Nokia Dbox2

Hi..
You should have 3 cams available
newcam...evocam...and mgcam.
Hope this helps
Chris

 

Can anyone tell me, im living in dublin and im only getting about 50 channels on the dbox, is there something i can do to get more?

 

Its the nokia dbox 2 and its running the commando 6

 

try the new irish cables file posted by mgb17 over in the dbox in ireland forum

 

Hi all.

I'm probably just being a dweeb but I'm hunting and hunting for a step-by-step guide to setting up my Nokia DBox. Just bought one off fleabay that runs Linus Neutrino but it came without any instructions. Any help please would be very much appreciated.

Many thanks in advance.

 

Search this forum, there's loads. to start with, get the DBox bible called the "dbox 2 FAQ by pt.1"

 

Sorry to be fairly poor at this, but could you link to it please?

Would be much appreciated.

edit: nm. Appears I already had it... lawl.

Cheers anyway.

 

I have had a Nokia Dbox2 for a while now. It has the Sportster 1.7 UK image installed

My settings have stopped saving! and was wondering if there is some sort of option which i have triggered

I dont really want to have to re flash!

Thanks

 

Sounds like the memory in the box is full from failed recordings or something,reflash is your only option AFAIK

 

I have been trying to record to my PC without success

I have also tried flashing via IFA, all settings are correct etc, but when i boot my box up to be flashed, nothinghappens, it just boots up as usual

 

Hi Mate
would it be possible to have a copy of commando5 , both x1 and x2 images. Secondly does commando5 need keys inputting manually?
many thanks
please ps to edited by ddp

 

Hope someone can help.

My DBox2 has stopped receiving channels. I still receive internet over the same cable so its not the cable. Has Virgin done something to the signal?

It wont let me scan for channels and I have tried 5 different images and 4 different service files/bouquets that used to work and none work at all. I have also tried versions of the magic keys and nowt!!!

Im wondering if my box is faulty now?

Any help greatly appreciated.

 

Hi, I tried putting a new image on my dbox and I got the "loading kernal" message and it wouldnt boot up.

Could someone help please, as I`m getting really frustrated now. Ive tried all the tutorials and its just not doing the "flashing" message on the LCD.

I have got IFA to connect to my DBox for sure via crossover cable(dont have a null), because its got the IFA logo on the tele and a IFA Creators logo on the LCD, but on IFA it looks as if its working as it says "DBox Pinging ok" and it looks like its transferring data but then it says

***Adapter Desc: Marvell Yukon 88E8001/8003/8010 PCI Gigabit Ethernet Controller - Packet Scheduler Miniport (via IpHlpApi #0)
***MAC address: 00:15:F2:43:04:CE Local IP: 192.168.0.101
***BootP server started... Port 67
***TFTP server started... Port 69
BootP> Request from 00:50:9C:19A:0B (assuming that this is DBox).
BootP> Created dynamic ARP entry for DBoxIP 192.168.0.202 with MAC 00:50:9C:19A:0B
BootP> Answer sent!
TFTP> Started TFTP-Transfer for "F:\dboxifa_tmp\tftpboot\u-boot"...
TFTP> Transfer finished, sent 274 blocks
BootP> Created dynamic ARP entry for DBoxIP 192.168.0.202 with MAC 00:50:9C:19A:0B
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "logo-lcd"
TFTP> Started TFTP-Transfer for "F:\dboxifa_tmp\tftpboot\logo-lcd"...
TFTP> Transfer finished, sent 16 blocks
BootP> Created dynamic ARP entry for DBoxIP 192.168.0.202 with MAC 00:50:9C:19A:0B
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "logo-fb"
TFTP> Started TFTP-Transfer for "F:\dboxifa_tmp\tftpboot\logo-fb"...
TFTP> Transfer finished, sent 352 blocks
TFTP> Non-BootP TFTP-transfer requested "kernel-yadd"
TFTP> Started TFTP-Transfer for "F:\dboxifa_tmp\tftpboot\kernel-yadd"...
TFTP> Transfer finished, sent 1319 blocks
1 - mountd: mount: path: F/dboxifa_tmp/yaddroot/
0 - nfsd: nfslookup: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply

and eventually it all stops and doesnt do anything. The If I restart the Dbox it says either "loading Kernel" or "Kein System".

Ive tried 3 different images and non of them are working.

This is my step by step of what Ive done :

Contol Panel - Network Connections - Properties

I then changed my Network card Speed & Duplex to 10Mbps Half Duplex

then i changed my internet protocol settings to :

192.168.0.101 into the "IP address"
255.255.255.0 into the "Subnet mask"
192.168.0.1 into the "Default gateway"

then ive clicked Ok and came out.

Now with my Dbox unplugged, I open IFA 3.2.0.354

I choose the image I want and select my network card.

and then press start, it comes up with a information telling me that the pc is getting ready and to press ok and tuen my dbox on.

I press ok and power up the dbox but the dbox goes to "kein system" and IFA doesnt start, the stop button is greyed out and the start button is ready to click. So I unplugged the Dbox and pressed start then plugged the dbox in.

This is when i thought I`d cracked it, as IFA started moving and a IFA logo came onto the LCD, but as I said above it just stops and says that log.

really getting desperate now, been at it all last night and all today.

Cheers

 

how can i turn off audio description thanks

 

Try pushing the Green button on your remote and select the other audio option ................Paul

 

hey paul do you know of any where that still does the dreambox 500 t?????

 

hi can anyone help me with my sound on my d-box it sounds like birds squeaking

 

Just Googled it . None Availible
Must be able to get them somewere......Paul

 

Can you get the on screen menus up
Wot image is on the box Now
Wot does it say after scanning ......Paul

 

thanks Paul.
Rreceived your pm kindly. all sorted.
many thanks again.
Quick question. do these images need any keys or not?