1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Nero Unable to Complete Burn Process

Discussion in 'Nero discussion' started by eric_kws, Mar 1, 2007.

  1. eric_kws

    eric_kws Member

    Mar 1, 2007
    Likes Received:
    Trophy Points:
    hi, i'm currently using nero 7 ultra edition. i've been having this problem just recently, i couldnt complete the burning process, something about not being to create a high definition border (or something like that). will include the history for your reference.
    please please help, i've wasted around 10 new dvds.

  2. eric_kws

    eric_kws Member

    Mar 1, 2007
    Likes Received:
    Trophy Points:
    ok, here goes:

    10=Sectors from %d to %d on disc are different to source
    11=Sector %d on disc has different content to source
    20=Read errors from sector %d to %d
    21=Read error at sector %d
    30=Audio data readable but not comparable

    100=Audio-verify runs with read/write-offset of %d samples

    0=No Error
    -1=File cannot be read
    -2=Read error in audio file
    -3=Write error in audio file
    -4=File cannot be closed
    -5=Out of memory
    -6=Internal error
    -7=Internal illegal parameter

    0=No error
    -2=DRM checking failed. Not enough burn licenses available.

    0=No error
    1=Files are different
    2=CD File is missing
    3=Hard drive file is missing
    4=Disc file is inaccessible
    5=Hard drive file is inaccessible
    6=Read error on CD file
    7=Read error on hard drive file
    8=Directory missing on CD
    9=Directory missing on hard drive
    10=Cannot mount the written CD
    11=Drive letter of the recorder is unknown!
    12=Unknown verify error
    13=Status summary
    14=Out of memory
    15=I/O error while reading the file system structure
    16=Error caused by corrupt filesystem structure
    17=Error caused by supplying wrong parameters to the fs
    18=Too many locks of the filesystem buffers
    19=Cannot find the corresponding file system on the destination disc
    20=Read error on hard drive sector
    21=Backup file content differs from the hard drive data
    22=Backup file contains incorrect hard drive information

    0=No Error
    1=File is probably infected by a virus
    2=File could not be cured
    3=File was cured successfully
    4=An unknown error occurred during the virus scan
    5=Out of memory error during the virus scan
    6=A read error occurred during the virus scan
    7=File might be infected by an unknown virus

    -1=Out of memory
    -2=Cannot open wave file!
    -3=Unexpected file format!
    -4=Read error in wave file!
    -5=Only PCM wave files are supported!
    -6=Unsupported wave sample format!
    -7=Internal error: Init is missing!
    -8=Internal error!

    -100=Video MPEG encoder not available
    -101=Invalid Video MPEG encoder DLL
    -102=This version of the Video MPEG encoder DLL is not compatible
    -103=Cannot create a temporary file name
    -104=MPEG2 plug-in not installed
    -105=Unknown error in the Video MPEG encoder
    1=Not enough memory
    2=Not enough encoding parameters given to the encoder
    3=Unable to open the file
    4=Encoding interrupted by the user
    5=Cannot start video encoder
    6=The parameters were not accepted by the encoder
    7=Invalid video format
    8=Error creating video format
    9=Cannot open output file
    10=Error during encoding
    11=Decoder not ready
    12=Cannot get bitmap
    13=Disk full
    14=Error retrieving information
    15=The encoder cannot produce this output format
    16=Unsupported file format

    -1=Unspecified internal error
    -2=Buffer too small to hold all the information
    -3=Failed to create a unique temporary file name
    -4=Not enough memory to complete current action
    -5=Violation against DVD specification detected
    -6=Invalid parameter
    -7=Too many video title sets
    -8=A file item requires a pathname
    -10=File access denied
    -11=Invalid file handle
    -12=Share violation
    -13=Too many open files
    -14=File '%s' not found
    -15=Disk full
    -16=Hardware I/O error
    -17=Generic/unknown I/O error
    -18=Seek beyond the file
    -19=File size is not a multiple of a logical block size (2 KB)
    -20=File is not a DVD file format
    -21=Required file '%s' is not present
    -22=File '%s' is not referenced and should not be present
    -23=Video title set containing '%s' is not required
    -24=One or more files (mostly VOB file(s)) do not belong to the corresponding IFO file
    1=Cannot load library
    2=Invalid library
    3=Cannot read compilation
    4=VIDEO_TS directory not found
    5=Backup file '%s' should be identical to '%s'

    -1=Read error on SCSI device!
    -2=Out of memory!
    -3=Seek error on SCSI device!
    -4=Illegal call (internal error)!

    -1=Read error on SCSI device!
    -2=Out of memory!
    -3=Illegal call (internal error)!

    -1=Error writing multisession info file!
    -2=Error inserting multisession info file into compilation!
    -3=Error recreating multisession CD stamp!
    -4=Fatal error while trying to read HFS data from SCSI hard drive!
    -5=Fatal error while trying to read boot image data! No disc in the drive?
    -6=Error while creating ISO or Joliet file names!

