 - HA 1 TA 0 - 6.3.1.11
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1600JB-00HUA0 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : ST360020A atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : PIONEER DVD-ROM DVD-117R atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : LITE-ON DVDRW SOHW-832S atapi Port 1 ID 1 DMA: On
    CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    PIONEER DVD-ROM DVD-117R G: CDRom0
    LITE-ON DVDRW SOHW-832S D: CDRom1
    Generic DVD-ROM H: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 511MB (523808kB)
    Free physical memory: 183MB (188404kB)
    Memory in use : 64 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    26.3.2006
    Burn DVD Image
    7:52:20 AM #1 Text 0 File Reader.cpp, Line 118
    Reader running

    7:52:20 AM #2 Text 0 File Writer.cpp, Line 124
    Writer LITE-ON DVDRW SOHW-832S running

    7:52:20 AM #3 Text 0 File Burncd.cpp, Line 3196
    Turn on Disc-at-once, using DVD media

    7:52:20 AM #4 Text 0 File DlgWaitCD.cpp, Line 244
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2285751 (507:56.51, 4464MB)

    7:52:20 AM #5 Text 0 File DlgWaitCD.cpp, Line 249
    Write in overburning mode: FALSE

    7:52:20 AM #6 Text 0 File DlgWaitCD.cpp, Line 2107
    Recorder: LITE-ON DVDRW SOHW-832S, Media type: DVD+RW
    Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
    Disc Application Code: 0, Extended Information Indicators: 1

    7:52:20 AM #7 Text 0 File DlgWaitCD.cpp, Line 410
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    7:52:20 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2285752 (2285752) = #2285752/507:56.52
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285752 blocks [LITE-ON DVDRW SOHW-832S ]
    --------------------------------------------------------------

    7:52:20 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 982
    Prepare recorder [LITE-ON DVDRW SOHW-832S ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681220096, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2285752 | lead-out | 1 | 0x00 | 0x41

    7:52:20 AM #10 Phase 24 File dlgbrnst.cpp, Line 1836
    Caching of files started

    7:52:21 AM #11 Text 0 File Burncd.cpp, Line 4206
    Cache writing successful.

    7:52:21 AM #12 Phase 25 File dlgbrnst.cpp, Line 1836
    Caching of files completed

    7:52:21 AM #13 Phase 36 File dlgbrnst.cpp, Line 1836
    Burn process started at 4x (5,520 KB/s)

    7:52:21 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2345
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    7:52:21 AM #15 Text 0 File Cdrdrv.cpp, Line 8063
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+RW (9), Part Version: 2
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 25E0BF h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 1 h
    Disc Manufacturer ID: RICOHJPN
    Media type ID: W11
    Product revision number: 1
    Number of Physical format information bytes in use in ADIP up to byte 63: 57
    Media Specific [16..63]:
    00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
    23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
    6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............

    7:52:21 AM #16 Text 0 File dlgbrnst.cpp, Line 1694
    Set remaining time: 14:17,537 (857537ms) -> OK

    7:52:21 AM #17 Text 0 File DVDPlusRW.cpp, Line 618
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    7:52:23 AM #18 SCSI -1046 File Cdrdrv.cpp, Line 1441
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04A50000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x06
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x06

    7:52:23 AM #19 CDR -1046 File Writer.cpp, Line 304
    Illegal disc

    7:52:23 AM #20 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    7:52:23 AM #21 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    7:52:23 AM #22 Text 0 File dlgbrnst.cpp, Line 1694
    Set remaining time: 0:00,000 (0ms) -> OK

    7:52:23 AM #23 Text 0 File dlgbrnst.cpp, Line 1694
    Set remaining time: 0:00,000 (0ms) -> OK

    7:52:23 AM #24 Phase 38 File dlgbrnst.cpp, Line 1836
    Burn process failed at 4x (5,520 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 8/29/2004 9:50:34 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 7/16/2003 11:18:32 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
    Nero version: 6.3.1.11
    Recorder: <LITE-ON DVDRW SOHW-832S> Version: CG4E - HA 1 TA 1 - 6.3.1.11
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <PIONEER DVD-ROM DVD-117R>Version: 1.04 - HA 1 TA 0 - 6.3.1.11
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1600JB-00HUA0 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : ST360020A atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : PIONEER DVD-ROM DVD-117R atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : LITE-ON DVDRW SOHW-832S atapi Port 1 ID 1 DMA: On
    CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    PIONEER DVD-ROM DVD-117R G: CDRom0
    LITE-ON DVDRW SOHW-832S D: CDRom1
    Generic DVD-ROM H: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 511MB (523808kB)
    Free physical memory: 130MB (133372kB)
    Memory in use : 74 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    26.3.2006
    Burn DVD Image
    9:18:06 AM #1 Text 0 File Reader.cpp, Line 118
    Reader running

