Have you lost ALL channels or just a few?? If you lost all channels, then you need to install new key numbers or possibly a new bin file. If just a few channels and most are still working, then the missing channels were moved to other transponders or no longer being broadcast. A rescan will usually find the missing channels if they were moved. If they are no longer being carried by the provider then nothing can be done. Jerry
jerry, i lost about 10 or more channels like ( speed channel,cmt, lifetime and some of the sports channels.which scan should i do? i know other people that live here in ky and they haven't lost the channels. thank you for you help.
As a rule for myself, I usually delete all channels about once a month and rescan each sat. That way I keep all channels up to date. If one of the people you know, that have your missing channels working can give you the transponder number for each missing channel, then all you need to do is scan those transponders to find the channel. Jerry
Hi Jerry, I just wanted to let you know that my Pansat 3500SD also got totally killed...I have no power at all. About a month ago it happened to a buddy of mine with the same receiver. I also suppect it is something in the steam, however I'm no expert. In addition, I don't know where I can get it fixed can someone plase let me know. Thanks DocJLep
Join this site below and check the 3500 sections. You may find an answer there, if not post the exact problem and what caused it on that site. To my knowledge, all the providers can do to your box is change the encryption to scramble the channels. They can't shut it down so it has to be something else that causes it to go completely out. http://www.future-fta.info. Jerry
Jerry follow my reply t you on 02/18, you absolutly rigth about people like us, so far at least I can watch a lot of channels.The only thing like you said I have to update the keys every once awhile. 00: 2A81C78E397F7F09AA5B0253D0EA7F7B Active 01: A73D6527D15553107B407C49F9E4AADD last update on 02/26
Haven't got my system to work yet. My pansat 3500s doesn't come with a sd memory card. What is the purpose of the sd card, will the system work without it ? The manual stated 128MB, can I put in a 256MB or bigger instead ? Is there a password reset switch somewhere on the box ? The person I got it from has a password on it and I cannot get hold of him. Thanks.
hi Jerry i notice you always put in the url for the keymaster 2.0, about a month ago if was updated to 3.0 i seemed to have lost that and when i try to download it i get an error message when prompted to download the new version. anything i can do?
Hey Jerry, I have question regarding autoroll. I do have the lastest bin loaded on my pansat which is the 112, but it when the bev key changed the autoroll didn't take effect. It didn't change the keys for me and I would have to enter it manually. What should I do to get it to roll?
From what I have been reading, you should turn off auto roll for BEV right now and enter the keys manually until a new BEV bin shows up. Jerry
Sorry about that. I thought I did that a while back. I added a new link for keymaster 3.0 under my sig now. Jerry
Hi I have a problem with my pansat 3500 which is a clone that i fixed and it was working fine until few days ago. I've been changing the keys manually and didnt have problem with it til it started showing me the message "wait for picture" every 5 min. So i put the new keys , it works for 5 min. then it says "wait for picture" and I go on the net and the keys havnt been touched while my receiver is mixing them by itself . Does anybody have a solution ? pls help
hey jerry my friend has a viewsat extream and want me to show him how to put the keys in can u tell me how so i can get it going thx
can some 1 post this info so i can get this veiwsat extreme going,jus need to put the keys in thats all
Here you go Crowbar91. Fresh off the press. Installing new keys Example keys: Key 00-F29874441C6577D8 Key 01-17E3E11D894E5345 To Fix ViewSat’s 1. Menu > Installation > Code > Nagra 2. Using large Black “LEFT” or “RIGHT” remote ARROW keys tell you see “Dish 01 01 00” 00 - B4 ED 24 E3 BC C1 82 69 08 - F2 98 74 44 1C 65 77 D8 09 - 17 E3 E1 1D 89 4E 53 45 88 - B4 ED 24 E3 BC C1 82 69 89 - E1 B0 09 C3 C1 D0 C8 A1 Make sure you add them to the 08 line and the 09 (Bold) line then save, when you are changing the keys look at the bottom of the screen and you will see the directions on how to change letters, use number pad to change numbers. ------------------------------------------------------------------------ The keys shown above were just an example. Use the latest keys off Keymaster of keyripper. Hope this helps. Its not my work, just a C/P from one of my other sites. Jerry
Jerry Everything seems fine with my Pansat latley. For some reason channel 126 (the baby development channel) isn't playing any sound. Any reason for this. Is there anything that I can do? All the other channels are working fine. Scott
My guess is that there is a problem with the channel, not your equipment or setup. Problems with 1 channel usually is on their end. Jerry