    -1=Illegal logical drive specified!
    -2=Cannot access vwin32.dll!
    -3=Drive locking failed!
    -4=Seek within logical drive failed!
    -5=Open/Close mismatch!
    -6=Read error!
    -7=Cannot get drive information!
    -8=Cannot write on a logical device!

    1=Aborted by user
    2=Error opening file
    3=Error closing file
    4=Error reading file
    5=Error reading cache file
    6=File error
    -1=General Error
    -2=Error: function not implemented
    -3=Error: no user interface
    -4=Error: phase error
    -5=Error: not enough memory
    -6=Error writing file
    -7=Error opening cache file
    -8=Error writing cache file
    -9=Error: no driver
    -10=Wrong Version
    -11=Error accessing cache file
    -12=Capability cannot be changed
    -13=Error reading cache file
    -14=Error writing cache file
    -15=Cache file too small - not all files could be cached
    -16=Could not perform StartTrack
    -17=Could not perform ReadBuffer
    -18=Could not perform EndTrack
    -19=Could not perform Fixation
    -20=Could not perform Write
    -21=Error reading Audio
    -22=Cannot cache with Audio CD
    -23=Currently, ISO images may only be written on empty CDs!
    -24=Could not perform end of Disc-at-once
    -25=Error reading data
    -26=Recorder does not support Disc-at-once
    -27=Could not perform start of Disc-at-once
    -28=Could not generate CD TEXT information
    -30=Cannot write track at correct position with this recorder
    -31=Cannot write compilation in Disc-at-once with this recorder
    -32=Cannot write compilation in Track-at-once with this recorder
    -33=Error building internal Disc-at-once structures
    -34=Cannot write compilation to selected recorders simultaneously
    -35=Invalid track info
    -36=Could not perform StartDisk
    -37=Could not perform StartSession
    -38=Could not perform start of Track-at-once
    -39=Could not perform EndSession
    -40=Could not perform EndDisk

    -1=Not enough memory
    -2=Read error in image file
    -3=Image file has illegal format
    -4=Illegal function/method call
    -5=Error building internal Disc-at-once structures
    -6=Unknown internal error
    -7=Error building internal Track-at-once structures

