Nokia Dbox2

http://www.4shared.com/file/43167839/61713271/mtd3.html

 

in network connects right click your connecting go to properitys select obtain an ip and put in 192.168.1.2 then go to the box change the ip to 192.168.1.1 and restart newwork then reboot then connect via FTP with 192.168.1.1 username root password dbox

 

sorry obtain the ip in the TCP

 

Hey i was wondering if any one could help? i got another dbox 2 2xintel chip setup. but haveing problems flashing it. I mistakenly flashed the wrong image. it gets stuck on loading kernel. i followed the guides and read lots of past threads and still no luck
i used the ifa. an it says that i got a firewall. i have turened it all off. and i have no problem updateing me other box with diffrent files. I noticed some of the guides mentioned a xp.reg file to run(i haven't got this file i don't know where i would get it + i running windows vista. I think this is me problem. Can u help???

this is part of what i get???
ßdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast

------ Extra Informations ------
Selected Network adapter: Intel(R) PRO/100 VE Network Connection (0)
IP-Adress of the Network Adapter: 192.168.0.7
IP-Adress of the Dbox: 192.168.0.202
Comport:
Operatingsystem: Professional Service Pack 1 (Build 6001)
CPU 1: Intel(R) Pentium(R) D CPU 3.00GHz @ 3000 MHz
CPU 2: Intel(R) Pentium(R) D CPU 3.00GHz @ 3000 MHz
Filename of the Images: mtd3.img
Imagetype: Two Flashs
DBOX-IFA Version: 2.2
------ Powered by http://www.dboxservice-hallenberg.de ------

 

Hi there lads and lasses Forby69 back again still trying now connected by cable to fxp and trird all settings mentioned and when setting al 3 ip def and dns 192 168 1 3 i get a delay of 20 secs before message con failed lost. however when running test network now am getting D box reachable ping
default gateway reachable ping
dns server reachable ping
but i am still not connecting . my computer ip is 79.68.188.248
does that come into play .Someone has got to have the answer please. getting desprat Forby

 

my connection is showing as limited or mno connection, why would this be?

 

thank you oggnogg i wonder if this is my problem all along when i go to control-right click net connections i dont get obtain an ip ,just "local area connections" and if i click properties on that i get local network connected, sis900 fast ethernet adapter

 

when ya right click on local area connections click on properitys then select TCP and right click go to properitys in there sorry my mistake you then tick (use the following ip)my mistake and add the 192.168.1.1 and box set at 1.2

 

OGGNOGG maybe you coulp help me here?
also when im dropping these files into the correct folder(when i find out which one it is)should the box be off ie at the mains as i did manage to send a picture to the box with it switched on & it came through ok
and hopefully my final question is do i need to reboot or rescan the box after adding the new rom files into the relevant folder

 

The box has to be on and Copy and replce optoin you will be asked after doing that reboot the box of full power not just a remote reboot as it doesnt always work

 

Certainly dont do a rescan as you will F**K up the Service & Boq that are in your image

 

cheers mate but how do i get "copy & replace"? & i need to know which folder to drop the files into is it KEYS or SCCE (both folders seem to contain the same files but only the SCCE file says var keys in the blue header bar at the top when i open the folder)
thanks again oggnogg youre being a great help i hope everyone appreciates all the help youre giving them!!

 

oh oh i did a scan at he beginning of the crash (dont suspect im the only one though) will this make a difference?
will i now need to flash a new image to my box?& would i need to flash the fixed roms onto the new image?

 

I have now managed to connect to the box by changing my ip tcp settings (thanks a lot for that

i have followed the instructions below but stil dont get the channels, do i need to do something after i overwrite the file?

1 get flash fxp > ftp

2 get the file > http://www.4shared.com/file/43880742/b756ed13/nagrarom7.html

and unzip it

3 plug an ethernet cable in to your computer and box.

4 go to dbox then network on your box remote.

5 go to flash fxp on your computer and pick file then quick connect.

6 type your ip address from the box and put user name as root and password as dbox2 and connect.

if it doesnt connect change your box ip and dns and default gateway the same: 192.168.000.003 and then pick start\restart network on the box.

7 once connected go to var\keys and put the file in and overwrite.

8 wait a few seconds and your box will come back on.

 

What image and area you in

 

it should mess around the auto roll but will with the channels list

 

Var/keys

 

Scot what area are you in you might have told me but im braindead with helping 500 people at once

 

LOL i meant area in making more simple is it uk or ire

 

Lol, i am in glasgow