    9:18:06 AM #2 Text 0 File Writer.cpp, Line 124
    Writer LITE-ON DVDRW SOHW-832S running

    9:18:06 AM #3 Text 0 File Burncd.cpp, Line 3196
    Turn on Disc-at-once, using DVD media

    9:18:06 AM #4 Text 0 File DlgWaitCD.cpp, Line 244
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2285751 (507:56.51, 4464MB)

    9:18:06 AM #5 Text 0 File DlgWaitCD.cpp, Line 249
    Write in overburning mode: FALSE

    9:18:06 AM #6 Text 0 File DlgWaitCD.cpp, Line 2107
    Recorder: LITE-ON DVDRW SOHW-832S, Media type: DVD+RW
    Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
    Disc Application Code: 0, Extended Information Indicators: 1

    9:18:06 AM #7 Text 0 File DlgWaitCD.cpp, Line 410
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    9:18:06 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2285752 (2285752) = #2285752/507:56.52
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285752 blocks [LITE-ON DVDRW SOHW-832S ]
    --------------------------------------------------------------

    9:18:06 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 982
    Prepare recorder [LITE-ON DVDRW SOHW-832S ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681220096, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2285752 | lead-out | 1 | 0x00 | 0x41

    9:18:06 AM #10 Phase 24 File dlgbrnst.cpp, Line 1836
    Caching of files started

    9:18:07 AM #11 Text 0 File Burncd.cpp, Line 4206
    Cache writing successful.

    9:18:07 AM #12 Phase 25 File dlgbrnst.cpp, Line 1836
    Caching of files completed

    9:18:07 AM #13 Phase 36 File dlgbrnst.cpp, Line 1836
    Burn process started at 4x (5,520 KB/s)

    9:18:07 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2345
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    9:18:07 AM #15 Text 0 File Cdrdrv.cpp, Line 8063
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+RW (9), Part Version: 2
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 25E0BF h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 1 h
    Disc Manufacturer ID: RICOHJPN
    Media type ID: W11
    Product revision number: 1
    Number of Physical format information bytes in use in ADIP up to byte 63: 57
    Media Specific [16..63]:
    00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
    23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
    6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............

    9:18:07 AM #16 Text 0 File dlgbrnst.cpp, Line 1694
    Set remaining time: 14:17,537 (857537ms) -> OK

    9:18:07 AM #17 Text 0 File DVDPlusRW.cpp, Line 618
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    9:18:09 AM #18 SCSI -1046 File Cdrdrv.cpp, Line 1441
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x09A80000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x06
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x06

    9:18:09 AM #19 CDR -1046 File Writer.cpp, Line 304
    Illegal disc

    9:18:09 AM #20 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    9:18:09 AM #21 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    9:18:09 AM #22 Text 0 File dlgbrnst.cpp, Line 1694
    Set remaining time: 0:00,000 (0ms) -> OK

    9:18:09 AM #23 Text 0 File dlgbrnst.cpp, Line 1694
    Set remaining time: 0:00,000 (0ms) -> OK

    9:18:09 AM #24 Phase 38 File dlgbrnst.cpp, Line 1836
    Burn process failed at 4x (5,520 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 8/29/2004 9:50:34 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 7/16/2003 11:18:32 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
    Nero version: 6.3.1.11
    Recorder: <LITE-ON DVDRW SOHW-832S> Version: CG4E - HA 1 TA 1 - 6.3.1.11
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <PIONEER DVD-ROM DVD-117R>Version: 1.04 - HA 1 TA 0 - 6.3.1.11
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1600JB-00HUA0 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : ST360020A atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : PIONEER DVD-ROM DVD-117R atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : LITE-ON DVDRW SOHW-832S atapi Port 1 ID 1 DMA: On
    CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    PIONEER DVD-ROM DVD-117R G: CDRom0
    LITE-ON DVDRW SOHW-832S D: CDRom1
    Generic DVD-ROM H: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 511MB (523808kB)
    Free physical memory: 129MB (132644kB)
    Memory in use : 74 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    26.3.2006
    Burn DVD Image
    9:19:09 AM #1 Text 0 File Reader.cpp, Line 118
    Reader running