    -1 =Unspecified Recorder Error
    -2 =Bad DLL version
    -3 =Recorder function not implemented
    -4 =Recorder function not supported
    -14 =Capability read only
    -15 =Capability unknown
    -20 =Queuing failed
    -21 =Wait queue failed
    -22 =Abort queue failed
    -23 =Out of memory
    -25 =Queue again later
    -26 =SCSI/ATAPI command timeout error
    -31 =Buffer too large
    -100 =Parameter error
    -101 =Invalid track info
    -102 =Invalid fixinfo
    -103 =Invalid track mode
    -104 =Invalid pause length
    -200 =Internal state error
    -201 =Invalid write state
    -300 =Unspecified host adapter error
    -400 =Unspecified target error
    -500 =SCSI command aborted
    -599 =Undefined SCSI error
    -600 =Device not available
    -601 =Specified host adapter invalid
    -999 =No SCSI/IDE command
    -1000=SCSI/IDE error
    -1001=Absorption control error
    -1002=Application code conflict
    -1003=ATIP time miscompare
    -1004=Attempt to cross track boundary
    -1005=Audio play aborted
    -1006=Audio play stopped due to error
    -1007=Barcode reading error
    -1008=Block size conflict
    -1009=Block size format conflict
    -1010=Buffer data size error
    -1011=Buffer error during recording
    -1012=Buffer overflow
    -1013=Buffer underrun
    -1014=Calibration area almost full
    -1015=Calibration area full
    -1016=Cannot read ATIP
    -1017=Cannot recover from lead-in
    -1018=Cannot recover from lead-out
    -1019=Cannot recover from PMA
    -1020=Cannot recover from callibration area
    -1021=Cannot recover from track
    -1022=Command currently not valid
    -1023=Command sequence error
    -1024=Communication failure
    -1025=Current command aborted
    -1026=Current program area empty
    -1027=Damaged track present
    -1028=Damaged track detected
    -1029=Data track length error
    -1030=Diagnostic failure
    -1031=Disc is write protected
    -1032=Disc style mismatch
    -1033=Drive not ready
    -1034=Dummy blocks added
    -1035=EEPROM failure
    -1036=End of disc reached
    -1037=End of user area of this track
    -1038=Exit packet write area
    -1039=Focus or tracking error
    -1040=Illegal block size for command
    -1041=Illegal cue sheet
    -1042=Illegal cue sheet length
    -1043=Illegal cue sheet parameter
    -1044=Illegal field in command
    -1045=Illegal form for reserved track
    -1046=Illegal disc
    -1047=Illegal mode for this track
    -1048=Illegal packet mode
    -1049=Illegal reserve length
    -1050=Illegal reserve packet length
    -1051=Illegal track
    -1052=Illegal track descriptor table
    -1053=Illegal track descriptor unit
    -1054=Illegal track mode
    -1055=Illegal track number
    -1056=Illegal track status
    -1057=Illegal transfer length
    -1058=Inappropriate command
    -1059=Initiator detected error message received
    -1060=Internal controller error
    -1061=Internal target failure
    -1062=Invalid audio address
    -1063=Invalid bits in identify message
    -1064=Invalid block address
    -1065=Invalid command
    -1066=Invalid field in command
    -1067=Invalid field in parameter
    -1068=Invalid LUN
    -1069=Invalid message error
    -1070=Invalid start address
    -1071=Laser current over
    -1072=Laser adjustment error
    -1073=Link area encountered
    -1074=Link blocks encountered
    -1075=Logical unit is reserved
    -1076=Disc changed
    -1077=Disc format corrupted
    -1078=Disc load mechanism failed
    -1079=Disc load or eject failure
    -1080=Disc not present
    -1081=Disc removal prevented
    -1082=Message error
    -1083=Mode parameters changed
    -1084=Monitor ATIP error
    -1085=Nonexistent block encountered
    -1086=Not enough space
    -1087=Not ready to ready transition
    -1088=No additional sense information
    -1089=No barcode available
    -1090=No EFM at search address
    -1091=No packet
    -1092=No pregap
    -1093=No seek complete
    -1094=No TOC
    -1095=No track for finalize
    -1096=Disc should be removed
    -1097=Overlapped command attempted
    -1098=Packet size mismatch
    -1099=Parameter list length error
    -1100=Parameter list too long
    -1101=Parity error
    -1102=PCA area full
    -1103=PMA area full
    -1104=Positioning error
    -1106=Power calibration error
    -1107=Program area not empty
    -1108=Recovered data with ECC
    -1110=Recovered data with retries
    -1111=Recovery needed
    -1112=Request for fixation failed
    -1113=Reserved track present
    -1114=Reset occurred
    -1115=Select or reselect failure
    -1116=Selftest failure
    -1117=Stopped on nondata block
    -1118=Track-at-once not in PMA
    -1119=Track following error
    -1120=Tray out
    -1121=Unable to read TOC, PMA, or subcode
    -1122=Unable to recover TOC
    -1123=Unable to reserve track because track mode has been changed
    -1124=Unknown disc format
    -1125=Unrecordable disc
    -1126=Unrecoverable damaged track has made writable area too small
    -1127=Unrecoverable track descriptor encountered
    -1128=Unrecoverable read error
    -1129=Unwritten area encountered
    -1130=Verify failed
    -1131=Write append error
    -1132=Write busy
    -1133=Write complete
    -1134=Write data error with CU
    -1135=Write error
    -1136=Write illegal block length
    -1137=Write operation in progress
    -1138=Writing lead-in or lead-out in progress
    -1139=Audio play in progress
    -1140=Audio play completed
    -1141=Invalid parameter list length
    -1142=Synchronous data transfer error
    -1143=Blank CD
    -1144=No PMA
    -1145=OPC initialization error
    -1146=OPC execution error
    -1147=OPC ALPC error
    -1148=OPC timeout
    -1149=Read address is ATIP
    -1150=Write address is EFM
    -1151=Write emergency occurred
    -1152=Disc speed error
    -1153=Disc not identified
    -1154=Disc not supported
    -1155=Write emergency
    -1156=Servo error
    -1157=PLL error
    -1158=Address error
    -1159=Header monitor error
    -1160=Header search error
    -1161=EDC error
    -1162=Link/RI/RO error
    -1163=CDBD overrun error
    -1164=Write audio on reserved track
    -1165=Hardware error
    -1166=Invisible track present
    -1167=Incomplete track present (perhaps a CD-RFS-CD?)
    -1168=Unknown track present
    -1169=Logical unit not ready, operation in progress
    -1170=Insufficient time for operation
    -1171=Read timeout
    -1172=Write timeout
    -1173=Read Write Control Task Error
    -1174=Mechanism Control Task Error
    -1175=Internal trace
    -1176=Session fixation error
    -1177=CLV speed invalid
    -1178=Recovered error
    -1179=Disc error
    -1180=Illegal request
    -1181=Unit attention
    -1182=Data protect error
    -1183=Blank check command error
    -1184=Vendor-specific error
    -1185=Copy command aborted
    -1186=Volume overflow error
    -1187=Data miscompare error
    -1188=Disc is not formatted (esp. important for DVD+RW)
    -1189=Cannot read disc - incompatible format
    -1190=DVD problem - no key to read protected DVD
    -1191=Erasing failure
    -1192=Erasing failure - incomplete erase operation detected
    -1193=Disc is writable but not empty
    -1194=PMA update failure
    -1195=Disc not present - tray closed
    -1196=Disc not present - tray open
    -1197=Drive is in use by another application
    -1198=Drive is in use by another application
    -1200=Invalid address for write
    -1201=Drive is in use of InCD
    -1202=Drive is in use of IMAPI
    -1203=Failed to lock IMAPI
    -1205=Burning Layer 1
    -1206=Burning Layer 2
    -1207=Book Type automatically set to: %s
    -1209=Physical disc type
    -1210=Current recorder setting
    -1211=Book Type set to: %s
    -1222=Verification aborted, too much errors
    -1500=DMA-driver error, timeout occured
    -1501=DMA-driver error, parity error
    -1502=DMA-driver error, CRC error
    -1503=Device handle invalid
    -1504=Medium format corrupted
    -1505=Medium format failed
    -1506=Zoned formatting failed due to spare linking
    -1507=POW not possible on currently loaded BD-R disc

