i never really had this problem before with nero, but ever since i re intalled xp i started getting errors when ever i burn a dvd etc. So i did some research and some websites said to replace the ASPI files, so i did, and i still got the same problem. Then they said to enable DMA mode, i did that too, and same problem. I uninstalled/reinstalled nero and nothing. i have watsed about 15 discs and im hoping not waste anymore. i got a log for you guys as well and any help will be appreciated!! Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 02:20:56 ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 17/06/2003 14:25:04 Nero version: 6.0.0.23 (Nero Express) Recorder: <DVDRW IDE 16X> Version: A091 - HA 1 TA 0 - 6.0.0.23 Adapter driver: <IdeChnDr> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <MATSHITA DVD-ROM SR-8586 >Version: 3G15 - HA 1 TA 1 - 6.0.0.23 Adapter driver: <IdeChnDr> HA 1 === Scsi-Device-Map === DiskPeripheral : ST340810A IdeChnDr Port 0 ID 0 DMA: On DiskPeripheral : WDC WD200EB-11BHF0 IdeChnDr Port 0 ID 1 DMA: Off CdRomPeripheral : DVDRW IDE 16X IdeChnDr Port 1 ID 0 DMA: On CdRomPeripheral : MATSHITA DVD-ROM SR-8586 IdeChnDr Port 1 ID 1 DMA: Off === CDRom-Device-Map === DVDRW IDE 16X D: CDRom0 MATSHITA DVD-ROM SR-8586 E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 239MB (244956kB) Memory in use : 53 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 9.5.2006 CD-ROM (ISO) 12:59:12 #1 Text 0 File Isodoc.cpp, Line 6013 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 12:59:12 #2 Phase 89 File dlgbrnst.cpp, Line 1803 Super Link activated 12:59:12 #3 Text 0 File Reader.cpp, Line 118 Reader running 12:59:12 #4 Text 0 File Writer.cpp, Line 124 Writer DVDRW IDE 16X running 12:59:12 #5 ISO9660GEN -11 File geniso.cpp, Line 3882 First writeable address = 0 (0x00000000) 12:59:12 #6 Text 0 File Burncd.cpp, Line 3218 Turn on Track-at-once, using CD-R/RW media 12:59:13 #7 Text 0 File DlgWaitCD.cpp, Line 233 Last possible write address on media: 359845 (79:59.70) Last address to be written: 19949 ( 4:27.74) 12:59:13 #8 Text 0 File DlgWaitCD.cpp, Line 238 Write in overburning mode: FALSE 12:59:13 #9 Text 0 File DlgWaitCD.cpp, Line 1997 Recorder: DVDRW IDE 16X; CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation ATIP Data: Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid) 12:59:13 #10 Text 0 File DlgWaitCD.cpp, Line 398 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:59:13 #11 Text 0 File ThreadedTransferInterface.cpp, Line 773 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 19950 (19950) = #19950/4:26.0 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 19948 blocks [DVDRW IDE 16X ] -------------------------------------------------------------- 12:59:13 #12 Text 0 File ThreadedTransferInterface.cpp, Line 942 Prepare recorder [DVDRW IDE 16X ] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 41164800, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 19950 | lead-out | 1 | 0x00 | 0x41 12:59:13 #13 Text 0 File ThreadedTransferInterface.cpp, Line 969 Removed 2 run-out blocks from end of track 1. 12:59:13 #14 Phase 24 File dlgbrnst.cpp, Line 1803 Caching of files started 12:59:13 #15 Phase 25 File dlgbrnst.cpp, Line 1803 Caching of files completed 12:59:13 #16 Phase 36 File dlgbrnst.cpp, Line 1803 Burn process started at 48x (7,200 KB/s) 12:59:13 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2146 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 12:59:13 #18 Text 0 File Mmc.cpp, Line 19359 Set BUFE: Super Link -> ON 12:59:26 #19 SCSI -1024 File Cdrdrv.cpp, Line 1427 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04550000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x08 Sense Qual: 0x03 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x08 0x03 12:59:26 #20 CDR -1024 File Writer.cpp, Line 301 Communication failure 12:59:26 #21 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 12:59:30 #22 CDR -201 File WriterStatus.cpp, Line 193 Invalid write state DVDRW IDE 16X\H1 T0 12:59:30 #23 TRANSFER -18 File WriterStatus.cpp, Line 193 Could not perform EndTrack 12:59:30 #24 Text 0 File Mmc.cpp, Line 14342 <DVDRW IDE 16X > start Close Session 12:59:47 #25 Text 0 File dlgbrnst.cpp, Line 1661 Set remaining time: 0:00,000 (0ms) -> OK 12:59:47 #26 Phase 39 File dlgbrnst.cpp, Line 1803 Burn process aborted Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 01:53:02 File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11/03/2005 23:28:09 (Prassi/Veritas driver for win 2K) File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14/08/2002 00:00:00 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) thanks! roshy.
