1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Nero Error - illegal disk - Please Help

Discussion in 'Nero discussion' started by raduly, Jul 5, 2005.

  1. LOCOENG

    LOCOENG Moderator Staff Member

    Joined:
    Feb 4, 2005
    Messages:
    11,493
    Likes Received:
    2
    Trophy Points:
    118
    @hitmang17

    I don't see a whole lot wrong with your log...can't find firmware, Nero is current, media is excellent. My only thought would be that the TY discs are not compatable with your drive, I find this unlikely because TY is some of the best in the world, but I would try another brand and see if you have any luck.
     
  2. hitmang17

    hitmang17 Member

    Joined:
    Mar 24, 2006
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    I have tried Pengo, Imation, Maxell (which I was able to get my one and only successful burn with, but no more) and Sony. I'm pretty lost here.
     
  3. LOCOENG

    LOCOENG Moderator Staff Member

    Joined:
    Feb 4, 2005
    Messages:
    11,493
    Likes Received:
    2
    Trophy Points:
    118
    @hitmang

    All of these discs can be dodgy especially if made in Taiwan, you need to stick with media made in Japan even with the Maxell's and Sony's. The Pengo's, Imation's and especially Memorex are ones to avoid like the plague.

    Those are the Sony's in your log right? Are they newer discs like say above 8X rated speed? You might want to try either finding media that is lower in speed or higher in speed than the rating on the ones you have. I'm at a loss on this one, maybe creaky will pop back in.
     
  4. hitmang17

    hitmang17 Member

    Joined:
    Mar 24, 2006
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    Both the Maxells and Sonys (in the log) were Japan-made and the standard 8x speed.
     
  5. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    31,683
    Likes Received:
    1
    Trophy Points:
    96
    hi, just read LOCOENG's last reply there...so i will see if i can add anything new; not sure if i can though :)

    can't see anything amiss in the logfile; i think the burner is an 'OEM' burner ie supplied with your PC going by the 'GA03' version of your firmware, and as far as i can see the firmware is up to date..

    anyway, we talked about Pengo a bit here - http://forums.afterdawn.com/thread_view.cfm/1/193259 and as for Imation, they use varying quality in disc manufacturers and you can't guarantee which manufacturers' discs you'll get just by looking at the disc tub..

     
  6. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    31,683
    Likes Received:
    1
    Trophy Points:
    96
    @hitmang17 - any progress, good or bad yet, i'd like to close this thread soon...it's getting too unwieldy

    edit- spelling corrected :)
     
    Last edited: Apr 9, 2006
  7. LOCOENG

    LOCOENG Moderator Staff Member

    Joined:
    Feb 4, 2005
    Messages:
    11,493
    Likes Received:
    2
    Trophy Points:
    118
    unweildy?

    Did you have to break out the thesaurus on that one creaky?
     
  8. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    31,683
    Likes Received:
    1
    Trophy Points:
    96
    oops well spotted. corrected :)
     
  9. LOCOENG

    LOCOENG Moderator Staff Member

    Joined:
    Feb 4, 2005
    Messages:
    11,493
    Likes Received:
    2
    Trophy Points:
    118
    LOL...remember i before e except after c.
     
  10. arniebear

    arniebear Active member

    Joined:
    Jan 2, 2005
    Messages:
    8,638
    Likes Received:
    0
    Trophy Points:
    96
    except in the case of neighbor and weigh :)
     
  11. djmystery

    djmystery Member

    Joined:
    Apr 11, 2006
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    Hey Gurus, I seem to have run into the same "Illegal Disc" problem. I was working with the Memorex DVD-Rs (which I now know are crap) but they burnt just fine. Now I've switched to Sony DVD-Rs(1x-16x) (Made in Japan) and they don't seem to burn at all. The Maximum burn speed shown is 2.4x and then I get hit with the "Illegal Disc" problem.

    I own a NEC ND-6500A DVD+-RW drive (MAX Burn Speed 8x) that shipped with my Dell Laptop.

