Nokia Dbox2

sorry to change the subject a little but the antenna connection on my dbox has snapped off and was wondering if it could be fixed or will i have to buy a new dbox.

 

i think you can solder a new1 on or just simply buy a new tuner unit and replace the whole tuner again soldering is envolved if your not clued up on it get some1 who is to do it for you

i know this is repairing something what your not fixing but it gives you an in sight what it all looks like

http://www.youtube.com/watch?v=h3zwx_Tb9tI

 

ok

try that thanks turner123

 

cheers mate!!!

 

hey thanks to turner123 got my dbox working again top guy a credit to this forum, fixed while i waited and also showed me how to do it myself for future changes

 

plz can someone help me. ive tried to flash my mates sagem dbox with lakey pro but it has come up an error and says something like be careful what your flashin 1x or 2x. it then says when i reboot the system it will come up kein system. is there something i can do to fix this problem or is the box no good.
help plzzzz

 

awwww you owe your mate best part 150 lol, you knacked his box up lol.... sorry just pulling your leg... you have just flashed it with a wrong image ie 1x on a 2x chip vise versu use if to get out of it sagem are 1x mostly nokia are 2x chips, take heed of the warnings lol

correct image located here 1x http://www.4shared.com/dir/7509661/d1af2196/images.html

 

hi turner, having trouble connecting the boxes together now. will the ip address i put in the box still be on it? i cant get into the box at all now so wont be able to put a new ip address on it.
i downloaded the commando image 1x hopefully this will do the trick.
maybe giving up tonight though, start work at 5 lol.
any help would be great

 

the box dont have an ip address anymore ifa assigns it a temp 1 and uses the mac address to get the image back on again use your null and cross over cable you should nt have any problems

 

hi turner, hope your on here tonight.
tried to flash box through the ifa but keep getting these two messages.

"the program issued a command but the command length is incorrect"

and

"the UDT-port 67 and/or 68 is already used by application"?, processID:1068" the boot server would not work!
please close application.

any ideas?????????????

 

the UDT-port 67 and/or 68 is already used by application this means the port is being used either end it going through task manager and ending it that way or just reboot your comp then try again put your image on the desktop open ifa serarch for the image next select the ethernet and select the null and com port number it is then select start click ok until dbox waiting to start comes up then plug it in at the wall if noting happens unplug back in again until your screen on the ifa says loading software

 

hi turner, for some reason i pressed ok on the ifa and it worked-very strange, anyways i tried your commando download but couldnt get any channels so i downloaded the laky pro image designed for the 1x boxes and it worked fine. thanks for your help.
ps how can you tell the difference between 1x and 2x boxes. i know you said thst sagem are most likely to be 1x but i have flashed a sagem that must have been 2x. its just to save me the hassle really.
thanks again

 

ifa tells you if you are flashing a wrong image to the box then you know its the opposit, were you got it from off me commando there is a 1x and 2x versions all is needed is to scan then wait on a channel and it will update without fail and channel pop on

 

Hi turner123
I have been following this thread ever since they changing codes for nokia Dox 2 and ever since then I've been using TheChatterBox.cc Toolbar formarly (mjjj) to change codes. But I'm sick and tired of doing it now I have a few questions for you if you can kindly answer this for me.
1. I currently have Commando Image (I'm not sure what version) on my Dbox2 and if I flash my dbox2 to IFA image will I sill have to keep changing codes when NTL change codes ??
2. what is a crossover cable ?? is it same as a network cable ?
3. I have blocked some of the channels because of my kids and if I flash with IFA will I be able block any channel I want to ??
4. If I flash to IFA will I have all the channels I had previously.

Hope you can considerate to answer all my questions. Thanking you in advance.

 

just reflash with a new image that dont need the codes.

 

goto page 167 of this thread get yourself ftp program and follow the tut i put on, then with the link were you got your ftp from get the nagrarom 7 10 11 and ftp them into the key folder on your dbox(unpack them before you do send as they are in zip-rar archive) when promted to over rite click ok, also your password will be commando, once all done nothing will be changed on your box, other than you wont need to update it no longer

 

Hi, Im not the greatest of the techies but i tried my best to put in the new keys into my db0x. However every time i change and save, nothing happens, it doesnt save.

Also i can't change the channel list now anymore, in fact i can't save any sort of settings.

I used to be able to ftp files onto the dbox, but now it doesnt let me do that aswell, cos i was trying to upload a new keylist.txt on to my db0x, as i wasnt able to change it from the box itself.

so its kinda stuck in a read-only mode.

Has anyone experienced this before, or knows how to solve this problem

It'll be much appreciated.
Thanks

 

Hi guys after about 6weeks of pulling my hair out not being able to get an ftp connection to a dbox2 i bought a new laptop plugged it in and put all the software on it at first i could raed the files on the dbox but i could nt transfer on the new image now so i turned it off. next day when i had more time i put it back on to try the image flashing assistant but the but will not boot anymore it freezes at loading kernal anyone any ideas .ps im now using a new laptop with vista

 

i have just managed to put the lacky pro onto my other box via ftp the screen on the box has never worked so ive no idea what it says but i did it all as per forum tuts it told me flashed succesfull rebooting now went off and didnt come back on i used 1x image and opened box its def 1x box now i have 2 boxes not working wish i had stuck to putting codes in ever other day