    0 =No error
    1 =Aborted by user
    2 =File missing
    3 =File has the wrong format
    -1 =Unspecified Imagegenerator Error
    -2 =Could not perform StartDisk
    -3 =Could not perform StartSession
    -4 =Could not perform StartTrack
    -5 =Could not perform Write
    -6 =Could not perform EndTrack
    -7 =Could not perform EndSession
    -8 =Could not perform EndDisk
    -9 =Error during ISO relocation
    -10 =The image chunks:
    -11 =Error during generation of Disc-at-once information
    -12 =Cannot write track at correct position with this recorder

    -3 =Joliet names of these files (listed here in ISO-L3) are the same:
    -4 =The ISO 9660 Generator ran out of memory
    -5 =The following fixed file has an illegal position
    -6 =Preparation of ISO 9660 structures failed
    -7 =Too many files in one group of interleaved files
    -8 =IO error using the boot image
    -9 =Cannot allocate space on the CD-R
    -10 =Boot sector not recognized

    -3 =The listed files have no unique Joliet name:

    1 =Reading directories
    2 =Creating directories
    5 =Writing files
    6 =Finishing
    9 =Prepare audio writing
    10 =Writing audio
    11 =Writing Audio Track
    12 =Finishing
    13 =Prepare HFS
    14 =Writing HFS
    15 =Writing HFS completed
    16 =Prepare Image
    17 =Writing Image
    18 =Burn Image
    19 =Finishing
    20 =Reading of disc started
    21 =Reading disc completed
    22 =Reading disc failed
    23 =Reading disc aborted
    24 =Caching of files started
    25 =Caching of files completed
    26 =Caching of files failed
    27 =Caching of files aborted
    28 =Speed measurement started
    29 =Speed measurement completed: %s
    30 =Speed measurement failed
    31 =Speed measurement aborted
    32 =Simulation started at %s
    33 =Simulation completed successfully at %s
    34 =Simulation failed at %s
    35 =Simulation aborted
    36 =Burn process started at %s
    37 =Burn process completed successfully at %s
    38 =Burn process failed at %s
    39 =Burn process aborted
    40 =Aborted by user
    41 =Compilation will not fit onto a blank disc
    42 =Writing lead-in
    43 =Writing lead-out
    44 =Writing lead-in and lead-out
    45 =Generation of disc identification started
    46 =Generation of disc identification finished
    47 =Generating relocation information
    48 =Analyzing disc
    49 =Reading track info
    50 =Reading Media Catalog Number
    51 =Reading ISRC
    52 =Finding end of track
    54 =Copying disc
    55 =Completing
    56 =Unspecified Error. The burn process failed!
    57 =Disc-at-once overburning option activated
    59 =Writing hard drive backup track
    60 =Completing
    61 =Simulation started
    62 =Simulation completed successfully
    63 =Simulation failed
    64 =Simulation aborted
    65 =Burn process started
    66 =Burn process completed successfully
    67 =Burn process failed
    68 =Burn process aborted
    69 =Scanning Indexes
    70 =Only the recording of the first session can be Simulated
    71 =Writing several sessions at once. Result may be unreadable on some drives.
    73 =Preparing items
    74 =Checking discs
    76 =Write speed changed due to disc type
    77 =Writing tracks
    78 =Data verification started
    79 =Data verification aborted
    80 =Data verification completed successfully
    81 =Data verification failed
    82 =Encoding video
    83 =Virus scanning started
    84 =Virus scanning completed
    85 =Virus scanning completed. A virus was found and burning must be aborted!!!
    86 =CD TEXT is not supported
    91 =Poor performance by your DMA chipset driver (look for updates)
    92 =Recording quality may be affected by not using JustSpeed option
    93 =Unable to write at this speed. Please select a slower speed and try again.
    98 =Start formatting disc before burning
    99 =Formatting disc before burning
    100 =Formatting disc was successful
    101 =Formatting disc failed
    102 =Fast user switching detected. This may cause buffer underrun.
    105 =Preparing Audio CD-RW (erasing TOC and/or tracks)
    106 =Preparing of Audio CD-RW (erasing TOC and/or tracks) completed
    107 =Audio CD-RW preparations failed
    108 =Audio CD-RW preparations aborted
    109 =Warning: Disabling SMART-BURN function may result in writing errors and impact on the quality of disc recorded.
    110 =Recorder does not support writing in Raw+96 mode on CD-RW.
    111 =DVD-Video files sorted
    112 =DVD-Video files reallocation started
    113 =DVD-Video files reallocation completed
    114 =DVD-Video files reallocation completed (no file modified)
    115 =DVD-Video files reallocation failed
    116 =VariRec disabled - no Audio CD
    117 =DVD-Video files compliance test failed
    118 =SSW (Super Speed Writing) activated
    120 =Creating the image for burning
    121 =Creating Image completed successfully
    122 =Burning the bitmap to the disc started
    123 =Burning the bitmap to the disc completed successfully
    124 =Burning the bitmap to the disc failed
    125 =Burning the bitmap to the disc aborted
    126 =Best write speed for disc detected
    127 =Generating DVD high compatibility borders
    128 =Generating DVD high compatibility borders
    129 =Generating DVD borders completed successfully
    130 =Generating DVD borders aborted
    131 =Recording quality may be affected by not using the PoweRec option
    132 =DVD-Video files compliance ignored
    133 =Writing short lead-out
    134 =Quick Grow last Border
    135 =Quick Add Border
    136 =Quick Format DVD-RW
    137 =Image transfer started
    138 =Image transfer completed successfully
    139 =Image transfer failed
    140 =Image transfer aborted
    141 =Label transfer started
    142 =Label transfer completed successfully
    143 =Label transfer failed
    144 =Label transfer aborted
    145 =Burn process and image transfer started
    146 =Burn process and image transfer completed successfully
    147 =Burn process or image transfer failed
    148 =Burn process and image transfer aborted
    149 =Network transfer completed successfully
    150 =Network transfer failed
    151 =Authentication failed
    152 =Server connection failed
    153 =Server license error
    154 =Recording quality may be affected by not using Auto Pilot option
    156 =Drive is in use by another application
    159 =The simulation has been done at %s speed by PoweRec
    160 =The write has been done at %s speed by PoweRec
    161 =Burn process completed successfully with warnings
    162 =Simulation completed successfully with warnings
    166 =Simulation is not supported for this disc type
    167 =Not able to write Disc-at-once on an open disc.
    168 =Compilation cannot be written on the selected recorder(s)
    169 =DRM checking failed. Not enough burn licenses available.
    170 =Not possible to burn more than 154 sessions to a DVD disc.
    171 =Writing data files started
    172 =Writing data files completed successfully
    173 =Writing data files failed
    174 =Writing data files completed with warnings
    175 =Finalizing disc started
    176 =Finalizing the disc failed
    177 =Disc finalized successfully
    178 =Preparing the disc failed
    179 =Writing file to disc failed
    180 =Copy process failed during reading.
    181 =Writing lead-out...
    182 =Burn Proof activated
    183 =SolidBurn activated
    184 =SolidBurn activated
    185 =Overspeed burning activated