This version of Nero is ancient..try for update here http://httpdl1.usw.nero.com/software/Nero6/Nero-6.6.0.18_no_yt.exe These are horrible discs, I would try some Verbatim or Sony that is made in japan, heres a link concerning CMC mag discs http://forums.afterdawn.com/thread_view.cfm/262544 These need to be on, go here for guide http://forums.afterdawn.com/thread_view.cfm/260038
A couple of things to add here: check the cables and connections on that burner. It failed to communicate. I couldnt find firmware updates for this drive; If you know the drive manufacture, it would help in finding firmware for it. I suspect it is out of date. Your old version of nero isnt recognizing that drive and the nero update Gwen suggested might help. Also, even though you are only burning a CD, 48x burning is too fast. I dont go over 16x on CD burns. All you have to do is look at my sig pic to see what i think about CMC discs.
first of all thanks for replying. i just installed the nero gwendolin posted, i tried to burn a data cd using Memorex Cd-rs and the same thing happened. Also my dvd rw drive is an EMPREX make i recently flashed the drive with the latest firmware available. i got the log for this attempt so hope this will give some clues to whats wrong! Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 02:20:56 ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34 Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e (Nero Express) Recorder: <DVDRW IDE 16X> Version: A091 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <IdeChnDr> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <MATSHITA DVD-ROM SR-8586 >Version: 3G15 - HA 1 TA 1 - 6.6.0.18 Adapter driver: <IdeChnDr> HA 1 === Scsi-Device-Map === DiskPeripheral : ST340810A IdeChnDr Port 0 ID 0 DMA: On DiskPeripheral : WDC WD200EB-11BHF0 IdeChnDr Port 0 ID 1 DMA: Off CdRomPeripheral : DVDRW IDE 16X IdeChnDr Port 1 ID 0 DMA: On CdRomPeripheral : MATSHITA DVD-ROM SR-8586 IdeChnDr Port 1 ID 1 DMA: Off === CDRom-Device-Map === DVDRW IDE 16X D: CDRom0 MATSHITA DVD-ROM SR-8586 E: CDRom1 ======================= AutoRun : 0 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 106MB (109556kB) Memory in use : 79 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 12.5.2006 CD-ROM (ISO) 11:32:00 #1 Text 0 File Isodoc.cpp, Line 6359 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 11:32:00 #2 Text 0 File Burncd.cpp, Line 2948 DVDRW IDE 16X Super Link activated 11:32:00 #3 Text 0 File Reader.cpp, Line 127 Reader running 11:32:00 #4 Text 0 File Writer.cpp, Line 122 Writer DVDRW IDE 16X running 11:32:00 #5 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 11:32:00 #6 Text 0 File Burncd.cpp, Line 3233 Turn on Track-At-Once, using CD-R/RW media 11:32:01 #7 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 359845 ( 79:59.70) Last address to be written: 317102 ( 70:30.02) 11:32:01 #8 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 11:32:01 #9 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: DVDRW IDE 16X; CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation ATIP Data: Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid) 11:32:01 #10 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:32:01 #11 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 317103 (317103) = #317103/70:28.3 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 317101 blocks [DVDRW IDE 16X] -------------------------------------------------------------- 11:32:01 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [DVDRW IDE 16X] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 649734144, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0x00 -150 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 317103 | lead-out | 1 | 0x41 | 0x00 11:32:01 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1119 Removed 2 run-out blocks from end of track 1. Length: 317103 -> 317101. 11:32:01 #14 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 11:32:01 #15 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 11:32:01 #16 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 11:32:01 #17 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 32x (4,800 KB/s) 11:32:01 #18 SCSI -1189 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x036D5400 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x02 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x02 11:32:01 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:32:01 #20 Text 0 File Mmc.cpp, Line 21774 Set BUFE: Super Link -> ON 11:32:21 #21 SCSI -1024 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06970000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x08 Sense Qual: 0x03 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0xA0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x08 