Nokia Dbox2

set your box to these settings just check that they are correct as follows:-
Press dbox button on remote
Scroll to settings press ok
Scroll down to network press ok
In the menu you should have the setting of the dbox
Ip address 192.168.1.110
Subnet mask 255.255.255.0
Broadcast 192.168.1.255
Default gateway 192.168.1.1
Dns server 192.168.1.1



set pc to 192.168.1.109
255.255.255.0
192.168.1.255

make sure you disable all other network conections and just use the local network conection, one done open ftp

host 192.168.1.110
user root
password dbox or dbox2 or if using commado image pass is commando

if still you cant connect you will need to flash with ifa, as password could be anything

null cable and crossover cable is needed then

any further help pm and ill send a detailed tut of my own

 

Give it a go Mate ............Paul

 

Pm Sent
It sounds to me like your useing the wrong cable
Crossover rj45 from D Box to Pc
Straight cable from router to d box .....paul

 

It looks like soulefl is using an router and only for FTPing a normal patch cable for an router with enabled DHCP is good enough.
The magic words are enabled dhcp at the dbox and automatic at the pc.

 

Hope someone can help, I have a dbox2 with the image team commando 7.5

I believe I have downloaded all the up to date keys and also the files:

nagrarom7.bin
nagrarom10.bin
nagrarom11.bin

I have uploaded the files to the var/keys folder and update the file key.txt also I currently have the EMU is set to newcam and I am unable to get the free to air channels or the locked channels? I have tried setting the EMU to mgcam and also evocam with no joy. Every channel is coming up waiting for EPG, should I just reflash the box or is it the case of just updating a file somewhere?

Sorry if there is a solution in a previous post but I have spent around 5 hours trying to get the box working and it is still not playing ball.

 

once you have the roms in turn box off at the wall turn on everything will pop on just give it a lil time to come on or if no luck download this and pop this whole key file in overrite everthing then unplug back in wait on a channel once on and it ll update and you ll be back with us

http://www.4shared.com/dir/6805509/db5717a9/keys.html

 

Cheers Paul, gent as always. Also thanks to Mgb.

 

are there any guides on how to flash the dbox, and what cables to use,i am trying to fix it for my father in law

 

When tryin to flash a dbox2 these are the steps i take and it never fails, unless its a crap image deppending, were you source them from, my images are always 2x, because I have the intel 2x chips inside my box. (you can look through the holes on the lid of the box and see inside and just make out the letters on the chips).

Other older boxes like segams will take 1x image, again same process
but again all testing I have done is on 2x images..

Depending on the current status of the dbox, either currently working with an image with FTA channels working properly etc or a kien system message on the front lcd... the screen stays black & the box wont boot up..these steps should help a bit at least..

You will need-
1: Dbox2 :| an image to use for flashing.
2: pc or laptop with RJ-45 connection
3: null modem cable
4: OR
5: network cable (i dont use both together)
6: Image flashing assistant

Working system -
(settings on the dbox)
Network setup -
static IP address - 192.168.0.20
subnet - 255.255.255.0
default gateway - 192.168.0.1 (your router or PC IP )

Network Setup
connect your network cable to your router / router to your pc using standard RJ-45 patch cables, if using a peer2peer network setup, plug the network cable into the dbox2 then the other end into your pc's network card, assign your pc a static ip to allow the dbox2 and the pc to connect with each other.

1: grab your self a download of IFA (Image flashing Assistant)
2: load it up and select the image to flash,
3: select your network card from the drop down list,
4: click next and it will minimize to the task bar, with a new console window opened up, (this wont display any info, only with a connected Null Modem cable connected, thats later)
5: after you click next go to your Dbox2 unplug it from the wall, wait 2 or 3 sec then plug it back in, if all is well you should see the LCD reading FLASHING once it reads FINISHED unplug your box from the wall...
dont plug it back in yet.
6: Go to your PC and stop IFA or else when you plug back in your dbox2 it will start the flashing process again and we dont want that.
7: after the program stops go to your dbox and start it up,

If the system starts up then you know its all worked well channel scan and see what happens , if you recieve a Kien system error of some kind on the lcd or the screen stays black, chances are that your image is crap, go source another and follow the steps bellow...

Kien system msg (cant remember at this point in time what the error is spelled like somthing along those lines anyway)

Get your self a Null Modem cable, not goin to need any network setup for this, hook it up to the serial port of the dbox2, other end to your port on your pc, i use a Shuttle based pc so never had any problems with serial..

once its hooked up get IFA ready with your Good image, select the cable to flash with and press next, this will output information to the console window which has just poped up, plug in your dbox to the power, if all is good the flashing msg will appear adn bobs your unlce wait for it to finish and unplug from power, go to pc and stop IFA

 

hi to all. i have been using the codes from big mac toolbar to update my d box. i have been on the toolbar today and noticed the update codes are not there. can anyone help me please.

 

instead putting the new codes in put the au in then you wont need to put codes in all the time

 

LATEST KEYS FOR ALL PROVIDERS

*REMOVED*

 

Hi all,having trouble with dbox2.mate tried to flash new image which he's done a few times but this time nothing happens.front of box says loading kernel but just stays that way.can't seem to communicate with box through pc either any suggestions thanks. brad

 

hi there mate you have had a bad flash you need to use ifa to over come this, null cable cross over cable and a good image and you ll be sorted pm me if you need more help as all this has been answered before

 

thanks turner, i'll give it a go but using same image on other boxes no probs.

 

yea its ok just try to reflash it with same image maybe something just timed out sometimes happenes its not a massive problem

 

hi does anyone know about the streaming from dbox to pc ? the stage were i am at connect dbox to the router then i type in the dbox ip in the address bar all fine, i stream to the pc not a problem can see the tv on pc, but when i got to record it records, now my problem starts were does it record to? cant seem to find it anywhere, still pics screen pics are in a file called png, only time i can see the stills is if i got to upload a pic to an image hosting site, iv tried an png viewer but still no joy, any help would be great thanks

 

hi i have a pdf file about how to stream video from your pc to dbox if you want it , i got it from a link on this site but can not remember where just pm your email and ill send it you ok

 

hi thanks for the file dont mean to sound ungratefull but i have prob every file goin lol

my problem is i can stream not a problem i can record, but the recordin is not visable to my computer???

if i am on the net and you need to browse you comp through the net to upload things, i can see what i recorded or the stills i took from the tv

ill take a picture and upload it ere so people can see what i mean

 

hi all please read above and click the link to see what i mean any help would be great

http://docs.google.com/Doc?id=dfc4x5bm_4crh8x8hb