Nokia Dbox2

fix it lol sorry ... can pick them up from ebay very easy to fit and could have a nice blue 1 lol same as me

 

read what i have said

laky-pro 1(from BIGMAQ tool-bar)

Image flashing assistant dbox2(GOOGLE)

 

click the link below ifa is in there thankyou turner123

 

Is it possible to continue debug mode without LCD,as there is 3 screws on the box that I cant get of I looked on eBay and they cost £20 + P+P which I dont mind but if I cant get the box opened it would be a wast of money,what do you think?

 

Has anyone got the LCD EPG to work in Laky Pro 1

the image is really good but can't get it to work (even with using the fix)

Just get "no EPG info" on LCD

cheers

 

billie goto the link below i have put a file in there for you about your debug its in a folder called 1debug is it or isnt it
hope this helps

 

hi everyone, im new to this site and this is my first thread, im basically looking for a bit of help, i have a nokia dbox2 with digital worldz pro on it, i have got it to the keylist.txt file and pressed number 4 on remote but there is no codes in there anymore to change.. can anyone advise on why this could be please, would the box need to be flashed again - im in the newcastle area is there anyone near this area that can sort these boxes out for a price or is it a simple job.
Thanks in advance

 

Much like others on here my D Box stopped working a couple of weeks ago!! however i attemped the below but the options on my dbox arnt the same!! how do you know which dbox you have i.e. 1 or 2??

 

ive flashed my box using these instructions. everything seems to be fine at the moment. thank you for the step by step guide to fixing the box, you are my new best friend :]

 

Nevermind got it back to normal now

 

Hi, can anyone help me out with a commando 9.25 x1 image.

I have the x2 image but i have come up with a kein system - need to reflash with x1 image.

Thanks.

 

ksingh309 look in oggnogg's link page 142 dbox/images

 

Why you doing a service scan just add the Service&Bouq files for your area
alot handyier

 

oggnogg does it matter what image you flash on your box. i have flashed my box laky pro image but i see you dont have this in your files. am i better flashing sagem boxes with andromeda v2 or will the image i have be ok?

 

i just could not get my d box 2 working
but this worked , serial cable only no cross over needed

takes a bit longer to do but follow the instructions step by step and it works

first download the lacky pro 1 image
and the file from the link here

the file metioned can be found here:
http://rapidshare.com/files/106657439/u-boot.mot.html


How To Flash A Dbox2 Using Serial Cable Only.

This guide has been written for those who, like myself, found that
the only avenue left open to them was to flash their Dbox2 using a serial
modem lead, as the normal method of using Image Flashing Assistant
(IFA) had not been successful. Make sure before you start this procedure
that you print this info out to make it easier to follow and that you place
the attached file (u-boot.mot) in the root of C drive.

Ignore all quotes "" as they are simply there to simplify
matters. Please note that all the input text is "case sensitive" so keep it
in lower case only, no CAPITALS.

To start with switch off Dbox from the mains and connect it to
your PC using serial modem cable only, as this method does not require
the use of any network cables or ports. Start up your computer and then
start Hyper Terminal by selecting "Start", then "Run" and then type in
"hypertrm". This will start Hyper Terminal.

Hyper Terminal first asks you to give the new connection a name
and an icon, so call the session "dbox" but we can forget about the icon.
Click OK. Then when it says "Connect using" select your appropriate com
port, usually com1. DO NOT select TCP/IP (Winsock). Then you have
to configure the Com port properties, any errors here and the PC will not
communicate with the Dbox, so please double check they are as
follows:-

Bits per second - 9600
Data bits - 8
Parity - None
Stop bits - 1
Flow control - Xon/Xoff

Press OK to save settings once you have double checked they are as
above. Hyper Terminal should now say that it is "connected" in the
bottom left hand corner of its window. Now press and hold the "UP"
button on your Dbox (not the remote) and turn the power to it back on.
Once you see writing like the example given below displayed in the
Hyper Terminal window it is safe to release the UP button (normally
within seconds).

Êdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-29.b7.19.07.00.00-d2
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26160, &_data 0x26160, &_edata
0x29c50
debug: &_end 0x347dc, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root>

At the prompt type "dl 800000" then press Enter. This message
should appear "S record load, offset: 800000"
OK, now click on the "Transfer" tab at the top of Hyper Terminal and
select "send text file", then when the pop up box appears select "All
Files" from the drop down menu at the bottom and then you can
negotiate to the location that you have stored the file named "u-
boot.mot", for this example we will use the root of C drive. Once you
have found it click on it and press "Open" to start the file transfer. At this
point you need to find something to do for 45 minutes or so . There is
also no on screen verification that it is actually doing anything, but have
faith.

After the file has been successfully transferred this message should
appear:-

"dl: start address 0x800000"
"dbox2:root >"
"dbox2:root >"

If so then type in the following:-

"chorus 800000" then press Enter. This process starts the file we have
just downloaded. We need to stop the attempted connection by pressing
the "ctrl" and "c" keys together (ctrl+c) on the keyboard. You need to do
this two or three times until the message "Abort" appears. Then type the
following:-

"loadb 120000 115200" then press Enter. U-boot announces "## Switch
Baud rate to 115200 bps and press ENTER...". In Hyper Terminal stop
the connection by selecting "Call" then "Disconnect". Click "File" then
"Properties" then "Configure" and change the "Bits per second" from
"9600" to "115200". Click on OK twice to leave the menus.

Select "Call" from Hyper Terminal then "Call" from its menu to
reconnect to Dbox. Press Enter on the keyboard to proceed to next step.
U-boot announces "## ready for binary (Kermit) download to
0x00120000 at 115200 bps". Click on "Transfer" again on the top of
Hyper Terminal and select "Send File". At this point you direct the
program to the image that you wish to download into your Dbox. Just
use any one of the images available from the download section as they
are all "Without Bootloader" already. Once image is selected choose
"Kermit" Protocol from the drop down menu at the bottom. Click on
"Send". At this point you need to find something to do for another 45
minutes or so . However, this time you can clearly see the progress of
the transmitted file within Hyper Terminal and the LCD on the Dbox will
show "loading kernel" during the process.

After transfer is complete u-boot announces:-
"## total size = 0x007E0000 = 8257536 bytes"
"## start ADDR = 0x00120000"
"## Switch baud rate to 9600 bps and press ESC"
In Hyper Terminal stop the connection by selecting "Call" then
"Disconnect". Click "File" then "Properties" then "Configure" and change
the "Bits per second" back from "115200" to "9600". Click on OK twice to
leave the menus. Select "Call" from Hyper Terminal then "Call" from its
menu to reconnect to Dbox. Press "Escape" key on the keyboard to
proceed to next step. U-boot prompt appears again " = > " so finally
type in these instructions:-

"protect off 10020000 107fffff" then press Enter.
"erase 10020000 107fffff" then press Enter and wait approx 1 minute till
it erases all sectors (70 in total).
"cp.L 120000 10020000 1f8000" then press Enter. This starts the internal
Image Flashing process. Wait approx 2 minutes and "Done" should
appear in Hyper Terminal window.

Shut down Hyper Terminal program
(you need not save anything) unplug Dbox2 from the mains and remove
serial lead too. Then apply power to your Dbox2 and hopefully you have
just done what you thought was impossible. Well done

 

Can anyone help I have a sagem d.box, live in bolton gtr manchester (ntl/virgin area) and have lost all my channels.

Can anyone give us any advice how to sort this mess out.

Ta

 

hi follow the link below i did a box for a chap in bolton just this week he is all up and runnig now if you need further help pm just to cut repeat disscussion on the forum

 

Hey guys i have a Nokia DBOX 2 (2xAMD) is there a fix out yet?

if so have you got the link to the fix?

and have you got a step by step / list of things to do?

i have the correct RS232 cable (NULL MODEM CABLE)

cheers guys. Mike.

 

ANIBODII CAN U TELL ME HOW TO PUT THE KEYS INTO A NOKIA DBOX, WHERE DO U HAVE TO NAVIgate too using the remote,, its urgent,, plzz,, nd thakns in advance

 

hi start back on about page 70 when all this started up its been answered milloions of times over now