Nokia Dbox2

Hi, I've had a sky+ box in my livingroom for a while (no subscription, cancelled it once i got my dbox) and I'm able to get the basic channels through there fine, including a few other 'adult' ones that I'd like to somehow get onto my dbox if this is possible?

Babestation and the like, channel 906 and up... they are free to air I believe as I can see them fine without a subscription... are these able to be got on the dbox?

 

Hello again,
Just wondering if someone could give a clue as to what to do next? Should I just re-scan? I've put in the same codes as my neighbours box, with no luck.
Thanks for any replies
Sam

 

Hi All,
Just posted a new thread requesting some assistance (see below), although should maybe have just posted here. Can anyone help me please?

http://forums.afterdawn.com/thread_view.cfm/692911#4214501

Cheers


Hello All,
I am trying to flash a new image onto my nokia dbox2 using IFA and it keeps freezing at the same point (log file below). Any help/advice would be appreciated - let me know if you need any more detail
Thanks, Rob.

ïdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>
dbox2:root> seteth
ethaddr 0x1001ffe3
ethaddr: 00:50:9c:1a:f1:ed
dbox2:root>
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.2, My IP 192.168.0.202
debug: Sending TFTP-request for file C/dboxifa_tmp/tftpboot/u-boot
will verify ELF image, start= 0x800000, size= 140008
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


U-Boot 1.1.6 (Tuxbox) (Jan 8 2007 - 22:58:00)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.0.2; our IP address is 192.168.0.202
Filename 'C/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 192.168.0.2; our IP address is 192.168.0.202
Filename 'logo-lcd'.
Load address: 0x100000
Loading: *##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.0.2; our IP address is 192.168.0.202
Filename 'C/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 192.168.0.2; our IP address is 192.168.0.202
Filename 'logo-fb'.
Load address: 0x100000
Loading: *####################################
done
Bytes transferred = 179877 (2bea5 hex)

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 1  0

Bank # 1: INTEL 28F320C3B (32M, bottom boot sect), 32 bit

Size: 8192 kB in 71 Sectors
Sector Start Addresses:
10000000 (RO) 10004000 (RO) 10008000 (RO) 1000C000 (RO)
10010000 (RO) 10014000 (RO) 10018000 (RO) 1001C000 (RO)
10020000 (RO) 10040000 (RO) 10060000 (RO) 10080000 (RO)
100A0000 (RO) 100C0000 (RO) 100E0000 (RO) 10100000 (RO)
10120000 (RO) 10140000 (RO) 10160000 (RO) 10180000 (RO)
101A0000 (RO) 101C0000 (RO) 101E0000 (RO) 10200000 (RO)
10220000 (RO) 10240000 (RO) 10260000 (RO) 10280000 (RO)
102A0000 (RO) 102C0000 (RO) 102E0000 (RO) 10300000 (RO)
10320000 (RO) 10340000 (RO) 10360000 (RO) 10380000 (RO)
103A0000 (RO) 103C0000 (RO) 103E0000 (RO) 10400000 (RO)
10420000 (RO) 10440000 (RO) 10460000 (RO) 10480000 (RO)
104A0000 (RO) 104C0000 (RO) 104E0000 (RO) 10500000 (RO)
10520000 (RO) 10540000 (RO) 10560000 (RO) 10580000 (RO)
105A0000 (RO) 105C0000 (RO) 105E0000 (RO) 10600000 (RO)
10620000 (RO) 10640000 (RO) 10660000 (RO) 10680000 (RO)
106A0000 (RO) 106C0000 (RO) 106E0000 (RO) 10700000 (RO)
10720000 (RO) 10740000 (RO) 10760000 (RO) 10780000 (RO)
107A0000 (RO) 107C0000 (RO) 107E0000 (RO)
Using SCC ETHERNET device
TFTP from server 192.168.0.2; our IP address is 192.168.0.202
Filename 'kernel-yadd'.
Load address: 0x100000
Loading: *#################################################################
#################################################################
##
done
Bytes transferred = 675073 (a4d01 hex)
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 675009 Bytes = 659.2 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Starting pid 11, console /dev/console: '/etc/init.d/rcS'

dbox2 - ImageFlashingAssistent

- Hallenberg.com -


Writing backup: 1152k von 8064k (14%)nfs: server 192.168.0.2 not responding, still trying

nfs: server 192.168.0.2 not responding, still trying

------ Extra Informations ------
Selected Network adapter: Intel(R) PRO/100 VE Network Connection - Packet Scheduler Miniport (0)
IP-Adress of the Network Adapter: 192.168.0.2
IP-Adress of the Dbox: 192.168.0.202
Comport: Communications Port (COM1)
Operatingsystem: Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
CPU 1: Intel(R) Celeron(R) CPU 2.80GHz @ 2800 MHz
Filename of the Images: Blade Quad 2x.img
Imagetype: Two Flashs
DBOX-IFA Version: 2.3
------ Powered by http://www.dboxservice-hallenberg.de ------

 

Do you know the ip of the box
Will it boot
Wot image is on it
Try FTP
You dont say why you post the BOOTLOG
Makesure you only have one network card running when Flashing
And enabled to 10 and 1 half .......Paul

 

by the looks of it to me it looks like the comport is causing the problem i have had this issue when using a pci express card com port on my laptop, just loops then net net net net net n so on, so what i sugest is flash it as bigdunk said, or just try using ifa with just a xcross over cable works everytime for me....