    Firmware: 2.03D
    Nero Version: 6.6.0.6

    Could you guys please help me out?

    Here's a copy of my logfile from Nero:

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 4:21:30 PM
    Nero Version: 6.6.0.6
    Recorder: <_NEC DVD+-RW ND-6500A> Version: 203D - HA 1 TA 0 - 6.6.0.6
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <_NEC DVD+-RW ND-6500A>Version: 203D - HA 1 TA 0 - 6.6.0.6
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : Hitachi HTS541080G9AT00 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : _NEC DVD+-RW ND-6500A atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    _NEC DVD+-RW ND-6500A D: CDRom0
    Generic DVD-ROM F: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1006MB (1030576kB)
    Free physical memory: 587MB (602000kB)
    Memory in use : 41 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    11.4.2006
    ISO compilation
    5:58:38 PM #1 Text 0 File Isodoc.cpp, Line 6168
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    5:58:38 PM #2 Text 0 File Reader.cpp, Line 127
    Reader running

    5:58:38 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)

    5:58:38 PM #4 Text 0 File Burncd.cpp, Line 3155
    Turn on Disc-at-once, using DVD media

    5:58:39 PM #5 Text 0 File DlgWaitCD.cpp, Line 257
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2230127 (495:35.02, 4355MB)

    5:58:39 PM #6 Text 0 File DlgWaitCD.cpp, Line 269
    Write in overburning mode: NO (enabled: CD)

    5:58:39 PM #7 Text 0 File DlgWaitCD.cpp, Line 2311
    Recorder: _NEC DVD+-RW ND-6500A, Media type: DVD-R
    Disc Manufacturer: SONY16 - D1
    Disc Application Code: 64, Disc Physical Code: 193

    5:58:39 PM #8 Text 0 File DlgWaitCD.cpp, Line 431
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    5:58:39 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 829
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2230128 (2230128) = #2230128/495:35.3
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2230128 blocks [_NEC DVD+-RW ND-6500A]
    --------------------------------------------------------------

    5:58:39 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1042
    Prepare recorder [_NEC DVD+-RW ND-6500A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4567302144, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2230128 | lead-out | 1 | 0x41 | 0x00

    5:58:39 PM #11 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    5:58:40 PM #12 Text 0 File Burncd.cpp, Line 4042
    Cache writing successful.

    5:58:40 PM #13 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    5:58:40 PM #14 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 2.4x (3,324 KB/s)

    5:58:40 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2604
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    5:58:40 PM #16 Text 0 File DVDR.cpp, Line 2300
    Recording mode: Sequential Recording Mode

    5:58:40 PM #17 Text 0 File Mmc.cpp, Line 21079
    Set BUFE: JustLink -> ON

    5:58:40 PM #18 Text 0 File DVDR.cpp, Line 2441
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    5:58:40 PM #19 Text 0 File Cdrdrv.cpp, Line 8332
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    5:58:40 PM #20 SCSI -1046 File Cdrdrv.cpp, Line 1178
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0x07 0x70 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    5:58:40 PM #21 CDR -1046 File ThreadedTransferInterface.cpp, Line 1764
    Illegal disc
    _NEC DVD+-RW ND-6500A\H1 T0

    5:58:40 PM #22 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1764
    Could not perform start of Disc-at-once

    5:58:40 PM #23 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 2.4x (3,324 KB/s)


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
    File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 5/31/2005 5:36:01 PM (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

     
  12. LOCOENG

    LOCOENG Moderator Staff Member

    Joined:
    Feb 4, 2005
    Messages:
    11,493
    Likes Received:
    2
    Trophy Points:
    118
    Lets start with an upgrade of Nero to 6.6.0.18:

    http://httpdl2.usw.nero.com/Nero-6.6.0.18.exe

    Two drives in the laptop...fancy. Anywho, let get the dma on for this one while we are here (shouldn't have anything to do with your error).

    http://forums.afterdawn.com/thread_view.cfm/260038

    And, maybe turn off the high compatability mode with the DVD-R's.

    Good luck and happy burning.
     