    1 =Aborted by user
    -1 =The CD is copyrighted
    -2 =Making a copy of this CD is not supported
    -3 =Error while writing image file
    -4 =Not enough memory
    -5 =The disc will not fit onto a blank disc
    -6 =Not enough space to copy this disc
    -7 =Not enough space to save this wave file
    -8 =Invalid track info
    -9 =Invalid track mode
    -10 =Warning: Unknown data format at
    -11 =Warning: EDC, ECC Error at
    -12 =Unrecoverable read error at
    -13 =Illegal select for audio track
    -14 =Analyzing CD failed
    -15 =This drive does not support audio extraction
    -20 =Error: wrong item type (1)
    -21 =Error in StartDisk
    -22 =Error in EndDisk
    -23 =Error in StartSession
    -24 =Error in EndSession
    -25 =Error in Write
    -26 =Not enough memory

    -28 =Error building copy item
    -29 =Error: wrong item type (2)
    -30 =Cannot write track at correct position with this recorder
    -31 =Cannot copy this disc to a DVD
    -32 =Can only copy first data track to a DVD
    -33 =This DVD is copy-protected and cannot be read

    1 =Aborted by user
    -1 =Creating image file failed
    -2 =Error in opening image file
    -3 =Error writing image file
    -4 =Error in closing image file
    -5 =The image file is invalid
    -6 =The format of the source disc is not supported
    -7 =This drive does not support audio extraction
    -8 =The copy DLL could not be opened

