1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Nero error - illegal disc

Discussion in 'Nero discussion' started by zebra2321, Mar 26, 2006.

  1. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    Well you'd have to upgrade your cpu. Can you system support that?
    Me - I would stick with getting a burner that met or was under my system specs. I ran an internal a while back(or tried I should say) that didn't meet the cpu requirements but just meet the ram - too many problems.
    Have a good weekend too!
     
  2. andyp95

    andyp95 Member

    Joined:
    Mar 27, 2006
    Messages:
    33
    Likes Received:
    0
    Trophy Points:
    16
    Hi Blinke,
    I cancelled that drive since it also requires usb 2.0, and I don't have that.
    I just place an order for Benq 1655 internal burner, internal burner are usually work w/most computers right? Or there's anything that I need to watch for? My computer is around 6 yrs old now.
    What I'm worrying about is that I'm afraid it's not my burner but pc errors therfore even if I bought a new burner I wouldn't able to burn.
    This is because I've been testing w/the burner. It sometimes recognizes all dvdr media, and also burn successfully but when I put it in the dvd player it said" No Disc" or "Disc Error". Some of the times, it wouldn't burn anything at all.
     
    Last edited: Apr 7, 2006
  3. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    Hi andyp95
    Yes internal burners will work w/ pc's - just make sure you meet the minimum requirements. Make sure you have it on separate power supply.
    I'm thinking your current one on it's way out.
    When you get the new one 1st thing make sure the firmware is current - it may be new but the firmware has probably been updated.
    Few other things to do (very doubtful will help current burning sitation -but good to do)- run a virus scan, do a disc cleanup and a system defrag.
    Let us know how turns it!!
     
    Last edited: Apr 7, 2006
  4. andyp95

    andyp95 Member

    Joined:
    Mar 27, 2006
    Messages:
    33
    Likes Received:
    0
    Trophy Points:
    16
    Thanks for the tip Binkie.
    I did everything you mentioned..it didn't help though.
    I'll let u know how it turns out after I install my burner (hopefully I do it right , sighhh **)

    "Make sure you have it on separate power supply." by this, do you mean separate power for the internal drive itself? Sorry, I've never install a burner before, so I'm nout sure if that's what you're talking about. So there's a power supply along w/the cables itself?
    Should I order the cables for installation too?

    Some silly questions, but here's the requirements:
    IBM PC compatible
    Pentium III 550MHz CPU
    128MB DRAM, ettc...

    Does IBM PC compatible meant any pc is ok? Or does it has to be made my IBM? I'm using a Sony one. And my is 512 MB SdRAM, is it larger than 128mb DRam?
     
    Last edited: Apr 7, 2006
  5. MaxBurn

    MaxBurn Regular member

    Joined:
    Sep 9, 2005
    Messages:
    1,274
    Likes Received:
    0
    Trophy Points:
    46
    Hi andyp95,
    Ill try to answer some of those questions for you.
    Once you install a new burner, i think you will realize how easy it is. For most new tower cases, there are only two thumb screws holding on one side plate. Once that is removed, the drives are exposed. Most have 2 cables connecting the drive, and 2 phillips head screws holding the drive itself in. The seperate power supply warning means use a power line from the power supply for that drive only. Dont connect it to one that is also powering something else. The drive should be configured that way already, but if not, most cases have extra power leads dangling there, or tied back to the case, but not being used.
    Since you are replacing a drive, you will probably re-use the existing cables, no need to order any extra parts.
    IBM PC compatible, doesnt have to be made by IBM (i think they got out of the PC business a year or so ago).
    Going with the internal drive is the way to go. You dont have extra stuff hanging out of the computer. The hardest part for you might be setting the drive to master, or cable select, but it will have pictures, and is probably already set correctly.
    Your 512mb is ok, but you might want to upgrade to 1GB in the future. When you get the case off, get rid of any dust, and check the fans for dust while you are at it. Just read the instructions that come with the drive, and you should have no problems. I swapped my last drive out in 10 minutes, but i took time to clean the inside of the case, thats why it took so long.
    Good luck. Sometimes these drives just die, and replacing them is the only way to fix it.
     