 

I had a similar problem using com port with ifa, on laptop it shows that progress has stuck while on dbox it has completed and has loaded new image, but with just a x over cable works straight away no problems.

 

Hi bigdunc,Iv tried to do this but still no luck picking the channels up. It tells me to do a scan which i have thought i wouldnt have to do??? The box doesnt seem to be picking up any channels but it pics up the transponders? I tried FTP over 2 images and everything seem to be in the rite place but still nothing. Its the same as when i use the IFA with images that hav all files added? Is this the end of the Box??

 

pls pls help me!!!!

ive got a sagem dbox2 with commando 6 on it ive tried to use the hallenberg ifa but to no joy!!!! in using vista on me laptop tried through me rj45 and rs232 but it keeps on saying bootnet failed!
please help me b4 my gf kills me for spending hrs n hrs trying to fix it lol! many thanks ryan

 

i will save your bacon lol....nothing wrong with ...VISTA... thats all i have used to flash a box (but xp to debug)...anyways have a look at my vid i have done this vid without the rs232 just a xover cable as you ll see nothing comes in the com terminal etc....also set your ethernet a static ip for eg 192.168.1.110 !!!??? firewalls off etc antivirus off etc, if still fails get back with the info/questions you need

http://www.youtube.com/watch?v=x-1hmqxmw4c

 

Hi all.

Still using the laky pro image, is there anything better out there ?

Get a bit of stuttering sometimes and missing a couple of channels, hasn't bothered me enough to sort it in the past but got a second box now so i can have a play and not worry about messing it up.

 

Turner thanks for your reply but im still having no joy with it used just the ethernet cable no joy went back to the null and the 1st bar of lade would come up and go no further!!!
then i would restart it then it would just load to the team commando screen 1.1.2 i think! keeps saying bootnet failed/ elfcopy failed :16

im starting to loose faith im good old friend sagem dbox2!
watched your film you make it look easy i give up!

HELP!!!!!!!!!!!!

 

If it is a sagem get blade quad and use gbox to stop chirping, gbox will not autoroll, so leave it on evocam and then there is a function in the blade menu- press blue, and it allows you to transfer evocam keys to gbox.

It also has many other features that laky pro does not.

 

hi all i just flashed the blade trinity final image and when goin to do the channel scan its askin me for a pin code. does anyone hav any idea what this is plz. cheers in advance

 

0000 numbers is usualy the default code for everything give it a try.

ruprect i shoulda said its a nokia dbox2, cheers.

 

are you definitely using a crossover rj45 (not just a 'normal' ethernet cable) - this is the problem I had originally, which is why i'm asking - apologies if you're using the right cable!

 

Hi bigdunc
Tryin to flash new image as box stopped workin - gets halfway thru start-up then re-boots and so on. Don't know IP as can't turn it on to check, but logfile from ifa says 192.168.0.202. Current image is sportster pro 1.1.4.

Tried using ifa with xover and with/without null modem - nothing happens without, but with null modem hallenberg logo appears on LCD, then 'lade software', then 'backup' with status bar and then it freezes - posted log in case it contained any useful info (means nowt to me!)

Spoke to lad I got it from at work and he says sounds like my PC thats not responding, rather than the box - any ideas? I read somewhere about disabling DHCP sensing (or something similar) could that be the prob? sorry to go on, lol, first post was too short, this ones far too long Cheers to everyone for your suggestions, together we will crack it (I hope, can't live without footy for much longer!!) Rob

 

dhcp is nt really needed to be disabled (media sensing) its a patch you apply to your registry..if the guy you bought it from thinks it your comp, then ask him to do the good thing and flash it on his comp!! see what he says...then if it flashes then it is a prob on your comp etc if it dont then it could be a prob with the box

 

Thanks 123turner - to be fair, the lad I bought it from has offered to reflash it for me, but I wanted to have a go myself in case something goes wrong again in the future - looks like I may have to admit defeat!

 

There is nothing wrong with asking for help from him at least that way you ll be shown what to do etc for the future and all questions from you he should be able to answer.....