    0000=No additional sense information
    0006=I/O process terminated
    0011=Audio play in progress
    0017=Cleaning requested
    0200=No seek complete
    0400=Logical unit not ready, cause not reportable
    0401=Logical unit in process of becoming ready
    0402=Logical unit not ready, initialization command required
    0403=Logical unit not ready, manual intervention required
    0404=Logical unit not ready, format in progress
    0407=Logical unit not ready, operation in progress
    0408=Logical unit not ready, long write in progress
    0500=Logical unit does not respond to selection
    0600=No reference position found
    0700=Multiple peripherial devices selected
    0800=Logical unit communication failure
    0801=Logical unit communication timeout
    0802=Logical unit communication parity error
    0803=Logical unit communication CRC error (Ultra-DMA/32)
    0900=Track following error
    0901=Tracking servo failure
    0902=Focus servo failure
    0903=Spindle servo failure
    0904=Head select fault
    0a00=Error log overflow
    0b01=Warning, specified temperaturee exceeded
    0b02=Warning, enclosure degraded
    0c00=Write error
    0c07=Write error, recovery needed
    0c08=Write error, recovery failed
    0c09=Write error, loss of streaming
    0c0a=Write error, padding blocks added
    1000=Invalid block size for command
    1001=Packet does not fit into available space
    1002=Buffer underrun
    1100=Unrecovered read error
    1101=Read retries exhausted
    1102=Error too long to correct
    1105=L-EC uncorrectable error
    1106=CIRC unrecovered error
    110f=Error reading UPC/EAN number
    1110=Error reading ISRC number
    1111=Read error, loss of streaming
    1500=Random positioning error
    1501=Mechanical positioning error
    1502=Positioning error detected by reading disc
    1700=Recovered data with no error correction applied
    1701=Recovered data with retries
    1702=Recovered data with positive head offset
    1703=Recovered data with negative head offset
    1704=Recovered data with retries and/or CIRC applied
    1705=Recovered data using previous sector id
    1707=Recovered data without ECC - recommend reassignment
    1708=Recovered data without ECC - recommend rewrite
    1709=Recovered data without ECC - data rewritten
    1800=Recovered data with error correction applied
    1801=Recovered data with error correction & retries applied
    1802=Recovered data - data auto-reallocated
    1803=Recovered data with CIRC
    1804=Recovered data with L-EC
    1805=Recovered data - recommend reassignment
    1806=Recovered data - recommend rewrite
    1a00=Parameter list length error
    1b00=Synchronous data transfer error
    1d00=Miscompare during verify operation
    2000=Invalid command operation code
    2100=Logical block out of range
    2101=Invalid element address
    2102=Invalid address for write
    2200=Illegal function
    2400=Invalid field in CDB
    2500=Logical unit not supported
    2600=Invalid field in parameter list
    2601=Parameter not supported
    2602=Parameter value invalid
    2603=Threshold parameters not supported
    2604=Invalid release of active persistent reservation
    2700=Write protected
    2701=Hardware write protected
    2702=Logical unit software write protected
    2703=Associated write protect
    2704=Persistent write protect
    2705=Permanent write protect
    2800=Not ready to change, disc may have changed
    2801=Import or export element accessed
    2900=Power on reset or bus device reset occurred
    2901=Power on occurred
    2902=SCSI bus reset occurred
    2903=Bus device reset function occurred
    2904=Device internal reset
    2a00=Parameters changed
    2a01=Mode parameters changed
    2a02=Log parameters changed
    2a03=Reservations preempted
    2b00=Copy cannot execute since host cannot disconnect
    2c00=Command sequence error
    2c03=Current program area is not empty
    2c04=Current program area is empty
    2c05=Persistent prevent conflict
    2e00=Insufficient time for operation
    2f00=Commands cleared by another initiator
    3000=Incompatible disc installed
    3001=Cannot read disc - unknown format
    3002=Cannot read disc - incompatible format
    3003=Cleaning cartridge installed
    3004=Cannot write disc - unknown format
    3005=Cannot write disc - incompatible format
    3006=Cannot format disc - incompatible disc
    3007=Cleaning failure
    3008=Cannot write - application code mismatch
    3009=Current session not fixated for append
    3100=Disc format corrupted
    3101=Format command failed
    3400=Enclosure failure
    3500=Enclosure services failure
    3501=Unsupported enclosure failure
    3502=Enclosure services unavailable
    3503=Enclosure services transfer failure
    3504=Enclosure services transfer refused
    3700=Rounded parameter
    3900=Saving parameters not supported
    3a00=Disc not present
    3a01=Disc not present - tray closed
    3a02=Disc not present - tray open
    3b0d=Disc destination element full
    3b0e=Disc source element empty
    3b0f=End of disc reached
    3b11=Disc magazine not accessible
    3b12=Disc magazine removed
    3b13=Disc magazine inserted
    3b14=Disc magazine locked
    3b15=Disc magazine unlocked
    3d00=Invalid bits in identify message
    3e00=Logical unit has not self-configured yet
    3e01=Logical unit failure
    3e02=Timeout on logical unit
    3f00=Target operating conditions have changed
    3f01=Microcode has been changed
    3f02=Changed operating definition
    3f03=Inquiry data has changed
    4000=Diagnostic failure on component
    4300=Message error
    4400=Internal target failure
    4500=Select or reselect failure
    4600=Unsuccessful soft reset
    4700=SCSI parity error
    4800=Initiator detected error message received
    4900=Invalid message error
    4a00=Command phase error
    4b00=Data phase error
    4c00=Logical unit failed self-configuration
    4d00=Tagged overlapped commands
    4e00=Overlapped commands attempted
    5100=Erase failure
    5101=Erase failure - incomplete erase operation detected
    5300=Disc load or eject failed
    5302=Disc removal prevented
    5380=Eject button is pressed in prevent condition
    5700=Unable to recover table of contents
    5a00=Operator request or state change input
    5a01=Operator disc removal request
    5a02=Operator selected write protect
    5a03=Operator selected write permit
    5b00=Log exception
    5b01=Threshold condition met
    5b02=Log counter at maximum
    5b03=Log list codes exhausted
    5d00=Failure prediction threshold exceeded
    5dff=Failure prediction threshold exceeded (FALSE)
    5e00=Low power condition on
    5e01=Idle condition activated by timer
    5e02=Standby condition activated by timer
    5e03=Idle condition activated by command
    5e04=Standby condition activated by command
    6000=Lamp failure
    6100=Video acquisition error
    6101=Unable to acquire video
    6102=Out of focus
    6300=End of user area encountered on this track
    6301=Packet does not fit in available space
    6400=Illegal mode for this track
    6401=Invalid packet size
    64C0=Illegal speed for this disc
    6500=Voltage fault
    7200=Session fixation error
    7201=Session fixation error writing lead-in
    7202=Session fixation error writing lead-out
    7203=Session fixation error - incomplete track in session
    7204=Empty or partially written reserved track
    7300=CD control error
    7301=Power calibration area almost full
    7302=Power calibration area is full
    7303=Power calibration area error
    7304=Program memory area update failure
    7305=Program memory area is full
    7306=RMA/PMA is almost full
    8900=Inappropriate command
    9082=Read Write Control Task Error
    9141=Mechanism Control Task Error
    91A1=Mechanism Control Task Error
    C100=Illegal track status
    C200=Reserved track present
    C400=Illegal reserve length for reserve track command
    C500=Buffer underrun
    C601=Unwritten area encountered
    C602=Link blocks encountered
    CC00=Not enough space
    CD00=No track present to close session
    CE00=Unrecordable track descriptor encountered
    CF00=Damaged track present
    D000=PMA area full
    D100=PCA area full
    D400=Exit from pseudo Track-at-once recording