    9:19:09 AM #2 Text 0 File Writer.cpp, Line 124
    Writer LITE-ON DVDRW SOHW-832S running

    9:19:09 AM #3 Text 0 File Burncd.cpp, Line 3196
    Turn on Disc-at-once, using DVD media

    9:19:09 AM #4 Text 0 File DlgWaitCD.cpp, Line 244
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2183027 (485:07.02, 4263MB)

    9:19:09 AM #5 Text 0 File DlgWaitCD.cpp, Line 249
    Write in overburning mode: FALSE

    9:19:09 AM #6 Text 0 File DlgWaitCD.cpp, Line 2107
    Recorder: LITE-ON DVDRW SOHW-832S, Media type: DVD+RW
    Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
    Disc Application Code: 0, Extended Information Indicators: 1

    9:19:09 AM #7 Text 0 File DlgWaitCD.cpp, Line 410
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    9:19:09 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2183028 (2183028) = #2183028/485:7.3
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2183028 blocks [LITE-ON DVDRW SOHW-832S ]
    --------------------------------------------------------------

    9:19:10 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 982
    Prepare recorder [LITE-ON DVDRW SOHW-832S ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4470841344, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2183028 | lead-out | 1 | 0x00 | 0x41

    9:19:10 AM #10 Phase 24 File dlgbrnst.cpp, Line 1836
    Caching of files started

    9:19:10 AM #11 Text 0 File Burncd.cpp, Line 4206
    Cache writing successful.

    9:19:10 AM #12 Phase 25 File dlgbrnst.cpp, Line 1836
    Caching of files completed

    9:19:10 AM #13 Phase 36 File dlgbrnst.cpp, Line 1836
    Burn process started at 4x (5,520 KB/s)

    9:19:11 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2345
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    9:19:11 AM #15 Text 0 File Cdrdrv.cpp, Line 8063
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+RW (9), Part Version: 2
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 25E0BF h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 1 h
    Disc Manufacturer ID: RICOHJPN
    Media type ID: W11
    Product revision number: 1
    Number of Physical format information bytes in use in ADIP up to byte 63: 57
    Media Specific [16..63]:
    00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
    23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
    6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............

    9:19:11 AM #16 Text 0 File dlgbrnst.cpp, Line 1694
    Set remaining time: 13:40,452 (820452ms) -> OK

    9:19:11 AM #17 Text 0 File DVDPlusRW.cpp, Line 618
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    9:19:14 AM #18 SCSI -1046 File Cdrdrv.cpp, Line 1441
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x09A80000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x06
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x06

    9:19:14 AM #19 CDR -1046 File Writer.cpp, Line 304
    Illegal disc

    9:19:14 AM #20 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    9:19:14 AM #21 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    9:19:14 AM #22 Text 0 File dlgbrnst.cpp, Line 1694
    Set remaining time: 0:00,000 (0ms) -> OK

    9:19:14 AM #23 Text 0 File dlgbrnst.cpp, Line 1694
    Set remaining time: 0:00,000 (0ms) -> OK

    9:19:14 AM #24 Phase 38 File dlgbrnst.cpp, Line 1836
    Burn process failed at 4x (5,520 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 8/29/2004 9:50:34 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 7/16/2003 11:18:32 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
    Nero version: 6.3.1.11
    Recorder: <LITE-ON DVDRW SOHW-832S> Version: CG4E - HA 1 TA 1 - 6.3.1.11
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <PIONEER DVD-ROM DVD-117R>Version: 1.04 - HA 1 TA 0 - 6.3.1.11
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1600JB-00HUA0 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : ST360020A atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : PIONEER DVD-ROM DVD-117R atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : LITE-ON DVDRW SOHW-832S atapi Port 1 ID 1 DMA: On
    CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    PIONEER DVD-ROM DVD-117R G: CDRom0
    LITE-ON DVDRW SOHW-832S D: CDRom1
    Generic DVD-ROM H: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 511MB (523808kB)
    Free physical memory: 131MB (134456kB)
    Memory in use : 74 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    26.3.2006
    Burn DVD Image
    9:22:32 AM #1 Text 0 File Reader.cpp, Line 118
    Reader running

    9:22:32 AM #2 Text 0 File Writer.cpp, Line 124
    Writer LITE-ON DVDRW SOHW-832S running

    9:22:32 AM #3 Text 0 File Burncd.cpp, Line 3196
    Turn on Disc-at-once, using DVD media