0x03 11:32:21 #22 CDR -1024 File Writer.cpp, Line 311 Communication failure 11:32:21 #23 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:32:21 #24 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 11:32:24 #25 CDR -201 File WriterStatus.cpp, Line 200 Invalid write state DVDRW IDE 16X\H1 T0 11:32:24 #26 TRANSFER -18 File WriterStatus.cpp, Line 200 Could not perform EndTrack 11:32:24 #27 Text 0 File Mmc.cpp, Line 16452 <DVDRW IDE 16X > start Close Session 11:32:41 #28 Phase 39 File dlgbrnst.cpp, Line 1832 Burn process aborted Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 01:53:02 File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11/03/2005 23:28:09 (Prassi/Veritas driver for win 2K) File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14/08/2002 00:00:00 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) thanks!
As explained by both myself and MaxBurn, these are possibly the WORST discs you can use, they are made by CMC Mag..change them and then see how things go. BTW..Did you read the link I provided about your discs.
i did read the link u posted, i never knew that about these discs! i've been ripped off, might as well throw them all in the bin! I'll try another type of disc and i'll keep you updated with what happens! thanks
i did read the link u posted, i never knew that about these discs! i've been ripped off, might as well throw them all in the bin! I'll try another type of disc and i'll keep you updated with what happens! thanks
ok now i tried to make a data cd with a blank dvd-r. and i got the same thing. here's a picture to show you and i'll post the log below. and here's the log Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 02:20:56 ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34 Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e (Nero Express) Recorder: <DVDRW IDE 16X> Version: A091 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <IdeChnDr> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <MATSHITA DVD-ROM SR-8586 >Version: 3G15 - HA 1 TA 1 - 6.6.0.18 Adapter driver: <IdeChnDr> HA 1 === Scsi-Device-Map === DiskPeripheral : ST340810A IdeChnDr Port 0 ID 0 DMA: On DiskPeripheral : WDC WD200EB-11BHF0 IdeChnDr Port 0 ID 1 DMA: Off CdRomPeripheral : DVDRW IDE 16X IdeChnDr Port 1 ID 0 DMA: On CdRomPeripheral : MATSHITA DVD-ROM SR-8586 IdeChnDr Port 1 ID 1 DMA: Off === CDRom-Device-Map === DVDRW IDE 16X D: CDRom2 MATSHITA DVD-ROM SR-8586 E: CDRom1 ======================= AutoRun : 0 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 146MB (150220kB) Memory in use : 71 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 12.5.2006 ISO compilation 12:41:03 #1 Text 0 File Isodoc.cpp, Line 6359 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 12:41:03 #2 Text 0 File Reader.cpp, Line 127 Reader running 12:41:03 #3 Text 0 File Writer.cpp, Line 122 Writer DVDRW IDE 16X running 12:41:03 #4 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 12:41:03 #5 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 12:41:03 #6 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1433151 (318:28.51, 2799MB) 12:41:03 #7 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 12:41:03 #8 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: DVDRW IDE 16X, Media type: DVD+R Disc Manufacturer ID: AML, Media Type ID: 002, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 12:41:03 #9 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:41:03 #10 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1433152 (1433152) = #1433152/318:28.52 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1433152 blocks [DVDRW IDE 16X] -------------------------------------------------------------- 12:41:06 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [DVDRW IDE 16X] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2935095296, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1433152 | lead-out | 1 | 0x41 | 0x00 12:41:06 #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 12:41:06 #13 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 12:41:06 #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 12:41:06 #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 8x (11,080 KB/s) 12:41:06 #16 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03835800 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x24 0x00 12:41:06 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 12:41:06 #18 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: AML..... Media type ID: 002 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 41 4D 4C 00 00 - 00 00 00 30 30 32 00 38 ...AML.....002.8 23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 12:41:06 #19 Text 0 File DVDR.cpp, Line 