  6. andyp95

    andyp95 Member

    Joined:
    Mar 27, 2006
    Messages:
    33
    Likes Received:
    0
    Trophy Points:
    16
    Thanks for the reply Max.
    I've never installed an internal drive myself, so I'm kinda worry. But since everyone saying it's not that complicated, then I guess I'll be okay. I'll let you guys know how it turn out. Hope it's all good, so I don't have to bother you guys one more time hihi

     
  7. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    @andyp95
    You're definitely not bothering us!! I think you'll be fine installing it - maxburn also pointed out the master/slave bit - this will all be in the drive's manual. Not to worry!
    In the mean time til the BenQ comes - have your tried uninstalling the Liteon in device manager then rebooting and letting windows install?
    May not help but may be worth a shot.
     
  8. andyp95

    andyp95 Member

    Joined:
    Mar 27, 2006
    Messages:
    33
    Likes Received:
    0
    Trophy Points:
    16
    Hi Binkie,
    Yes, I've tried that also. Same result though, it didn't help.
    Oh how do I know which is the lastest firmware version available though? I'm ordering a Benq Dw1655 retail box instead of the OEM because I think I'll need the manual guide.
    Thanks again, have a nice weekend everyone.
     
  9. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
  10. BoxOfEyes

    BoxOfEyes Member

    Joined:
    Apr 8, 2006
    Messages:
    17
    Likes Received:
    0
    Trophy Points:
    11
    Hey folks,

    I too just started getting an illegal disc error from Nero (and from DVD Shrink). In fact, I just completed burning a dvd disc and went to burn it again to another disc and got the illegal disc error. Since then, every attempt results in this error. I've tried all burning speeds available, with the same result. I've used this same brand of dvds for a year to a year and a half. The disc that worked came out of the same spindle.

    Any help here would be greatly appreciated! THANK YOU!!!

    Here is my latest log...

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
    Nero Version: 6.6.0.13
    Internal Version: 6, 6, 0, 13c
    (Nero Express)
    Recorder: <_NEC DVD+-RW ND-6500A> Version: 202C - HA 1 TA 0 - 6.6.0.13
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <_NEC DVD+-RW ND-6500A>Version: 202C - HA 1 TA 0 - 6.6.0.13
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : FUJITSU MHU2100AT atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : _NEC DVD+-RW ND-6500A atapi Port 1 ID 0 DMA: On

    === CDRom-Device-Map ===
    _NEC DVD+-RW ND-6500A D: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523496kB)
    Free physical memory: 199MB (204476kB)
    Memory in use : 60
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    6.4.2006
    UDF/ISO compilation
    10:50:19 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation started

    10:50:19 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
    DVD-Video files reallocation completed (no file modified)

    10:50:19 PM #3 Text 0 File Isodoc.cpp, Line 6194
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    10:50:19 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
    DVD-Video files sorted

    10:50:19 PM #5 Text 0 File Reader.cpp, Line 127
    Reader running

    10:50:19 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3293
    First writeable address = 0 (0x00000000)

    10:50:19 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3293
    First writeable address = 0 (0x00000000)

    10:50:19 PM #8 Text 0 File Burncd.cpp, Line 3167
    Turn on Disc-At-Once, using DVD media

    10:50:19 PM #9 Text 0 File DlgWaitCD.cpp, Line 260
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1594527 (354:20.27, 3114MB)

    10:50:19 PM #10 Text 0 File DlgWaitCD.cpp, Line 272
    Write in overburning mode: NO (enabled: CD)

    10:50:19 PM #11 Text 0 File DlgWaitCD.cpp, Line 2339
    Recorder: _NEC DVD+-RW ND-6500A, Media type: DVD-R
    Disc Manufacturer: SONY16 - D1
    Disc Application Code: 64, Disc Physical Code: 193

    10:50:19 PM #12 Text 0 File DlgWaitCD.cpp, Line 438
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    10:50:19 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 1594528 (1594528) = #1594528/354:20.28
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1594528 blocks [_NEC DVD+-RW ND-6500A]
    --------------------------------------------------------------

    10:50:19 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [_NEC DVD+-RW ND-6500A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3265593344, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    1594528 | lead-out | 1 | 0x41 | 0x00

    10:50:19 PM #15 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    10:50:19 PM #16 Text 0 File Burncd.cpp, Line 4051
    Cache writing successful.