    9:22:32 AM #4 Text 0 File DlgWaitCD.cpp, Line 244
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2183027 (485:07.02, 4263MB)

    9:22:32 AM #5 Text 0 File DlgWaitCD.cpp, Line 249
    Write in overburning mode: FALSE

    9:22:32 AM #6 Text 0 File DlgWaitCD.cpp, Line 2107
    Recorder: LITE-ON DVDRW SOHW-832S, Media type: DVD+RW
    Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
    Disc Application Code: 0, Extended Information Indicators: 1

    9:22:32 AM #7 Text 0 File DlgWaitCD.cpp, Line 410
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    9:22:32 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2183028 (2183028) = #2183028/485:7.3
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2183028 blocks [LITE-ON DVDRW SOHW-832S ]
    --------------------------------------------------------------

    9:22:32 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 982
    Prepare recorder [LITE-ON DVDRW SOHW-832S ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4470841344, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2183028 | lead-out | 1 | 0x00 | 0x41

    9:22:33 AM #10 Phase 24 File dlgbrnst.cpp, Line 1836
    Caching of files started

    9:22:33 AM #11 Text 0 File Burncd.cpp, Line 4206
    Cache writing successful.

    9:22:33 AM #12 Phase 25 File dlgbrnst.cpp, Line 1836
    Caching of files completed

    9:22:33 AM #13 Phase 36 File dlgbrnst.cpp, Line 1836
    Burn process started at 4x (5,520 KB/s)

    9:22:33 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2345
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    9:22:33 AM #15 Text 0 File Cdrdrv.cpp, Line 8063
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+RW (9), Part Version: 2
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 25E0BF h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 1 h
    Disc Manufacturer ID: RICOHJPN
    Media type ID: W11
    Product revision number: 1
    Number of Physical format information bytes in use in ADIP up to byte 63: 57
    Media Specific [16..63]:
    00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
    23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
    6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............

    9:22:33 AM #16 Text 0 File dlgbrnst.cpp, Line 1694
    Set remaining time: 13:40,452 (820452ms) -> OK

    9:22:33 AM #17 Text 0 File DVDPlusRW.cpp, Line 618
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    9:22:35 AM #18 SCSI -1046 File Cdrdrv.cpp, Line 1441
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04F20000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x06
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x06

    9:22:35 AM #19 CDR -1046 File Writer.cpp, Line 304
    Illegal disc

    9:22:35 AM #20 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    9:22:36 AM #21 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    9:22:36 AM #22 Text 0 File dlgbrnst.cpp, Line 1694
    Set remaining time: 0:00,000 (0ms) -> OK

    9:22:36 AM #23 Text 0 File dlgbrnst.cpp, Line 1694
    Set remaining time: 0:00,000 (0ms) -> OK

    9:22:36 AM #24 Phase 38 File dlgbrnst.cpp, Line 1836
    Burn process failed at 4x (5,520 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 8/29/2004 9:50:34 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 7/16/2003 11:18:32 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    Tiffany Pham
    Home
    1A20-0218-0370-1725-8155-4331*
    1A21-0009-2030-2394-2385-0886

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
    Nero version: 6.3.1.11
    Recorder: <LITE-ON DVDRW SOHW-832S> Version: CG4E - HA 1 TA 1 - 6.3.1.11
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <PIONEER DVD-ROM DVD-117R>Version: 1.04 - HA 1 TA 0 - 6.3.1.11
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1600JB-00HUA0 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : ST360020A atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : PIONEER DVD-ROM DVD-117R atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : LITE-ON DVDRW SOHW-832S atapi Port 1 ID 1 DMA: On
    CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    PIONEER DVD-ROM DVD-117R G: CDRom0
    LITE-ON DVDRW SOHW-832S D: CDRom1
    Generic DVD-ROM H: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 511MB (523808kB)
    Free physical memory: 117MB (119900kB)
    Memory in use : 77 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    26.3.2006
    Burn DVD Image
    9:30:39 AM #1 Text 0 File Reader.cpp, Line 118
    Reader running

    9:30:39 AM #2 Text 0 File Writer.cpp, Line 124
    Writer LITE-ON DVDRW SOHW-832S running

    9:30:39 AM #3 Text 0 File Burncd.cpp, Line 3196
    Turn on Disc-at-once, using DVD media

    9:30:39 AM #4 Text 0 File DlgWaitCD.cpp, Line 244
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2183027 (485:07.02, 4263MB)

    9:30:39 AM #5 Text 0 File DlgWaitCD.cpp, Line 249
    Write in overburning mode: FALSE