    Last edited: Apr 11, 2006
  13. oldscho0l

    oldscho0l Member

    Joined:
    Apr 11, 2006
    Messages:
    7
    Likes Received:
    0
    Trophy Points:
    11
    Hey guys, first post, but ive randomly lurked here for other problems ive had :)
    Another Illegal Disc error to add to this heap, perhaps someone can help me sort it out. This only started to happen recently, and its happened with 2 seperate brands of dvd-r's. the frist batch were some maxell dvd-r's that i thought just was a bad batch, so i bought some fujifilm's and am having the same prob.

    Logfile:

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/14/2002 3:03:36 PM
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

    NT-SPTI used
    Nero Version: 6.6.1.4
    Internal Version: 6, 6, 1, 4d

    Recorder: <SONY DVD RW DW-D22A> Version: BYS2 - HA 1 TA 1 - 6.6.1.4
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <LG CD-RW CED-8080B >Version: 1.06 - HA 1 TA 0 - 6.6.1.4
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST320011A atapi Port 0 ID 0 DMA: On
    DiskPeripheral : Maxtor 4D040H2 atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : LG CD-RW CED-8080B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : SONY DVD RW DW-D22A atapi Port 1 ID 1 DMA: On
    CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    LG CD-RW CED-8080B D: CDRom0
    SONY DVD RW DW-D22A E: CDRom1
    AXV CD/DVD-ROM G: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1023MB (1047792kB)
    Free physical memory: 556MB (570152kB)
    Memory in use : 45 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    11.4.2006
    ISO compilation
    9:26:58 PM #1 Text 0 File Isodoc.cpp, Line 6475
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    9:26:58 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531
    ReadBuffer-Pipe got 81920KB of Memory

    9:26:58 PM #3 Text 0 File Reader.cpp, Line 124
    Reader running

    9:26:58 PM #4 Text 0 File Writer.cpp, Line 122
    Writer SONY DVD RW DW-D22A running

    9:26:58 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    9:26:58 PM #6 Text 0 File Burncd.cpp, Line 3305
    Turn on Disc-At-Once, using DVD media

    9:26:58 PM #7 Text 0 File DlgWaitCD.cpp, Line 281
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2216383 (492:31.58, 4328MB)

    9:26:58 PM #8 Text 0 File DlgWaitCD.cpp, Line 293
    Write in overburning mode: NO (enabled: CD DVD)

    9:26:58 PM #9 Text 0 File DlgWaitCD.cpp, Line 2612
    Recorder: SONY DVD RW DW-D22A, Media type: DVD-R
    Disc Manufacturer: Prodis - cF02
    Disc Application Code: 64, Disc Physical Code: 193

    9:26:58 PM #10 Text 0 File DlgWaitCD.cpp, Line 459
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    9:26:58 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2216384 (2216384) = #2216384/492:31.59
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2216384 blocks [SONY DVD RW DW-D22A]
    --------------------------------------------------------------

    9:26:58 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [SONY DVD RW DW-D22A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4539154432, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2216384 | lead-out | 1 | 0x41 | 0x00

    9:26:58 PM #13 Text 0 File SCSIPassThrough.cpp, Line 38
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    9:26:58 PM #14 Text 0 File SCSIPassThrough.cpp, Line 83
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    9:26:58 PM #15 Phase 24 File dlgbrnst.cpp, Line 1685
    Caching of files started

    9:26:58 PM #16 Text 0 File Burncd.cpp, Line 4145
    Cache writing successful.

