Nokia Dbox2

Can you also send me a guide, I have sent you a pm containing my email address.

Many thanks

 

Hi there, I have just done the scan to get the movie channels back, I have them all now except the 2 premier channels, I have checked in other & others but they are not there, do you think I have lost them completely? Thanks for any help, Margaret

 

Hi,

Can anyone tell me if you can flash dbox with null modem cable only?

Thanks

 

Hi,

Can anyone tell me if you can flash dbox with null modem cable only?

If this is possible how can it be done?

Thanks

 

as2002. i had the same problem with my dbox whereby it wouldn't save any of the settings. i've now put a new image on and the box works better than ever. not sure why it happened or how to fix the problem with the current software, but you can change the network settings and then do 'start/restart network now' which will allow you to ftp the new image over to the /temp folder on the dbox. hope this helps

 

I finally got my d-box working with all channels, last week. Everything worked a treat until this morning. First it stalled, no response to the controler. So I turned it off at the switch and when I turned it back on, nothing. The screen stays blank, the display on the front of the box does not show anything, but when you hit any button on the remote the little red light flashes, so I know that there is still power in there.
Does anyone have any advice.
thanks

 

hi guys ive been asking for help from someone who lives in leicestershire in this thread for a couple weeks now surely someone lives remotely near leicestershire im desperate here!!

lol thanks

 

Hello Everyone.... I need help!!!!!!!! Ive flashed my dbox2 sagem 1 x l with a 2 xl image.... How can i flash another image!!!! HELP!! And the guy from Leicestershire i may be able to help as i know i little im here if you need me.... thanks everyone.....

 

Also if someone as got the lastest images for a sagem dbox2 1 xl it would very appercated.... Thanks again,, Jabulous

 

RandyRaji

I tried what you said to do, but but when i click "Show Active Network Settings" it still has "Network Inactive"

Thanks

 

Please Could someone tell me if you can flash dbox with using a Null Modem Cable Only

If so how do i do it?

Thanks

 

Yes you can use IFA.

 

Ive done it!!!

If ever you flash the wrong type of image to your dbox2 (e.g 1x to a 2x or vice versa) Then you have to re flash with the right image using a null modem cable an a crossover cable use IFA and it should flash the image....

If anyone needs more details please get in contact...

Jabulous

P.s
If anyone as any 1x images please pm me and ill send my email addy to you... Thanks

 

m trying to flash my box Via IFA but the status is on the following, and doesnt seem to be doing anything

ôdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/4095/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.101, My IP 192.168.0.202
debug: Sending TFTP-request for file D/dboxifa_tmp/tftpboot/u-boot
ôdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/4095/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.101, My IP 192.168.0.102
debug: Sending TFTP-request for file D/dboxifa_tmp/tftpboot/u-boot

 

Hi could anyone please send me the nebies guide to d box? i have lost the entire boxes channels need to resart all over again HELP ME!

 

All the guides can be found at http://www.techno-source.co.uk/phpbb , including latest software ect

 

Hi

can anyone help with my problem posted recently

thanks

 

Something at your pc is blocking the transfer for u-boot.
Winxp firewall or av soft or a other security soft.

 

Ive tryed turning them all off, is there some sort of patch that can be downloaded to turn off all firewalls etc?

thanks

 

hello i think i can flash now, however i would like to put in a request for updated services and bouquets files for leicester if anyone has them

thanks