    9:30:40 AM #6 Text 0 File DlgWaitCD.cpp, Line 2107
    Recorder: LITE-ON DVDRW SOHW-832S, Media type: DVD+RW
    Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
    Disc Application Code: 0, Extended Information Indicators: 1

    9:30:40 AM #7 Text 0 File DlgWaitCD.cpp, Line 410
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    9:30:40 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2183028 (2183028) = #2183028/485:7.3
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2183028 blocks [LITE-ON DVDRW SOHW-832S ]
    --------------------------------------------------------------

    9:30:40 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 982
    Prepare recorder [LITE-ON DVDRW SOHW-832S ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4470841344, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2183028 | lead-out | 1 | 0x00 | 0x41

    9:30:40 AM #10 Phase 24 File dlgbrnst.cpp, Line 1836
    Caching of files started

    9:30:40 AM #11 Text 0 File Burncd.cpp, Line 4206
    Cache writing successful.

    9:30:40 AM #12 Phase 25 File dlgbrnst.cpp, Line 1836
    Caching of files completed

    9:30:40 AM #13 Phase 36 File dlgbrnst.cpp, Line 1836
    Burn process started at 4x (5,520 KB/s)

    9:30:40 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2345
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    9:30:40 AM #15 Text 0 File Cdrdrv.cpp, Line 8063
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+RW (9), Part Version: 2
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 25E0BF h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 1 h
    Disc Manufacturer ID: RICOHJPN
    Media type ID: W11
    Product revision number: 1
    Number of Physical format information bytes in use in ADIP up to byte 63: 57
    Media Specific [16..63]:
    00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
    23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
    6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............

    9:30:40 AM #16 Text 0 File dlgbrnst.cpp, Line 1694
    Set remaining time: 13:40,452 (820452ms) -> OK

    9:30:40 AM #17 Text 0 File DVDPlusRW.cpp, Line 618
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    9:30:43 AM #18 SCSI -1046 File Cdrdrv.cpp, Line 1441
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04F80000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x06
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x06

    9:30:43 AM #19 CDR -1046 File Writer.cpp, Line 304
    Illegal disc

    9:30:43 AM #20 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    9:30:43 AM #21 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    9:30:44 AM #22 Text 0 File dlgbrnst.cpp, Line 1694
    Set remaining time: 0:00,000 (0ms) -> OK

    9:30:44 AM #23 Text 0 File dlgbrnst.cpp, Line 1694
    Set remaining time: 0:00,000 (0ms) -> OK

    9:30:44 AM #24 Phase 38 File dlgbrnst.cpp, Line 1836
    Burn process failed at 4x (5,520 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 8/29/2004 9:50:34 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 7/16/2003 11:18:32 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
    Tiffany Pham
    Home
    1A20-0218-0370-1725-8155-4331*
    1A21-0009-2030-2394-2385-0886

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
    Nero version: 6.3.1.11
    Recorder: <LITE-ON DVDRW SOHW-832S> Version: CG4E - HA 1 TA 1 - 6.3.1.11
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <PIONEER DVD-ROM DVD-117R>Version: 1.04 - HA 1 TA 0 - 6.3.1.11
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1600JB-00HUA0 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : ST360020A atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : PIONEER DVD-ROM DVD-117R atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : LITE-ON DVDRW SOHW-832S atapi Port 1 ID 1 DMA: On
    CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    PIONEER DVD-ROM DVD-117R G: CDRom0
    LITE-ON DVDRW SOHW-832S D: CDRom1
    Generic DVD-ROM H: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 511MB (523808kB)
    Free physical memory: 153MB (157476kB)
    Memory in use : 69 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    26.3.2006
    Burn DVD Image
    10:06:06 AM #1 Text 0 File Reader.cpp, Line 118
    Reader running

    10:06:06 AM #2 Text 0 File Writer.cpp, Line 124
    Writer LITE-ON DVDRW SOHW-832S running

    10:06:06 AM #3 Text 0 File Burncd.cpp, Line 3196
    Turn on Disc-at-once, using DVD media

    10:06:07 AM #4 Text 0 File DlgWaitCD.cpp, Line 244
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2183027 (485:07.02, 4263MB)

    10:06:07 AM #5 Text 0 File DlgWaitCD.cpp, Line 249
    Write in overburning mode: FALSE

    10:06:07 AM #6 Text 0 File DlgWaitCD.cpp, Line 2107
    Recorder: LITE-ON DVDRW SOHW-832S, Media type: DVD+RW
    Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
    Disc Application Code: 0, Extended Information Indicators: 1