    9:26:58 PM #17 Phase 25 File dlgbrnst.cpp, Line 1685
    Caching of files completed

    9:26:58 PM #18 Phase 36 File dlgbrnst.cpp, Line 1685
    Burn process started at 4x (5,540 KB/s)

    9:26:58 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    9:26:58 PM #20 Text 0 File DVDR.cpp, Line 2707
    Recording mode: Sequential Recording Mode

    9:26:58 PM #21 Text 0 File DVDR.cpp, Line 2863
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    9:26:58 PM #22 Text 0 File Cdrdrv.cpp, Line 8647
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    9:27:01 PM #23 SPTI -1046 File SCSIPassThrough.cpp, Line 289
    E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
    Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 30 05
    Buffer x03110000: Len x10000
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

    9:27:01 PM #24 CDR -1046 File Writer.cpp, Line 311
    Illegal disc
    E: SONY DVD RW DW-D22A

    9:27:01 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    9:27:01 PM #26 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    9:27:01 PM #27 Text 0 File DVDR.cpp, Line 3103
    EndDAO: Last written address was -1

    9:27:01 PM #28 Phase 38 File dlgbrnst.cpp, Line 1685
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 3:03:36 PM
    File 'Drivers\PXHELP20.SYS': Ver=2.02.39a, size=16288 bytes, created 9/25/2002 2:02:00 AM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
  14. djmystery

    djmystery Member

    Joined:
    Apr 11, 2006
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    Alright I upgraded to v6.6.0.18 but am still running into the same problem.

    I don't have a 2nd drive, the 2nd drive is a virtual drive to mount isos, bins/cues etc. Sorry should've mentioned that, although like you said, it should have nothing to do with my error.

    How do I do that? I looked through Nero's Options and wasn't able to find any option to change the DVD compatibility mode.

    Thanks for your all your help so far.
     
  15. LOCOENG

    LOCOENG Moderator Staff Member

    Joined:
    Feb 4, 2005
    Messages:
    11,493
    Likes Received:
    2
    Trophy Points:
    118
    @oldscho0l

    Welcome to AD.

    Current firmware for your drive is BYS3, it hasn't been updated since feb of 2004 which makes it kinda old. Firmware can be found here:

    http://dhc014.rpc1.org/indexOEM.htm

    But according to this your drive is actually a Lite-On and can be crossflashed to use Lite-On firmware, which might be a little more current. Crossflashing is risky and can fry your drive if not done correctly...if you are interested, here is some more info: http://www.videohelp.com/dvdwriters.php?DVDnameid=741&Search=Search&list=

    Your Nero version is also a bit quirky, I would suggest using the clean tool to remove your current version and downgrade to version 6.6.0.18. Make sure to save your serial key in a safe place for reinstallation before removing Nero or any other software.

    Cleantool: http://ww2.nero.com/nero6/eng/Nero_6_CleanTool.html
    6.6.0.18: http://httpdl2.usw.nero.com/Nero-6.6.0.18.exe


    This shouldn't have anything to do with your burning problem, but it is a good idea to go ahead and take care of it now. DMA should be on for all drives, enable via this guide: http://forums.afterdawn.com/thread_view.cfm/260038

    Everything else seems to be in order, nothing terribly wrong with the rest of your log, but the prodisc Sony's may be a little dodgy...maybe try some verbatims(made in taiwan) or Sony, Fuji, Maxell, Taiyo Yuden (made in Japan).
     
    Last edited: Apr 12, 2006
  16. LOCOENG

    LOCOENG Moderator Staff Member

    Joined:
    Feb 4, 2005
    Messages:
    11,493
    Likes Received:
    2
    Trophy Points:
    118
    @djmystery

    The option, if using Recode, will be in the second screen under more options. If using Nero Burning Rom, select your drive from the top tool bar, highlight your drive and the feature should be in the options at the bottom.
     
  17. djmystery

    djmystery Member

    Joined:
    Apr 11, 2006
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    [bold]Thanks for the step-by-step instructions...

