Any thought on why. I have been having this problem for a while. Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 11:03:20 AM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 10:35:34 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e Recorder: <Memorex DVD+/-RW Dual-X1>Version: 1.07 - HA 0 TA 3 - 6.6.0.18 Adapter driver: <nvatabus> HA 0 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HP CD-Writer+ 8200a>Version: 1.0g - HA 0 TA 2 - 6.6.0.18 Adapter driver: <nvatabus> HA 0 === Scsi-Device-Map === DiskPeripheral : WDC WD800BB-00CAA1 nvatabus Port 0 ID 0 DMA: Off DiskPeripheral : ST3160023A nvatabus Port 0 ID 1 DMA: Off CdRomPeripheral : HP CD-Writer+ 8200a nvatabus Port 0 ID 2 DMA: Off CdRomPeripheral : Memorex DVD+/-RW Dual-X1 nvatabus Port 0 ID 3 DMA: Off === CDRom-Device-Map === HP CD-Writer+ 8200a F: CDRom0 Memorex DVD+/-RW Dual-X1 G: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 2047MB (2097151kB) Free physical memory: 2013MB (2062020kB) Memory in use : 21 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 25.4.2006 UDF/ISO compilation 8:53:31 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 8:53:37 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 8:53:37 PM #3 Text 0 File Isodoc.cpp, Line 6359 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 8:53:37 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 8:53:37 PM #5 Text 0 File Reader.cpp, Line 127 Reader running 8:53:37 PM #6 Text 0 File Writer.cpp, Line 122 Writer Memorex DVD+/-RW Dual-X1 running 8:53:37 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 8:53:37 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 8:53:37 PM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 8:53:37 PM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2289055 (508:40.55, 4470MB) 8:53:37 PM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 8:53:37 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: Memorex DVD+/-RW Dual-X1, Media type: DVD-R Disc Manufacturer: Prodis - cF02 Disc Application Code: 64, Disc Physical Code: 193 8:53:37 PM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:53:37 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2289056 (2289056) = #2289056/508:40.56 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2289056 blocks [Memorex DVD+/-RW Dual-X1] -------------------------------------------------------------- 8:53:37 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [Memorex DVD+/-RW Dual-X1] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4687986688, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2289056 | lead-out | 1 | 0x41 | 0x00 8:53:38 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 8:53:38 PM #17 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 8:53:38 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 8:53:38 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 8:53:38 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 8:53:38 PM #21 Text 0 File DVDR.cpp, Line 2571 Recording mode: Sequential Recording Mode 8:53:38 PM #22 Text 0 File Mmc.cpp, Line 21774 Set BUFE: Buffer underrun protection -> ON 8:53:38 PM #23 Text 0 File DVDR.cpp, Line 2726 Start write address at LBA 0 DVD high compatibility mode: Yes 8:53:38 PM #24 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 8:53:41 PM #25 Text 0 File Cdrdrv.cpp, Line 1288 20:53:41.515 - Memorex DVD+/-RW Dual-X1\H0 T3 : Queue again later 8:53:44 PM #26 SCSI -1061 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 0, TA 3, LUN 0, buffer 0x04300000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x44 Sense Qual: 0xD9 CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x44 0xD9 8:53:44 PM #27 CDR -1061 File Writer.cpp, Line 311 Internal target failure 8:53:44 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 8:53:44 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 8:53:44 PM #30 Text 0 File DVDR.cpp, Line 2969 EndDAO: Last written address was 767 8:53:44 PM #31 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/17/2002 10:05:10 AM File 'Drivers\nvatabus.sys': Ver=5.10.2600.0479 built by: WinDDK, size=87936 bytes, created 12/7/2004 4:15:54 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
These need to be on, heres a link to a guide to turn them on http://forums.afterdawn.com/thread_view.cfm/260038 Poor quality discs and your burner doesnt recognize them, try some Verbatim or sony that are made in japan
ProDiscs suck almost as bad memorex. Try better media. Sony, Ritek, Taiyo Yuden, Verbatim.... (why is the post I posted first on the bottom? That is weird...)
@Coma13 Turn the dma back to on. Here's a guide: http://club.cdfreaks.com/showthread.php?t=101616 You also have nvidia drivers so this guide may not help. For that the last post in this thread should help: http://forums.afterdawn.com/thread_view.cfm/1/323802 Now the other problem may be all your drive all connected on the same ide channel. This could be the cause for the internal target failure. Set you HP + Memerox writer to the secondary channel - ypur hard drives set to the primary. All should have a separate power supply. The discs Prodisc are okay but I think trying the 1st 2 may help you out.
Can you explain how to Set my HP + Memerox writer to the secondary channel - and my hard drives set to the primary? I am new to the internals of the PC. Thanks in advance for the help
@coma12 You'll need to take off the case of the pc and remove the 2 dvd/cd drives from the primary cable and locate the secondary ide cable to attach them. You should also have separate power connectors from the power supply. A few other things too but here's a guide from HP to help you out: http://h10025.www1.hp.com/ewfrf/wc/...c=en&product=57620〈=en&docname=lpg40238 If your not comfortable w/ this you may need to get someone who is. Not really hard but better to get it done right.