5968 Drive: DVDRW IDE 16X Book Type request [BTC]: DVD-ROM Changing the Book Type was finished successfully, return code 0 12:41:06 #20 CDR -1207 File DVDR.cpp, Line 5306 Book Type automatically set to: DVD-ROM 12:41:06 #21 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 12:41:27 #22 SCSI -1024 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0B040000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x08 Sense Qual: 0x03 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x08 0x03 12:41:27 #23 CDR -1024 File Writer.cpp, Line 311 Communication failure 12:41:27 #24 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 12:41:27 #25 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 12:43:10 #26 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 12:43:10 #27 Phase 130 File dlgbrnst.cpp, Line 1832 Generating DVD borders aborted 12:43:10 #28 Text 0 File DVDR.cpp, Line 5968 Drive: DVDRW IDE 16X Book Type request [BTC]: DVD+R Changing the Book Type was finished successfully, return code 0 12:43:10 #29 Phase 39 File dlgbrnst.cpp, Line 1832 Burn process aborted Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 01:53:02 File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11/03/2005 23:28:09 (Prassi/Veritas driver for win 2K) File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14/08/2002 00:00:00 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) sorry for the long posts, i really need my dvd rw to work cus im running out of space on my hdd.
Your image didnt make it on the first post because you had in caps and they should be lower case. The linked pic showed the communication error stopped you again. You will need to fix that, or nothing will work. The computer cant talk to the drive. Check the cables to the burner on both ends, burner and controller/or motherboard. The IDE ribbon cable might be defective, or came loose at one end or the other. [quote]Sense Key: 0x04 (KEY_HARDWARE_ERROR) [/quote] The drive could also be defective. Check the cables first. You can also try running Nero Info Tools and see what it reports back. These discs [quote]Disc Manufacturer ID: AML..... [/quote] are not the greatest in the world either. Verbatim or Taiyo Yuden discs are all i will use, and i recommend you try one of those. Of course, we have to get the comm failure fixed or nothing will work. The cable might not be it, as the thing did booktype to DVD-ROM and there had to be some communication to the drive for that to happen. Also try uninstalling your burner drivers to fix the DMA problem, and it might straighten up the communication problem.. Might. I suspect you have a major hardware error going on. You are doing a multi-session disc in these logs, and those are not finalized. [quote]Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession [/quote] That keeps the disc open for more data to be added later. Until you close the disc, it will not be able to be read by stand alone players. Just for grins, try running Nero Info Tools and check all the tabs to see if it is reporting any conflicts. Installing a new ASPI over an old one can cause problems if some of the old ASPI files are still there. Info tool should report back on any conflict going on. Your drive is being recognized by Nero now, and it wasnt on the first log. We are making some progress. I am not sure what this thing is [quote]Adapter driver: <IdeChnDr> HA 1[/quote] but it may have to be replaced with a windows driver. I know NVIDA drivers have to be removed to get Nero to work. and your DVD ROM drive can be updated to 3G24 at least. [url]http://forum.rpc1.org/dl_firmware.php?download_id=111[/url] I still cant find a firmware listing for that EMPEREX drive. I found it.. It is EMPREX, not EMPEREX and the A091 looks like current for that drive. (had to go to the emprex site to find it).
thank you gwendolin and MaxBurn for all your help, i managed to fix my problem by replacing the IDE cable and installing the newest version of nero, and hopefully i won't get the same problem in the future!!
@roshy Yeah! Glad you got it fixed. That hardware error in the log was pointing to the drive or cable, but we never know for sure until you report back. Thanks for letting us know what happened. Always go with the cheapest troubleshooting things first: software, media, cables, hardware. You did it right, and saved yourself from buying a new burner, though i always buy the hardware first to justify fixing an error, when all i really wanted was a new burner. Strange thing is, i live alone, so i am trying to hide my real motive from myself.. Huh? Oh well, fixing your problem is much easier than fixing what goes on in my head.. LOL May your lasers burn brightly! (kinda like may the force be with you)
