new codes for ntl uk 17/03/08

Thanks again for that advice,,,only probelm is like a few other novices like myself, i,m not sure of the step by step guide of how to do it. I,ve got as far as downloaded the firmware to my Pc...any advice would be appreciated

 

Once you have selected the right firmware for your box and location
Updating Firmware just follow the instructions below and you should be ok,

Connect your box and PC with a Null modem cable and switch on the cable box and put it on STANDBY.
(The Starview does not need to be connected to TV to update it with GTROM)

Open GTROM Loader software make sure that you set the correct COM PORT
that matches the one that is being used

Make sure App file only is selected, then click Bin File & browse to the firmware where you downloaded it to on your PC.

Run the GTROM loader by pressing Download and you will see the % progress increase
then Download completed message on your PC.
Wait until you see the DOWNLOAD COMPLETE pop up on your PC before
removing the NULL MODEM CABLE. The Starvi*w will then reboot

Turn off and turn back on , then plug your tv cable and scart back in


* You should download the Starview PDF guide this will give you step by step instructions on how to do everything.This can be found in the Starview Documentation folder in the link.

 

Appreciate that info...will give it a try