Recently Nero isn't letting me burn ANY movies, currently I am trying to burn a 6 clip DVD, I set it for extended play (240 mins), and dolby 2.0 sound, the total space is: 2.12gb out of 4.38gb Why would I be getting not enough space errors with every disc I put in? I'm using Nero 7.2.0.3b
They will probably want a log, and make sure to take out your serial number. Which utility are you using to burn the DVD, Nero Burning ROM or NeroVision or Nero Express? Do you have it set to DVD and not DVD-1? What type of Media are you using and what burn speed? Nero usually has an automatic setting that will adjust the quality to fit the required material on the DVD. You are not using that, it appears so if you did, what would happen?
I am actually using custom settings, automatic gives me the same error, that is why I tried taking the settings down myself. Automatic made it makes it 4.37 out of 4.38gb which could cause a issue. It's on a DVD-R, NeroVision, DVD, Max burn speed (only one availible oddly enough). I will get a log after I make another attempt.
It's been like that with my Liteon DVD burner with all the versions of Nero I have used. Just tried automatic on everything, and same problem. I cannot find the log for Nero, all I found was the installation log.
Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero API version: 7.2.0.3 Using interface version: 7.0.5.6 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\NeroVision Internal Version: 7, 2, 0, 3 Recorder: <LITE-ON DVDRW SOHW-1213S>Version: TS0C - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : WDC WD400EB-75CPF0 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6Y200P0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1213S atapi Port 1 ID 0 DMA: On CdRomPeripheral : SONY DVD-ROM DDU1211 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === LITE-ON DVDRW SOHW-1213S I: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 208MB (213204kB) Memory in use : 59 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 25.5.2006 NeroAPI 2:59:09 AM #1 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 2:59:10 AM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 2:59:10 AM #3 Text 0 File Reader.cpp, Line 124 Reader running 2:59:10 AM #4 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 2:59:11 AM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 2:59:11 AM #6 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 11:04:14 AM #7 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2429423 (539:52.23, 4744MB) 11:04:14 AM #8 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 11:04:14 AM #9 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: LITE-ON DVDRW SOHW-1213S Medium not present 11:04:14 AM #10 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= Not enough free discspace. (Medium in drive: DVD-R. Medium required by compilation: DVD R/RW.) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12/4/2005 11:12:26 PM (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=5, 1, 0, 5, size=102016 bytes, created 4/5/2006 11:34:04 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=5, 1, 0, 5, size=29568 bytes, created 4/5/2006 11:34:22 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=5, 1, 0, 5, size=8832 bytes, created 4/5/2006 11:34:56 AM (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero API version: 7.2.0.3 Using interface version: 7.0.5.6 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\NeroVision Internal Version: 7, 2, 0, 3 Recorder: <LITE-ON DVDRW SOHW-1213S>Version: TS0C - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : WDC WD400EB-75CPF0 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6Y200P0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1213S atapi Port 1 ID 0 DMA: On CdRomPeripheral : SONY DVD-ROM DDU1211 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === LITE-ON DVDRW SOHW-1213S I: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 283MB (290700kB) Memory in use : 44 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 25.5.2006 NeroAPI 1:37:01 PM #1 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 1:37:03 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 1:37:03 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 1:37:03 PM #4 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 1:37:03 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 1:37:03 PM #6 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 1:39:00 PM #7 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2570271 (571:10.21, 5020MB) 1:39:00 PM #8 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 1:39:00 PM #9 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: LITE-ON DVDRW SOHW-1213S Medium not present 1:39:00 PM #10 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= Not enough free discspace. (Medium in drive: DVD-R. Medium required by compilation: DVD R/RW.) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12/4/2005 11:12:26 PM (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=5, 1, 0, 5, size=102016 bytes, created 4/5/2006 11:34:04 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=5, 1, 0, 5, size=29568 bytes, created 4/5/2006 11:34:22 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=5, 1, 0, 5, size=8832 bytes, created 4/5/2006 11:34:56 AM (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero API version: 7.2.0.3 Using interface version: 7.0.5.6 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\NeroVision Internal Version: 7, 2, 0, 3 Recorder: <LITE-ON DVDRW SOHW-1213S>Version: TS0C - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : WDC WD400EB-75CPF0 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6Y200P0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1213S atapi Port 1 ID 0 DMA: On CdRomPeripheral : SONY DVD-ROM DDU1211 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === LITE-ON DVDRW SOHW-1213S I: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 313MB (321104kB) Memory in use : 38 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 25.5.2006 NeroAPI 1:43:49 PM #1 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 1:43:49 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 1:43:49 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 1:43:49 PM #4 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 1:43:49 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 1:43:49 PM #6 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 1:44:08 PM #7 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2570271 (571:10.21, 5020MB) 1:44:08 PM #8 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 1:44:08 PM #9 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: LITE-ON DVDRW SOHW-1213S Medium not present 1:44:08 PM #10 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= Not enough free discspace. (Medium in drive: DVD-R. Medium required by compilation: DVD R/RW.) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12/4/2005 11:12:26 PM (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=5, 1, 0, 5, size=102016 bytes, created 4/5/2006 11:34:04 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=5, 1, 0, 5, size=29568 bytes, created 4/5/2006 11:34:22 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=5, 1, 0, 5, size=8832 bytes, created 4/5/2006 11:34:56 AM (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero API version: 7.2.0.3 Using interface version: 7.0.5.6 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\NeroVision Internal Version: 7, 2, 0, 3 Recorder: <LITE-ON DVDRW SOHW-1213S>Version: TS0C - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : WDC WD400EB-75CPF0 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6Y200P0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1213S atapi Port 1 ID 0 DMA: On CdRomPeripheral : SONY DVD-ROM DDU1211 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === LITE-ON DVDRW SOHW-1213S I: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 324MB (332504kB) Memory in use : 36 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 25.5.2006 NeroAPI 1:47:05 PM #1 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 1:47:05 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 1:47:05 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 1:47:05 PM #4 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 1:47:05 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 1:47:05 PM #6 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 1:47:46 PM #7 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2570271 (571:10.21, 5020MB) 1:47:46 PM #8 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 1:47:46 PM #9 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: LITE-ON DVDRW SOHW-1213S Medium not present 1:47:46 PM #10 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= Not enough free discspace. (Medium in drive: DVD-R. Medium required by compilation: DVD R/RW.) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12/4/2005 11:12:26 PM (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=5, 1, 0, 5, size=102016 bytes, created 4/5/2006 11:34:04 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=5, 1, 0, 5, size=29568 bytes, created 4/5/2006 11:34:22 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=5, 1, 0, 5, size=8832 bytes, created 4/5/2006 11:34:56 AM (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero API version: 7.2.0.3 Using interface version: 7.0.5.6 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\NeroVision Internal Version: 7, 2, 0, 3 Recorder: <LITE-ON DVDRW SOHW-1213S>Version: TS0C - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : WDC WD400EB-75CPF0 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6Y200P0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1213S atapi Port 1 ID 0 DMA: On CdRomPeripheral : SONY DVD-ROM DDU1211 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === LITE-ON DVDRW SOHW-1213S I: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 63MB (65132kB) Memory in use : 87 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 27.5.2006 NeroAPI 1:36:58 AM #1 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 1:36:59 AM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 1:36:59 AM #3 Text 0 File Reader.cpp, Line 124 Reader running 1:36:59 AM #4 Text 0 File Writer.cpp, Line 113 Writer I: LITE-ON DVDRW SOHW-1213S running 1:36:59 AM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 1:37:00 AM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 1:37:00 AM #7 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 1:37:01 AM #8 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2181967 (484:52.67, 4261MB) 1:37:01 AM #9 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 1:37:01 AM #10 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: LITE-ON DVDRW SOHW-1213S, Media type: DVD-R Disc Manufacturer: Prodis - cF01 Disc Application Code: 64, Disc Physical Code: 193 1:37:01 AM #11 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 1:37:01 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2181968 (2181968) = #2181968/484:52.68 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2181968 blocks [I: LITE-ON DVDRW SOHW-1213S] -------------------------------------------------------------- 1:37:01 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [I: LITE-ON DVDRW SOHW-1213S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4468670464, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2181968 | lead-out | 1 | 0x41 | 0x00 1:37:01 AM #14 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 1:37:01 AM #15 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 1:37:01 AM #16 Phase 24 File APIProgress.cpp, Line 278 Caching of files started 1:37:01 AM #17 Text 0 File Burncd.cpp, Line 4199 Cache writing successful. 1:37:01 AM #18 Phase 25 File APIProgress.cpp, Line 278 Caching of files completed 1:37:01 AM #19 Phase 36 File APIProgress.cpp, Line 278 Burn process started at 6x (8,310 KB/s) 1:37:02 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 1:37:02 AM #21 Text 0 File DVDR.cpp, Line 2786 Recording mode: Sequential Recording Mode 1:37:02 AM #22 Text 0 File DVDR.cpp, Line 2942 Start write address at LBA 0 DVD high compatibility mode: Yes 1:37:02 AM #23 Text 0 File Cdrdrv.cpp, Line 8914 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 1:38:13 AM #24 Text 0 File Cdrdrv.cpp, Line 1214 01:38:13.952 - I: LITE-ON DVDRW SOHW-1213S : Queue again later 1:47:56 AM #25 Text 0 File WriterStatus.cpp, Line 116 <I: LITE-ON DVDRW SOHW-1213S> start writing Lead-Out at LBA 2181968 (214B50h), length 0 blocks 1:47:57 AM #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 1:47:57 AM #27 Text 0 File DVDR.cpp, Line 3182 EndDAO: Last written address was 2181967 1:48:15 AM #28 Phase 37 File APIProgress.cpp, Line 278 Burn process completed successfully at 6x (8,310 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12/4/2005 11:12:26 PM (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=5, 1, 0, 5, size=102016 bytes, created 4/5/2006 11:34:04 AM (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero API version: 7.2.0.3 Using interface version: 7.0.5.6 