Nokia Dbox2

I'm using windows XP and WS FTP Pro. I cannot change the duplex settings on my network card, there is no such option.

Here's the Dbox IFA log :

debuhttp://Hallenberg.com boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS


will verify ELF image, start= 0x800000, size= 152952
verify sig: 263
Branching to 0x40000


U-Boot 1.1.2 (TuxBox) (May 23 2004 - 21:44:01)

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Sagem, BMon V1.3
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB

FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 1 0
...............................................................
Un-Protected 63 sectors
### FS (jffs2) loading 'vmlinuz' to 0x100000
### FS load complete: 631075 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 631011 Bytes = 616.2 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK

------ Extra Informations ------
Selected Network adapter: Intel(R) 82566DC Gigabit Network Connection - Packet Scheduler Miniport (0)
IP-Adress of the Network Adapter: 192.168.0.5
IP-Adress of the Dbox: 192.168.0.202
Comport: Communications Port (COM1)
Operatingsystem: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
CPU 1: Intel(R) Pentium(R) 4 CPU 3.00GHz @ 2990 MHz
CPU 2: Intel(R) Pentium(R) 4 CPU 3.00GHz @ 2990 MHz
Filename of the Images: sportster_12_11_05_1x.img
Imagetype: One Flash
DBOX-IFA Version: 2.3
------ Powered by http://www.dboxservice-hallenberg.de ------[/quote]

With the crossover cable & null modem cable connected to both dbox & computer start IFA find your intended image on computer you want to flash with, tell it your net card if you have 2 & also yes for null cable press enter, then power off dbox and power it back up it should then start to unflash old image & flash new image

caswain

 

i found an image All new Laky Pro 1... I have connected both cables with my box n laptop.. do i have to leave box on first.. or just turn it off

 

if you read the previous message by me caswain look at the bottom of message and follow this inst

caswain

 

Already tried that. The log hangs on :

Uncompressing Kernel Image ... OK

The Dbox returns to the channel display without flashing.

Can't connect through FTP either.

 

Hi can someone please help me i have overwritten the nagrarom7 file on my sagem dbox and i still dont have any channels, i am based in glasgow on vm, i really need this fixed to watch the game tonight, lease help

 

3 network card there i know my modem network card.. but donno other 2.1 is TAP VPN ADAPTOR - packet shedular miniport .. 2nd broadcam netXtreme 57xx gagabite controller- Packet shedular minipor.. Which one should i choose and also do i click Yes or No on Did u connect Null modem if yes then which Port

 

did you manually put the codes & still doesnt work?

 

just a thought have u tried a different img file to test if original one is a bummer

caswain

 

not sure on your net card BUT, yes to null and if u only have one on computer then com1 is a good choice
why not try all three cards in turn to see what happens slow but you will find the right one in the end
caswain

 

The box freezes when manually trying to update. The firmware is very old (2005). Yes I have tried a different image file. It's not my box, I'm trying to flash and update it for someone else. Can you please confirm the IP settings I listed are correct?

 

if your using a null cable the ip address does not matter as it will automatically find the best address it self

caswain

 

ok .. win i click start its asking for a restart.. when i click yes its resart my computer... And then am back to here.. Should i click No this time

 

If I use FlashXP will it pick up the IP automatically?

 

I know you said it was win xp BUT I would still update your IFA to 3.1.1
I see you are using DBOX-IFA Version: 2.3 also the address looks ok

caswain

 

casswin am on settings page its askin for ip and all that stuff when i click start its givin me an error on other langugage

 

NO this is a different kettle of fish, best use IFA if you can't sort ip address out
caswain

 

No i followed these instructions:

get flash fxp > ftp

2 get the file > http://www.4shared.com/file/43880742/b756ed13/nagrarom7.html

and unzip it

3 plug an ethernet cable in to your computer and box.

4 go to dbox then network on your box remote.

5 go to flash fxp on your computer and pick file then quick connect.

6 type your ip address from the box and put user name as root and password as dbox2 and connect.

if it doesnt connect change your box ip and dns and default gateway the same: 192.168.000.003 and then pick start\restart network on the box.

7 once connected go to var\keys and put the file in and overwrite.

8 wait a few seconds and your box will come back on.

 

follow this n see if it works?

http://www.satkings.org/forum/showthread.php?t=7448

wher in glasgow m8? im in around that area

 

I will have a look, i am actually in inverclyde but thought it would be easier to post Glasgow

 

Hello

Does anyone have a tutorial guide as to how to upload an image using the null modem method.

Unfort i have a box that is stuck in kein system and as i do not know the ip address of the system my ftp client is not connecting anymore.

Also the image i uploaded was a 1x for a Sagem dbox , from what i have read these tend to me 1x boxes , does anyone know if they also have 2x as well ?

Many thanks