    2=Initialization failed
    3=Read error
    4=Write error
    5=Aborted by user
    6=The current recorder does not support Disc-at-once recording.
    7=Error:\nCannot connect TRF.
    8=Unknown NeroAPI error

    1=PCM Wave File (PCM) (*.wav)
    2=No Filter
    4=Not Available
    5=Could not save CD-ROM settings. Reason:
    9=%s KB (%s bytes)
    10=Data (mode 1)\nData (mode 2)\nData (mode 2)\nData (mode 2)\nData (mode 2)\nData (mode 1)\nData (mode 2)\nAudio\nAudio\nUnknown
    12=??? Untested ???\nUnknown\nAudio\nISO 9660\nHFS\nHybrid\nCD-ROM Mode 1\nCD-ROM Mode 2/XA\nISO 9660 Mode 2/XA\nJoliet\nDVD-ROM
    13=An error occurred while loading the cue sheet file\n'%s'.\n(Line %d).
    14=Free space is %d MB. Size of image file is %d MB.
    15=Cannot load image file
    16=You have mounted a UDF CD. To continue, please eject this CD first.
    17=Warning: Your UDF packet writing software could not be disabled.
    18=The necessary Nero driver could not be installed.
    19=The Win-ASPI file '%s' cannot be found, therefore\nyou can currently select only image recorders.\n\nPlease check for correct Windows ASPI Manager installation\nof your SCSI Host Adapter Software.
    20=The driver '%s' was not recognized. It will be ignored\nand can probably be deleted.
    21=Sorry, this Nero version can only be used with the recorder it has been bundled with.\n\nTo receive a full version of Nero, please contact sales@nero.com\nor visit our web site http://www.nero.com
    22=Sorry, this Nero version supports %s recorders only.\n\nTo receive a full version of Nero, please contact sales@nero.com\nor visit our web site http://www.nero.com
    23=The audio file '%s' is invalid (required: 44.1 kHz, 16 bit, stereo).
    24=This folder already contains a folder named '%s'
    25=This folder already contains a file named '%s'
    26=Total files=%d, identical=%d, different=%d, inaccessible=%d, skipped=%d.
    27=%s at COM%i
    28=The Nero serial number has expired.\nOnly the slowest burning speed will be available.
    29=The file format is not supported.
    30=Reading disc
    31=Writing to cache
    32=Testing speed
    34=Writing to disc
    35=Verifying disc
    36=The file %s, a component of backup restoration program NRESTORE cannot be located.\nPlease make sure that all components are properly installed.
    37=The installation path cannot be located!
    38=The selected hard drive cannot be locked.\nMaybe it is locked by another application.\nIn this case the backup may fail.\nDo you wish to continue?
    39=The file system of selected partition cannot be recognized.\nThis partition cannot be backed up using data compression.
    40=The selected partition is formatted with a file system not supported for reorganizing.\nThis partition cannot be backed up using data compression.
    41=An error occurred while creating backup items.\nThe operation will be aborted.
    42=Due to patent license restrictions, MPEG-2 encoding/converting is not available.\nTo add this feature, please purchase the DVD-Video Plug-in at http://www.nero.com
    43=Simulation not possible for this type of disc. Skipping simulation.
    44=Simulation not possible for this type of disc.
    45=Can only write at %s instead of %s to current disc.
    46=No common write speed for these recorders.
    47=File name is not correct or file was not found.
    48=The boot image file '%s' could not be found.\nAll backup data will be written to the disc, but the first backup disc will not be bootable.\nDo you wish to continue?
    49=Sorry, this kind of compilation cannot be written on the selected recorder(s). Please select a different recorder or modify the settings of your compilation.
    50=Unfortunately your multisession disc is now full. The remaining\nfree space of %d MB on this disc is insufficient to write your\ndata of %d MB.\nTherefore this multisession backup cannot be\ncontinued.\n\nPlease start a new multisession backup on a blank disc.
    51=Simulation not allowed with DRM-protected files!
    52=Speed test not allowed with DRM-protected files!
    55=English (United Kingdom)
    56=English (United States)
    58=French (Belgium)
    59=French (Canada)
    60=French (France)
    61=French (Switzerland)
    62=German (Germany)
    63=German (Switzerland)
    69=Spanish (Latin America)
    70=Spanish (Spain)
    73=Writing data files
    74=Finalizing disc
    75=Error writing file %s
    76=Error reading file %s
    77=Preparation of item '%s' failed.
    78=A backup with the same name already exists at the selected position.\nDo you really want to overwrite it?
    79=You are burning a disc with UDF version 2.50 or higher.\nWindows XP and earlier versions will not be able to mount this disc.
    80=You have inserted a disc (DVD+RW, DVD-RAM, HD DVD-RAM, or BD-RE)\nwhich is not compatible with UDF virtual partition.\nThe result may not be readable.\nOnly CD-R, CD-RW, DVD-R, DVD+R, DVD-RW, HD DVD-R, HD DVD-RW, and BD-R\nare compatible with UDF virtual partition.
    81=Can only write at %dx instead of %dx,\nbecause speed of source data is too slow
    83=%s activated