    Did that and still no luck! :(

    Here's my new log should you wish to take a look at it:

    [/bold]
    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes,

    created 10/26/2004 5:35:34 PM
    Nero Version: 6.6.0.18
    Internal Version: 6, 6, 0, 18e

    Recorder: <_NEC DVD+-RW ND-6500A> Version: 203D - HA 1 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <_NEC DVD+-RW ND-6500A>Version: 203D - HA 1 TA 0 - 6.6.0.18
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : Hitachi HTS541080G9AT00 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : _NEC DVD+-RW ND-6500A atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    _NEC DVD+-RW ND-6500A D: CDRom0
    Generic DVD-ROM F: CDRom1
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1006MB (1030576kB)
    Free physical memory: 545MB (558884kB)
    Memory in use : 45 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    12.4.2006
    ISO compilation
    10:11:24 AM #1 Text 0 File Isodoc.cpp, Line 6359
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    10:11:24 AM #2 Text 0 File Reader.cpp, Line 127
    Reader running

    10:11:24 AM #3 ISO9660GEN -11 File geniso.cpp, Line 3309
    First writeable address = 0 (0x00000000)

    10:11:24 AM #4 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    10:11:25 AM #5 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2180559 (484:34.09, 4258MB)

    10:11:25 AM #6 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    10:11:25 AM #7 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: _NEC DVD+-RW ND-6500A, Media type: DVD-R
    Disc Manufacturer: SONY16 - D1
    Disc Application Code: 64, Disc Physical Code: 193

    10:11:25 AM #8 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    10:11:25 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2180560 (2180560) = #2180560/484:34.10
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2180560 blocks

    [_NEC DVD+-RW ND-6500A]
    --------------------------------------------------------------

    10:11:25 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [_NEC DVD+-RW ND-6500A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4465786880, ISRC

    ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2180560 | lead-out | 1 | 0x41 | 0x00

    10:11:26 AM #11 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    10:11:26 AM #12 Text 0 File Burncd.cpp, Line 4122
    Cache writing successful.

    10:11:26 AM #13 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    10:11:26 AM #14 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 2.4x (3,324 KB/s)

    10:11:26 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0):

    write at #0

    10:11:27 AM #16 Text 0 File DVDR.cpp, Line 2571

    Recording mode: Sequential Recording Mode for Multisession

    10:11:27 AM #17 Text 0 File Mmc.cpp, Line 21774
    Set BUFE: JustLink -> ON

    10:11:27 AM #18 Text 0 File DVDR.cpp, Line 2726
    Start write address at LBA 0
    DVD high compatibility mode: No

    10:11:27 AM #19 Text 0 File Cdrdrv.cpp, Line 8892
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 2FE10 h
    Start sector number of the next Border-In: 2FFA0 h
    Media Specific [16..63]:
    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
    00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    10:11:27 AM #20 SCSI -1046 File Cdrdrv.cpp, Line 1182
    SCSI Exec, HA 1, TA 0, LUN 0
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x30
    Sense Qual: 0x05
    CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x21 0x45 0xD0 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x30 0x05

    10:11:27 AM #21 CDR -1046 File ThreadedTransferInterface.cpp, Line 1778
    Illegal disc

    10:11:27 AM #22 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1778
    Could not perform start of Disc-at-once

    10:11:27 AM #23 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 2.4x (3,324 KB/s)


    Existing drivers:
    File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes,

    created 8/17/2001 2:07:32 PM
    File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 5/31/2005 5:36:01 PM

    (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes,

    created 8/3/2004 10:59:44 PM (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
     
    Last edited: Apr 12, 2006
  18. LOCOENG

    LOCOENG Moderator Staff Member

    Joined:
    Feb 4, 2005
    Messages:
    11,493
    Likes Received:
    2
    Trophy Points:
    118
    Are the files being backed up coming off your virtual drive by any chance? Try from your regular HDD if so.
     
  19. djmystery

    djmystery Member

    Joined:
    Apr 11, 2006
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    11
    Have to say, you guys have excellent turnaround time for responses. It's amazing!

    Anyhow, no, the data is coming off my HDD.
     
  20. LOCOENG

    LOCOENG Moderator Staff Member

    Joined:
    Feb 4, 2005
    Messages:
    11,493
    Likes Received:
    2
    Trophy Points:
    118
    My only other suggestion to you dj is to try another brand of disc...Verbatims are excellent. Fuji, Maxell, Taiyo Yuden if made in Japan are also highly recommended.

    As for the response time, I am at work and luckily have some time to spare...

    I'm baffled on this one...
     

Share This Page