    10:06:07 AM #7 Text 0 File DlgWaitCD.cpp, Line 410
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    10:06:07 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2183028 (2183028) = #2183028/485:7.3
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2183028 blocks [LITE-ON DVDRW SOHW-832S ]
    --------------------------------------------------------------

    10:06:07 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 982
    Prepare recorder [LITE-ON DVDRW SOHW-832S ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4470841344, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2183028 | lead-out | 1 | 0x00 | 0x41

    10:06:08 AM #10 Phase 24 File dlgbrnst.cpp, Line 1836
    Caching of files started

    10:06:08 AM #11 Text 0 File Burncd.cpp, Line 4206
    Cache writing successful.

    10:06:08 AM #12 Phase 25 File dlgbrnst.cpp, Line 1836
    Caching of files completed

    10:06:09 AM #13 Phase 36 File dlgbrnst.cpp, Line 1836
    Burn process started at 4x (5,520 KB/s)

    10:06:09 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2345
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    10:06:09 AM #15 Text 0 File Cdrdrv.cpp, Line 8063
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+RW (9), Part Version: 2
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 25E0BF h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 1 h
    Disc Manufacturer ID: RICOHJPN
    Media type ID: W11
    Product revision number: 1
    Number of Physical format information bytes in use in ADIP up to byte 63: 57
    Media Specific [16..63]:
    00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
    23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
    6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............

    10:06:09 AM #16 Text 0 File dlgbrnst.cpp, Line 1694
    Set remaining time: 13:40,452 (820452ms) -> OK

    10:06:09 AM #17 Text 0 File DVDPlusRW.cpp, Line 618
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    10:06:12 AM #18 SCSI -1046 File Cdrdrv.cpp, Line 1441
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04F80000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x06
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x06

    10:06:12 AM #19 CDR -1046 File Writer.cpp, Line 304
    Illegal disc

    10:06:12 AM #20 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    10:06:12 AM #21 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    10:06:12 AM #22 Text 0 File dlgbrnst.cpp, Line 1694
    Set remaining time: 0:00,000 (0ms) -> OK

    10:06:12 AM #23 Text 0 File dlgbrnst.cpp, Line 1694
    Set remaining time: 0:00,000 (0ms) -> OK

    10:06:12 AM #24 Phase 38 File dlgbrnst.cpp, Line 1836
    Burn process failed at 4x (5,520 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 8/29/2004 9:50:34 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 7/16/2003 11:18:32 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
    Nero version: 6.3.1.11
    Recorder: <LITE-ON DVDRW SOHW-832S> Version: CG4E - HA 1 TA 1 - 6.3.1.11
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <PIONEER DVD-ROM DVD-117R>Version: 1.04 - HA 1 TA 0 - 6.3.1.11
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1600JB-00HUA0 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : ST360020A atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : PIONEER DVD-ROM DVD-117R atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : LITE-ON DVDRW SOHW-832S atapi Port 1 ID 1 DMA: On
    CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    PIONEER DVD-ROM DVD-117R G: CDRom0
    LITE-ON DVDRW SOHW-832S D: CDRom1
    Generic DVD-ROM H: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 511MB (523808kB)
    Free physical memory: 183MB (187532kB)
    Memory in use : 64 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    26.3.2006
    Burn DVD Image
    9:57:37 PM #1 Text 0 File Reader.cpp, Line 118
    Reader running

    9:57:37 PM #2 Text 0 File Writer.cpp, Line 124
    Writer LITE-ON DVDRW SOHW-832S running

    9:57:37 PM #3 Text 0 File Burncd.cpp, Line 3196
    Turn on Disc-at-once, using DVD media

    9:57:38 PM #4 Text 0 File DlgWaitCD.cpp, Line 244
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2183027 (485:07.02, 4263MB)

    9:57:38 PM #5 Text 0 File DlgWaitCD.cpp, Line 249
    Write in overburning mode: FALSE

    9:57:38 PM #6 Text 0 File DlgWaitCD.cpp, Line 2107
    Recorder: LITE-ON DVDRW SOHW-832S, Media type: DVD+RW
    Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
    Disc Application Code: 0, Extended Information Indicators: 1

    9:57:38 PM #7 Text 0 File DlgWaitCD.cpp, Line 410
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    9:57:38 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2183028 (2183028) = #2183028/485:7.3
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2183028 blocks [LITE-ON DVDRW SOHW-832S ]
    --------------------------------------------------------------

    9:57:38 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 982
    Prepare recorder [LITE-ON DVDRW SOHW-832S ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4470841344, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2183028 | lead-out | 1 | 0x00 | 0x41

    9:57:39 PM #10 Phase 24 File dlgbrnst.cpp, Line 1836
    Caching of files started

    9:57:39 PM #11 Text 0 File Burncd.cpp, Line 4206
    Cache writing successful.