    10:50:19 PM #17 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    10:50:19 PM #18 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 2x (2,770 KB/s)

    10:50:19 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2609
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    10:50:19 PM #20 Text 0 File DVDR.cpp, Line 2267
    Recording mode: Sequential Recording Mode

    10:50:19 PM #21 Text 0 File Mmc.cpp, Line 21469
    Set BUFE: JustLink -> ON

    10:50:19 PM #22 Text 0 File DVDR.cpp, Line 2421
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    10:50:19 PM #23 Text 0 File Cdrdrv.cpp, Line 8438
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    10:50:19 PM #24 SCSI -1046 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x54 0xA0 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    10:50:19 PM #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1765
    Illegal disc

    10:50:19 PM #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1765
    Could not perform start of Disc-at-once

    10:50:19 PM #27 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 2x (2,770 KB/s)


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 4:07:32 PM
    File 'Drivers\CDRALW2K.SYS': Ver=7.5.0.47 , size=24960 bytes, created 3/8/2005 10:08:42 PM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 2/1/2005 3:03:00 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:44 AM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


     
  11. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    @BoxOfEyes
    Welcome to aD!
    Here's what I can see:
    Your Nero can use an update - update to 6.6.0.18. If you have the full version of Nero here's links for package 1 and package 2:
    http://httpdl1.usw.nero.com/Nero-6.6.0.18_no_yt.exe
    http://httpdl1.usw.nero.com/NVE-3.1.0.21_no_yt.exe
    Your firmware can use an update - the latest is 2.24
    http://support.necsam.com/optical/downloads/flashfirmware/
    Roxio can conflict w/ Nero. Uninstall it and run the zapper to remove all traces.
    http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml
    Good discs - hopefully the firmware up date will take care of the illegal disc error.
     
    Last edited: Apr 8, 2006
  12. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    31,683
    Likes Received:
    1
    Trophy Points:
    96
    @BoxOfEyes -

    binkie7 beat me to it, bless her; i must be getting slow :)

    - not too bad, latest 6.x version is 6.6.0.18 (a lot of us don't count 6.6.1.4 as that's crap and buggy)

    - i'm assuming your PC is a Dell and the burner came with it, if so your firmware is a little out of date, 203D is here - http://tdb.rpc1.org/#ND6500A
    If it's not a Dell PC then see the other choices at that link..

    - sufficient total memory but freee memory leaves much to be desired. you need to ensure sufficient free memory prior to ALL burning

    - firmware is recognising those discs ok so firmware update can maybe keep for another time

    - see all other comments

    - too slow, try 4x or even 8x

    - CDRALW2K.SYS is part of Roxio. try uninstalling Roxio (doesn't always play well with Nero), then you might need to fully remove using Roxio Zapper - http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml
     
  13. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    @creaky
    Nah your not getting slow!! Always good to have a 2nd set of eyes look thru the logs imho.
     
  14. corleno

    corleno Member

    Joined:
    Apr 9, 2006
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    hy
    im having an issue with my nero
    I wasred like 40 DVDs because of this error while burning DATA dvds :((
    plz help
    my detailed log

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
    Nero version: 6.3.1.26 (Nero Express)
    Recorder: <HP DVD Writer 635d> Version: JPS3 - HA 3 TA 0 - 6.3.1.26
    Adapter driver: <atapi> HA 3
    Drive buffer : 2048kB
    Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
    Connected to MMC as unknown drive with class-nr : 1
    Drive is autodetected - recorder class: Std. MMC recorder
    CD-ROM: <HP DVD Writer 635d >Version: JPS3 - HA 3 TA 0 - 6.3.1.26
    Adapter driver: <atapi> HA 3

    === Scsi-Device-Map ===
    DiskPeripheral : ST3120213A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : HP DVD Writer 635d atapi Port 3 ID 0 DMA: On
    CdRomPeripheral : SAMSUNG CDRW/DVD SM-352N atapi Port 3 ID 1 DMA: On

    === CDRom-Device-Map ===
    HP DVD Writer 635d K: CDRom0
    SAMSUNG CDRW/DVD SM-352N L: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1022MB (1047276kB)
    Free physical memory: 431MB (442128kB)
    Memory in use : 57 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    9.4.2006
    ISO compilation
    6:24:49 PM #1 Text 0 File Isodoc.cpp, Line 6083
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    6:24:49 PM #2 Text 0 File Reader.cpp, Line 126
    Reader running

    6:24:49 PM #3 Text 0 File Writer.cpp, Line 124
    Writer HP DVD Writer 635d running

    6:24:49 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    6:24:49 PM #5 Text 0 File Burncd.cpp, Line 3152
    Turn on Disc-at-once, using DVD media

    6:24:50 PM #6 Text 0 File DlgWaitCD.cpp, Line 247
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 1542655 (342:48.55, 3012MB)

    6:24:50 PM #7 Text 0 File DlgWaitCD.cpp, Line 259
    Write in overburning mode: NO (enabled: CD)

