Nokia Dbox2

Or you could just click on the little 'person' icon (to the right of report an offensive post) on a post by the person you want to PM.

 

Hi,
Paul did u get my e-mail, anyway i have been messing around and it looks I have really screwed up as i now have kein error and i cannot access the box. Any Suggestions

cheers

 

Check your E Mail STE..............Paul

 

hi guys im interested in buying a itgate tgm 220, can someone help me and direct me to the cheapest place and the quickest delivery place, tried ebay but dont trust them.
any help would be well apreciated
cheers

 

Try Sat Kings mate tell them i sent you .....Paul

 

hi, just wanted to know how do you change the cams etc wateva theyre called, also when changed or restarted do they affect the box in any way, and is it possible when summat goes wrong to get it back to the original state?

setanta sports1 no picture jus sum fuzzy background sound?

thanks

 

well on commando 8 its

dbox/settings/softcam/or yellow button ...
then dwn to active softcam press ok 2 pick the 1 u want ie evo/ new/mg
then back up 2 start/restart softcam or red button

just make note which softcam runnig .if no better with the outhers then just put it back it u want

on outher images just look back in the post m8 ..there u will find all u want 2 now



good luck

 

hey, anyone up for helping me out, I've just flashed my dbox 2x, alls ok but the picture don't show on the channels and it says "WAITING ON TIME, ERROR CHANNEL NOT AVAILABLE"

ALL HELP APPRECIATED!!!!!

 

Wot image is on the box now mate ...............paul

 

hi fecker,
can you please let me know what image did u use, and where can i get a good image for a dbox2
thanks

 

the image i have on my dbox is the Modded UK Sporster Pro x2.img. the image loads but it says
waiting for time...
error channel not available
and if i press the ? button twice it says
no epg found

Ne Help much appreciated


you can find images and tools at this website
http://www.humyo.com/Pages/FileManager?window=FrameSet&dir=33642849&_session_id=1a7d88bf91cad706fd123db0e4674e20

 

Post your scan settings mate
Try the box direct into the wall feed...............Paul

 

Hi,
can anyone send me the beginners guide to the nokia dbox 2, I have just got one from germany and can't get the channels I want.
Paul

 

er u go take a look hear

dummies dbox2 tutorial


and also look back in the post u will find lots of info there
good luck

 

how do i get commando 8 or 9 pls.

 

Thanks for the help, have had to double check but have found out I actually bought a dbox 1 not a 2, already in debug mode.

 

just look 2 the link 4 post back

good luck

 

Hi all,

I'm really having trouble flashing my Dbox.

I flashed over the network first but couldn't find any channells so flashed again but the flash didn't work properly as the dbox wouldn't boot correctly.

I ordered a null modem cable that came today and i'm having problems flashing with IFA.

It doesn't seem to want to flash using this method and shows the error

Ädebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast

When starting to flash. When it does try and start flashing it gets as far as


[newcamd-v6.10b 15:03:22] compiled May 9 2006, 17:19:17
[newcamd-v6.10b 15:03:22] Warning: Error opening config file /var/tuxbox/config/newcamd/newcamd.conf, using defaults.
[newcamd-v6.10] scce_open: Device or resource busy
[newcamd-v6.10b 15:03:22] Error opening scce device. All emu and cws will be disabled.
[newcamd-v6.10b 15:03:22] /dev/dvb/adapter0/ca0: Device or resource busy
[newcamd-v6.10b 15:03:23] Warning: ca device init failed. Slot1 card will be disabled
[newcamd-v6.10b 15:03:23] Error: nothing left to do
[newcamd-v6.10b 15:03:23] Error setting control words in ca dev
nhttpd: error while loading shared libraries: /lib/libfreetype.so.6: invalid ELF header
Neutrino exited with nonzero exit status, restarting...
nhttpd: error while loading shared libraries: /lib/libfreetype.so.6: invalid ELF header
Neutrino exited with nonzero exit status, restarting...
nhttpd: error while loading shared libraries: /lib/libfreetype.so.6: invalid ELF header
Neutrino exited with nonzero exit status, restarting...
nhttpd: error while loading shared libraries: /lib/libfreetype.so.6: invalid ELF header
Neutrino exited with nonzero exit status, restarting...

and then continually loops with that segment of code.

Any ideas?

 

I purchased one of these boxes from ebay! which has the heading of NOKIA DBOX SATELLITE TV D-BOX DBOX D BOX DEBUG MODE , so iv got this and i have an active sky subscription (basic channels), now you will need to ignore me as im a bit stupid, but it wont do anything, I get the FTA channels, and a blank screen on all the other channels, even the ones i subscribe to, now iv tried this, with and without the card, scanned for channels, but i get the epg and a black screen, what am i doing wrong. HELP, damsel in distress.....;-) any help would be much appreciated.