    9:57:39 PM #12 Phase 25 File dlgbrnst.cpp, Line 1836
    Caching of files completed

    9:57:39 PM #13 Phase 36 File dlgbrnst.cpp, Line 1836
    Burn process started at 4x (5,520 KB/s)

    9:57:39 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2345
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    9:57:39 PM #15 Text 0 File Cdrdrv.cpp, Line 8063
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+RW (9), Part Version: 2
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 25E0BF h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 1 h
    Disc Manufacturer ID: RICOHJPN
    Media type ID: W11
    Product revision number: 1
    Number of Physical format information bytes in use in ADIP up to byte 63: 57
    Media Specific [16..63]:
    00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
    23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
    6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............

    9:57:39 PM #16 Text 0 File dlgbrnst.cpp, Line 1694
    Set remaining time: 13:40,452 (820452ms) -> OK

    9:57:39 PM #17 Text 0 File DVDPlusRW.cpp, Line 618
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    9:57:42 PM #18 SCSI -1046 File Cdrdrv.cpp, Line 1441
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x09920000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x06
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x06

    9:57:42 PM #19 CDR -1046 File Writer.cpp, Line 304
    Illegal disc

    9:57:42 PM #20 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    9:57:42 PM #21 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    9:57:42 PM #22 Text 0 File dlgbrnst.cpp, Line 1694
    Set remaining time: 0:00,000 (0ms) -> OK

    9:57:42 PM #23 Text 0 File dlgbrnst.cpp, Line 1694
    Set remaining time: 0:00,000 (0ms) -> OK

    9:57:42 PM #24 Phase 38 File dlgbrnst.cpp, Line 1836
    Burn process failed at 4x (5,520 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 8/29/2004 9:50:34 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 7/16/2003 11:18:32 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======



    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM
    Nero version: 6.3.1.11
    Recorder: <LITE-ON DVDRW SOHW-832S> Version: CG4E - HA 1 TA 1 - 6.3.1.11
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <PIONEER DVD-ROM DVD-117R>Version: 1.04 - HA 1 TA 0 - 6.3.1.11
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD1600JB-00HUA0 atapi Port 0 ID 0 DMA: On
    DiskPeripheral : ST360020A atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : PIONEER DVD-ROM DVD-117R atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : LITE-ON DVDRW SOHW-832S atapi Port 1 ID 1 DMA: On
    CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    PIONEER DVD-ROM DVD-117R G: CDRom0
    LITE-ON DVDRW SOHW-832S D: CDRom1
    Generic DVD-ROM H: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 511MB (523808kB)
    Free physical memory: 144MB (147932kB)
    Memory in use : 71 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    26.3.2006
    Burn DVD Image
    10:06:39 PM #1 Text 0 File Reader.cpp, Line 118
    Reader running

    10:06:39 PM #2 Text 0 File Writer.cpp, Line 124
    Writer LITE-ON DVDRW SOHW-832S running

    10:06:39 PM #3 Text 0 File Burncd.cpp, Line 3196
    Turn on Disc-at-once, using DVD media

    10:06:39 PM #4 Text 0 File DlgWaitCD.cpp, Line 244
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2183027 (485:07.02, 4263MB)

    10:06:39 PM #5 Text 0 File DlgWaitCD.cpp, Line 249
    Write in overburning mode: FALSE

    10:06:39 PM #6 Text 0 File DlgWaitCD.cpp, Line 2107
    Recorder: LITE-ON DVDRW SOHW-832S, Media type: DVD+RW
    Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
    Disc Application Code: 0, Extended Information Indicators: 1

    10:06:39 PM #7 Text 0 File DlgWaitCD.cpp, Line 410
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    10:06:39 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2183028 (2183028) = #2183028/485:7.3
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2183028 blocks [LITE-ON DVDRW SOHW-832S ]
    --------------------------------------------------------------

    10:06:39 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 982
    Prepare recorder [LITE-ON DVDRW SOHW-832S ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc not fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4470841344, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2183028 | lead-out | 1 | 0x00 | 0x41

    10:06:39 PM #10 Phase 24 File dlgbrnst.cpp, Line 1836
    Caching of files started

    10:06:39 PM #11 Text 0 File Burncd.cpp, Line 4206
    Cache writing successful.