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\NeroVision Internal Version: 7, 2, 0, 3 Recorder: <LITE-ON DVDRW SOHW-1213S>Version: TS0C - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : WDC WD400EB-75CPF0 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6Y200P0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1213S atapi Port 1 ID 0 DMA: On CdRomPeripheral : SONY DVD-ROM DDU1211 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === LITE-ON DVDRW SOHW-1213S I: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 125MB (128068kB) Memory in use : 75 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 28.5.2006 NeroAPI 12:04:25 AM #1 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 12:04:27 AM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 12:04:27 AM #3 Text 0 File Reader.cpp, Line 124 Reader running 12:04:27 AM #4 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 12:04:27 AM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 12:04:27 AM #6 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 8:45:56 PM #7 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 3014991 (669:59.66, 5888MB) 8:45:56 PM #8 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 8:45:56 PM #9 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: LITE-ON DVDRW SOHW-1213S Medium not present 8:45:56 PM #10 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: unknown. Medium required by compilation: DVD R/RW.) Not enough free discspace. (Medium in drive: DVD-R. Medium required by compilation: DVD R/RW.) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/18/2006 4:34:55 PM (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=5, 1, 0, 5, size=102016 bytes, created 4/5/2006 11:34:04 AM (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero API version: 7.2.0.3 Using interface version: 7.0.5.6 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\NeroVision Internal Version: 7, 2, 0, 3 Recorder: <LITE-ON DVDRW SOHW-1213S>Version: TS0C - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : WDC WD400EB-75CPF0 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6Y200P0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1213S atapi Port 1 ID 0 DMA: On CdRomPeripheral : SONY DVD-ROM DDU1211 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === LITE-ON DVDRW SOHW-1213S I: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 292MB (299896kB) Memory in use : 42 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 29.5.2006 NeroAPI 9:47:52 PM #1 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 9:47:53 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 9:47:53 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 9:47:53 PM #4 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 9:47:53 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 9:47:53 PM #6 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 9:48:08 PM #7 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2550207 (566:42.57, 4980MB) 9:48:08 PM #8 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 9:48:08 PM #9 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: LITE-ON DVDRW SOHW-1213S Medium not present 9:48:08 PM #10 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= Not enough free discspace. (Medium in drive: DVD-R. Medium required by compilation: DVD R/RW.) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/18/2006 4:34:55 PM (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=5, 1, 0, 5, size=102016 bytes, created 4/5/2006 11:34:04 AM (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero API version: 7.2.0.3 Using interface version: 7.0.5.6 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\NeroVision Internal Version: 7, 2, 0, 3 Recorder: <LITE-ON DVDRW SOHW-1213S>Version: TS0C - HA 1 TA 0 - 7.2.0.3 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : WDC WD400EB-75CPF0 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6Y200P0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1213S atapi Port 1 ID 0 DMA: On CdRomPeripheral : SONY DVD-ROM DDU1211 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === LITE-ON DVDRW SOHW-1213S I: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 189MB (193676kB) Memory in use : 63 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 30.5.2006 NeroAPI 3:12:16 PM #1 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 3:12:17 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 3:12:17 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 3:12:18 PM #4 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 3:12:18 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 3:12:18 PM #6 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 4:45:58 PM #7 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2514207 (558:42.57, 4910MB) 4:45:58 PM #8 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 4:45:58 PM #9 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: LITE-ON DVDRW SOHW-1213S Medium not present 4:45:58 PM #10 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= Not enough free discspace. (Medium in drive: DVD-R. Medium required by compilation: DVD R/RW.) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/18/2006 4:34:55 PM (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=5, 1, 0, 5, size=102016 bytes, created 4/5/2006 11:34:04 AM (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Last address to be written is past last possible write address. It looks to me like you only have 2.3 gigs available on the media--has it been formatted or something? It also says it needs a DVD +R/RW and you are using a DVD -R You also have InCD installed, you might want to uninstall that. It may be causing the problem.
Alright, let's see what we have here... Only having a look at the last log, you can delete the other 2 to save space in the thread... Your firmaware needs updating, that way you'll have a better media compatibility, like newer discs etc, among other stuff... The last version for your drive is TS0J... Get it here: http://www.liteonit.com.tw/DOWNLOADS/ODD/SOHW-1213S/firmware/DR12TS0J.zip (it's off at the moment, but will be back there soon.) This version is quite problematic, we normally try to warn people to use the proven bug free versions like the 7.0.8.2. Download it from here: http://www.filehippo.com Now, this: this and this I never seen before... Yet... Major thing here. InCD is a nightmare, it messes up Nero. Zap it out with this handy tool. http://ww2.nero.com/nero7/enu/InCD_CleanTool.html I would say that the problem IS InCD, since it's asking for a +RW disc.