    6:24:50 PM #8 Text 0 File DlgWaitCD.cpp, Line 2162
    Recorder: HP DVD Writer 635d, Media type: DVD-R
    Disc Manufacturer: FUJIFI - LM03
    Disc Application Code: 64, Disc Physical Code: 193

    6:24:50 PM #9 Text 0 File DlgWaitCD.cpp, Line 420
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    6:24:50 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 1542656 (1542656) = #1542656/342:48.56
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1542656 blocks [HP DVD Writer 635d ]
    --------------------------------------------------------------

    6:24:50 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [HP DVD Writer 635d ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3159359488, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    1542656 | lead-out | 1 | 0x00 | 0x41

    6:24:50 PM #12 Phase 24 File dlgbrnst.cpp, Line 1855
    Caching of files started

    6:24:50 PM #13 Text 0 File Burncd.cpp, Line 4163
    Cache writing successful.

    6:24:50 PM #14 Phase 25 File dlgbrnst.cpp, Line 1855
    Caching of files completed

    6:24:50 PM #15 Phase 36 File dlgbrnst.cpp, Line 1855
    Burn process started at 8x (11,080 KB/s)

    6:24:51 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    6:24:51 PM #17 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 4:53,438 (293438ms) -> OK

    6:24:51 PM #18 Text 0 File DVDR.cpp, Line 2011
    Recording mode: Sequential Recording Mode

    6:24:51 PM #19 Text 0 File Mmc.cpp, Line 20794
    Set BUFE: supported -> ON , Generic write control : ON

    6:24:51 PM #20 Text 0 File DVDR.cpp, Line 2152
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    6:24:51 PM #21 Text 0 File Cdrdrv.cpp, Line 8228
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    6:26:01 PM #22 Text 0 File Cdrdrv.cpp, Line 1297
    18:26:01.515 - HP DVD Writer 635d\H3 T0 : Queue again later

    6:33:37 PM #23 SCSI -1135 File Cdrdrv.cpp, Line 1445
    SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x0ADC0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x10 0x5E 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x0C 0x00

    6:33:37 PM #24 CDR -1135 File Writer.cpp, Line 304
    Write error

    6:33:37 PM #25 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    6:33:37 PM #26 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    6:33:38 PM #27 Text 0 File DVDR.cpp, Line 2394
    EndDAO: Last written address was 1072639

    6:33:38 PM #28 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    6:33:38 PM #29 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    6:33:38 PM #30 Phase 38 File dlgbrnst.cpp, Line 1855
    Burn process failed at 8x (11,080 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 11/17/2005 9:49:28 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2149 (xpsp_sp2_rc2.040610-1520), size=95360 bytes, created 6/10/2004 4:18:12 PM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
  15. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    @corleno
    Welcome to aD!
    You may need a firmware up date but I'm having a heck of a time finding your drive. The oem may be Liteon. From what I could find looks like this drive should have come with software that you need to install to check for firmware updates. Maybe Creaky or Maxburn can find one.
    Okay media at best. Try some Verbatim or made in Japan only Fuji, Sony or Maxell.
    Take it down a notch or 2 to 4x.

    A Nero update can hurt - see above posts for a decent version of 6.
     
  16. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    31,683
    Likes Received:
    1
    Trophy Points:
    96
    hi, it would seem to be an OEM of the Lite-on SOHW-1673S however i can't find much on firmware details either...
     
  17. corleno

    corleno Member

    Joined:
    Apr 9, 2006
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    hy thank u guys for
    your prompt replies

    Im having a HP dvd635d
    and i hav J3 i think the latest is J(somethin) 5

    thing is ,i lost the HP writer CD :(
    and i am unable to update the software,iv tried Google and everything
    if some1 can give me the
    data on the HP cd it would be great
    i think a firmware upgrade will work , but
    iv no hp cd

    thank you again,
    corleno
     
  18. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
  19. andyp95

    andyp95 Member

    Joined:
    Mar 27, 2006
    Messages:
    33
    Likes Received:
    0
    Trophy Points:
    16
    Binkie, Max
    I've successfully installed my dvd burner. Thank you so much for all the help within the last 2 weeks. It's not as complicated as I thought it would be. Luckily, it came w/the latest firmware so I don't have to do any updates. THANK YOU!! You guys are the greatest. From now on I don't have to worry about replacing burner again.
     
  20. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    18,496
    Likes Received:
    0
    Trophy Points:
    116
    @andyp95
    Glad to hear you were successful!!! See if I can do it anyone can!
    Hopefully your burn problems have been solved!
     

Share This Page