    10:06:39 PM #12 Phase 25 File dlgbrnst.cpp, Line 1836
    Caching of files completed

    10:06:40 PM #13 Phase 36 File dlgbrnst.cpp, Line 1836
    Burn process started at 4x (5,520 KB/s)

    10:06:40 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2345
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    10:06:40 PM #15 Text 0 File Cdrdrv.cpp, Line 8063
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+RW (9), Part Version: 2
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 25E0BF h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 1 h
    Disc Manufacturer ID: RICOHJPN
    Media type ID: W11
    Product revision number: 1
    Number of Physical format information bytes in use in ADIP up to byte 63: 57
    Media Specific [16..63]:
    00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
    23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
    6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............

    10:06:40 PM #16 Text 0 File dlgbrnst.cpp, Line 1694
    Set remaining time: 13:40,452 (820452ms) -> OK

    10:06:40 PM #17 Text 0 File DVDPlusRW.cpp, Line 618
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    10:06:44 PM #18 SCSI -1046 File Cdrdrv.cpp, Line 1441
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x09B20000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x06
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x06

    10:06:44 PM #19 CDR -1046 File Writer.cpp, Line 304
    Illegal disc

    10:06:44 PM #20 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    10:06:44 PM #21 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    10:06:44 PM #22 Text 0 File dlgbrnst.cpp, Line 1694
    Set remaining time: 0:00,000 (0ms) -> OK

    10:06:44 PM #23 Text 0 File dlgbrnst.cpp, Line 1694
    Set remaining time: 0:00,000 (0ms) -> OK

    10:06:44 PM #24 Phase 38 File dlgbrnst.cpp, Line 1836
    Burn process failed at 4x (5,520 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 8/29/2004 9:50:34 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 7/16/2003 11:18:32 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    ====== *** Nero-Burning Rom, History File *** ======
     
    Last edited: Mar 27, 2006
  17. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    @andyp95
    Sorry I should have told you how the logs are separated by:
    ====== *** Nero Burning ROM, History File *** ======
    So you should edit your post somewhat - at least get the Nero serial #'s out - they begin w/ 1A and 5C - they're in there quite a few places. Could also leave the last 6 log and 7 log.
    But having all these logs did show that your drive does not like Ricoh +RW media!
    From what I can see you went from the latest stock firmware of VSOM to patched firmware of CG4E - and it still doesn't like it.
    Now the choice is yours whether to use the patched or stock - the most current patched firmware is CG5J - you can find it here:
    http://codeguys.rpc1.org/firmwares.html
    Just look for your drive.
    Or you go back to VSOM.
    Either way I would use the latest firmware.
    I would also switch from the Ricoh +rw and pick up some Verbatim +/-R's or made in Japan Sony or Fuji.

    Also you can update to the latest version of Nero - 7.0.8.2 -
    http://ww2.nero.com/nero7/enu/nero7-up.php

    On of your rom's is not in DMA - Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off see Gwen's post above for a link if needed.

    I also saw your memory go up and down from the different logs - the lowest being 1mb left - 99% in use - so no multi tasking while burning.
    I think that't it!
     
    Last edited: Mar 27, 2006
  18. andyp95

    andyp95 Member

    Joined:
    Mar 27, 2006
    Messages:
    33
    Likes Received:
    0
    Trophy Points:
    16
    This is giving me so much headach. I tried everything, still doesn't work. I don't know whether I should do the system recovery for my computer hoping everything will be ok again.
     
  19. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    @andyp95
    Yeah it can give you a headache :)
    What changed on the pc since yesterday when this problem started happening?
    Which firmware are you going with?
    You also might want to check the drives cables and make sure they're still secure.
    I would still try some other media - if your in the US Best Buy has 50 Sony for 14.99 (look for made in japan) and 25 verbatim for 7.99 on sale this week.
     
  20. andyp95

    andyp95 Member

    Joined:
    Mar 27, 2006
    Messages:
    33
    Likes Received:
    0
    Trophy Points:
    16
    hi binkie,
    I guess it's the windows updating. I was doing everything I normally do, then I suddenly realized I haven't updated my pc since I bought it. After updating, I didn't burn anything till yesterday but I am not sure if that's the caused. I went back and update the new firmware CG5J you suggested. It doesn't help though, but thanks for trying to help me.
     

Share This Page