Updated Firmware + Removed InCD with that utility. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero API version: 7.2.0.3 Using interface version: 7.0.5.6 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\NeroVision Internal Version: 7, 2, 0, 3 Recorder: <LITE-ON DVDRW SOHW-1213S>Version: TS0J - HA 1 TA 3 - 7.2.0.3 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : WDC WD400EB-75CPF0 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6Y200P0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1213S atapi Port 1 ID 0 DMA: On CdRomPeripheral : SONY DVD-ROM DDU1211 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === LITE-ON DVDRW SOHW-1213S E: CDRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 236MB (241912kB) Memory in use : 53 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 1.6.2006 NeroAPI 7:24:26 PM #1 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 7:24:27 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 262144KB of Memory 7:24:27 PM #3 Text 0 File Reader.cpp, Line 124 Reader running 7:24:27 PM #4 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 7:24:27 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 7:24:27 PM #6 Text 0 File Burncd.cpp, Line 3365 Turn on Disc-At-Once, using DVD media 7:31:47 PM #7 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2551535 (567:00.35, 4983MB) 7:31:47 PM #8 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 7:31:47 PM #9 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: LITE-ON DVDRW SOHW-1213S Medium not present 7:31:47 PM #10 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= Not enough free discspace. (Medium in drive: DVD-R. Medium required by compilation: DVD R/RW.) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/18/2006 4:34:55 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ======
Nothing appears to have changed. Are you using a DVD +R? Did you do a cold boot after you made the changes? Did you use a new unloaded DVD? I say unloaded, because if you put the DVD in a drive with InCD running, it may have altered the disc.
Heres my take on your log Quote: Nero API version: 7.2.0.3 and 7.2.0.3b These latest versions of Nero are full of bugs, I recommend you uninstall, run this clean tool http://ww2.nero.com/nero7/enu/Nero7_CleanTool.html and then install 7.0.8.2 a more stable version from here http://www.filehippo.com/download_nero_7_premium/?845
Hi, Just browsing and noticed permiggs briefly touched on this: You are trying burn way more than your dvd can hold. (this is on your 1 jun log above saltgrass' post). After you have done the other recommended fixes I also suggest you run your project thru nero recode and set the target output file to 4300mb. Solution number 2 would be to use a dual layer disk. Otherwise you will end up with another error. As a matter of fact this seems to be the case with most of your nero logs which might be where the issue with not enough space on disk issue.
Of course!! It's asking you for a Dual Layer disc!! You need to remove stuff off the project to be able to burn on a normal disc... Have this: http://forums.afterdawn.com/thread_view.cfm/316083 Thanks for waking me up Matt... LOL
No problem permiggs I'm still learning to read nero logs so I usually peek in on gwendolin's, maxburn, and loceng assessments (along with google). Its a 'group effort' here to get OoPpEe to get a good burn .
@OoPpEe You didnt post the whole burn log. I am not talking about all the burns, but in the last log you posted, parts of it were missing. Also, your error is that your target size is somehow always set to a capacity that is higher than a DVD+ or - R can handle. As suggested, set your target size to Custom 4300, and you will not burn the last 1mm of disc space. I use 4400, but i know my media is good all the way to the end, and a 4400 target makes encoding/transcoding use less compression. Let me see if i can find the target setting in Vision. I will post a screen shot of the target setting if you need it, but i dont have one handy right now.
That size is if you were going to burn those files to dvd without any conversion. The converted size is why you are not able to burn to dvd as your original files were most likely not in dvd format. As I pointed out earlier your output files once nero calculatesthesize of the file to be burnt determined your project would not fiton the disk.
It has been my experience that the majority of members who are using either Nero 7.2.0.3 or 7.2.0.3b are experiencing problems that they haven't encountered before. All we can do is advise you of something that we believe is causing the problem...in the end it's up to you whether you wish to heed our recommendations. Stick around this forum and check out some failed burnings and you'll see what we mean.
Don't know, but perhaps some possibilities--maybe there are extra files being burned that are not showing up in the compliation (need burn log to check this). The burn settings being used to calculate the 2.3 gig number are not the ones being used to actually burn the project. During transcoding, the files are actually increasing in size because of the way they are encoded. Maybe something got corrupted and is not encoding the files correctly. Have you tried 5 instead of 6 clips? Is it just one type of file or files you have problems with, or other types also. Have you tried exporting the project first and use the resulting mpg file back in NeroVision and try burning it that way.