    0=Please insert the disc to write to...
    1=Please insert a disc to use during simulation...\n\n(Nothing will be written on the disc.)
    2=Please do not remove the disc!\n\nYour recorder requires this eject between simulation and burning. The disc will be reloaded automatically before continuing with burning...
    3=Please do not remove the disc!\n\nYour recorder requires this eject between simulation and burning. Please reinsert the disc...
    4=Please remove the disc and insert the next recordable disc to write to...
    5=Please insert the original disc.
    6=This disc is not writable.\n\nPlease insert a writable disc...
    7=There is not enough space to burn this compilation to this disc.\n\nPlease insert another disc that has enough space...
    8=The disc is blank, invalid\nor a multisession disc.\n\nPlease insert original disc...
    9=The disc is not empty.\n\nPlease insert an empty disc.
    10=Please insert an empty disc to write to...
    11=Please insert an empty disc to use during simulation...\n\n(Nothing will be written on the disc.)
    12=The disc is blank.\n\nPlease insert original disc...
    13=Checking for the disc, please wait...\n\nTo burn this multisession compilation you need the disc containing the previous backup sessions. Please insert this disc if you have not already done so.
    14=To simulate this multisession compilation you need the disc containing the previous backup sessions. Please insert this disc. (Nothing will be written on disc.)
    15=Please do not remove the disc!\n\nYour recorder requires this eject between simulation and burning. Please reinsert the\nsame multisession disc...
    16=Disc analysis failed. The error log\ncontains more information about the reason why it failed.
    17=The recorder does not support this type of disc!\n\nPlease insert a correct disc to write to...
    18=Please do not remove the disc!\n\nYour recorder requires that the disc be ejected between burning and verification. The disc will be reloaded automatically when burning is to continue...
    19=Please do not remove the disc!\n\nYour recorder requires the disc to be ejected between burning and verification. Please reinsert the disc...
    20=The disc is not formatted. Please insert a formatted disc.
    21=Sorry, your compilation cannot be written on this kind of disc. Please insert a disc of the correct type or modify the settings of your compilation to make them compatible with the current disc.
    22=--- Accessing disc, please wait ---
    23=The disc is not empty.
    24=There is not enough space to burn the compilation onto this disc.
    25=There is not enough space to burn the compilation onto this disc.\n\nPlease insert an 80 min/700 MB disc.
    26=Can write multisession or unfinalized DVD-R DL in UDF format only.
    27=Can write multisession or unfinalized DVD-R DL on recorders with Layer Jump Recording support only.
    28=The UDF parameters contain illegal values.
    29=UDF Multisession on multiple recorders is not supported.
    30=Sparable partition type not supported in case multisession is used.
    31=You are trying to burn a disc with a virtual or sparable UDF partition using UDF version 1.02.\nThis is not possible. Please use UDF version 1.50 or above.
    32=You are trying to burn a BD-R multisession disc with an UDF version below 2.60.\nThis is not possible. Please use UDF version 2.60 instead.

Share This Page