nokia dbox debug bootmanager

You have now to use the arrow up button and flash reset after seeing reset.
Its a timing problem. If you see the numbers at the lcd display you have 1 or 2 seconds for the flash reset.

 

hi thanks, please correct or confirm
everything in bootmanager corrrect as it should be
i start bootmanager,
then the box,
then once the bootmanager finds the box reset is flashing press standby hold up button i get the numbers eg 1234567 1234 then i hit the flash reset point?

thanks for your help

 

once this is all done (debug) i have read about extracting ucodes once debug has complete, if i dont tv will not be viewable etc? can you confirm this and how its done as it does nt mention how to do that in the tuts just big red writing at the bottom of the tutorials, im assuming it is very important i do this ?

 

Forget the ucodes. Every UK modded image include all necessary things.
Your sequence is right.
The ppcboot get transfered to the dbox, the bootloader detects a non matching security checksum and is doing a reset.
You don't have to use the first reset for the button and flash reset.
You can use the fourth or fifth or any other after you are ready.

 

hi thanks for the time you took in helping me and the advice you gave, its all debugged now flashed and working

 

can any one tell me if i can unlock the channels with the remote its a nokia 2 flash

 

is your box in debug mode? if it is your most prob better asking in the general dbox forum you ll get a better responce there

 

the box works fine but most channels are locked